NBS Source
List your products

Arboles UK Ltd

Manufacturers and Suppliers of Laboratory Taps, Vulcathene, Ceramic Sinks and Emergency Devices

+44 (0)1204 388814 www.arboles.co.uk

Sort by:

Showing 1-10 of 10

Bench Mounted Emergency Eyewash

Bench mounting eyewash with retractable flexible hose.

Conforming and certified to ANSI/SEA Z358.1-2009, DIN 12899-3-2007 and EN15154-1-2006

Features and Benefits: 

Brass valve assembly with flexible braided stainless-steel hose.
Robust Rilsan plastic coating in Yellow (RAL1016)
Water Inlet: G1/2” BSP Female. Bench hole drilling 42mm diameter.
Inlet pressure: Recommended 2 bar/ Minimum 1.5 bar/ maximum 8 bar. Flow rate: Eyewash 15 L/min regulated.

Fixed Swan Neck Laboratory Water Tap

Fixed swan neck tap with fixed serrated nozzles.

  • Applications: Standard laboratory water tap for all applications where header tank supply is present (Full WRAS approval)
  • Options: Removable or full-bore nozzles are available on request.
  • Construction: All brass body, Rilsan plastic coated, light white (RAL9016). Chemical resistant plastic ABS handwheel, Identification coding to DIN13792
  • Connection and mounting: ½” BSP male flat ended shank x 60mm long with back nut. Standard anti-rotation base with location pin. Two mounting holes 22mm and 5mm diameter required template enclosed.
  • Pressure and Flow: Maximum pressure 100PSI (Recommended 20PSI) Flow Rate @ 20 psi = 12 Litre/min.
  • Spares: Handwheel Assembly: Pt No 960180, valve headwork, Pt No 950148. Removable nozzle, Pt No 900130

Floor Mounted Emergency Combination Shower & Eyewash

Floor mounting combination emergency drench shower and eyewash.

Conforming and certified to ANSI/SEA Z358.1-2009, DIN 12899-3-2007 and EN15154-1-2006

Features and Benefits:

Galvanised steel piping, brass valves plated with ABS plastic shower head and bowl assy.
Robust Rilsan plastic coating in Yellow (RAL1016)
Water Inlet: G1 1/4” BSP female.
Inlet pressure: Recommended 2 bar/ Minimum 1.5 bar/ maximum 8 bar. Flow rate: Shower 110 L/min, Eyewash 22 L/min regulated.

Fluid Category 5 Backflow Preventer

Anti-Siphon Nozzle Part Number: 900100-W

This product is designed specifically to protect the water supply against contamination from back siphonage within the laboratory environment.

The nozzle must be permanently fitted to the outlet of the laboratory water tap with Loctite 648. The fitting of this nozzle will introduce the statutory air gap. Advice must be obtained from your local water authority to ensure compliance with current water supply (water fittings) regulations 1999. This product is manufactured with a ½” BSP female inlet connection, suitable laboratory taps can be supplied on request.

This is the only FULLY approved AUK-3 category 5 nozzle available.

H Pattern Mixer Tap With Movable Swan Neck

Balanced flow Swivel swan neck hot and cold mixer tap with aerated nozzle.

  • Applications: Standard laboratory mixer water tap.
  • Construction: All brass body Rilsan plastic coated, white (RAL9016). Grey rotating handwheels, Identification coding to DIN13792
  • Connection and mounting: 2 x ½” BSP male flat ended shanks x 60mm long with back nut. Two mounting holes 22mm diameter at 178mm centres are required.
  • Pressure and Flow: Maximum pressure 100PSI (Recommended 20 PSI)
  • Flow Rate @ 20 psi = 35 Litre/min.
  • Spares: Spare handwheel assembly: Pt No 960180 Valve headworks, Pt Nos 950148 WRAS: Approved

Pillar Bib Tap Removable Nozzle

Pillar tap with removable serrated nozzles.

  • Applications: Standard laboratory water tap for all applications where header tank supply is present (Full WRAS approval)
  • Options: Fixed or full-bore nozzles are available on request. Hot water.
  • Construction: All brass body, Rilsan plastic coated, white (RAL9016). Chemical resistant plastic ABS handwheel, Identification coding to DIN13792
  • Connection and mounting: ½” BSP male flat ended shank x 60mm long with back nut. Standard anti-rotation base with location pin. Two mounting holes 22mm and 5mm diameter required template enclosed.
  • Pressure and Flow: Maximum pressure 100PSI (Recommended 20PSI)
  • Flow Rate @ 20 psi = 12 Litre/min.
  • Spares: Hand wheel Assembly, Pt No 960180 Valve headwork, Pt No 950148

Two Way Bench Mounted Drop Lever Gas Tap

Standard laboratory gas tap for Bunsen burner type applications. Suitable for both natural and LPG gas applications.

Two-way high visibility droplever gas tap fixed serrated nozzle. Integral anti-rotation pin.

All brass body, Rilsan plastic coated, white (RAL 9016). Identification coding to DIN13792.

Two Way Pillar Bib Tap Cold Water

Single Pillar tap with Twin outlets fixed serrated nozzles.

  • Applications: Standard laboratory water tap for all applications where header tank supply is present (Full WRAS approval)
  • Options: Removable or full-bore nozzles are available on request.
  • Construction: All brass body, Rilsan plastic coated, white (RAL9016). Chemical resistant plastic ABS handwheel, Identification coding to DIN13792
  • Connection and mounting: ½” BSP male flat ended shank x 60mm long with back nut. Standard anti-rotation base with location pin. Two mounting holes 22mm and 5mm diameter required template enclosed.
  • Pressure and Flow: Maximum pressure 100PSI (Recommended 20PSI) Flow Rate @ 20 psi = 12 Litre/min.
  • Spares:Handwheel Assembly, Pt No 960180 Valve headwork, Pt No 950148

Wall Mounted Emergency Drench Shower

Wall mounting emergency drench shower, supplied with elbow mounting plate.

Conforming and certified to ANSI/SEA Z358.1-2009, DIN 12899-3-2007 and EN15154-1-2006

Features and Benefits:

Galvanised steel piping, brass plated valve with ABS plastic shower head. Robust Rilsan plastic coating in Yellow (RAL1016)
Water Inlet: G1” BSP female. (Elbow backplate)
Inlet pressure: Recommended 2 bar/ Minimum 1.5 bar/ maximum 8 bar.
Flow rate: 110 L/min regulated.

Wall Mounted Emergency Eyewash

Wall mounting eyewash.

Conforming and certified to ANSI/SEA Z358.1-2009, DIN 12899-3-2007 and EN15154-1-2006

Features and Benefits:

Galvanised steel piping and mounting bracket, brass valves plated with ABS bowl assy.
Robust Rilsan plastic coating in Yellow (RAL1016)
Water Inlet: G1/2” BSP
Inlet pressure: Recommended 2 bar/ Minimum 1.5 bar/ maximum 8 bar. Flow rate: Eyewash 22 L/min regulated.

Showing 1-10 of 10