Bitumen-based membranes, sheets and fabrics
Find and specify bitumen-based membranes, sheets and fabrics from top manufacturers with NBS Source. Browse products for Bitumen-based membranes, sheets and fabrics below. Classification Pr_25_57_08.
Can't find what you're looking for?
Recently verified
Showing 109-139 of 139
Visqueen Self Adhesive Membrane (SAM) - Waterproofing
Verified 5 months ago
Visqueen
Self-adhesive waterproofing membrane.
Proofex 3000
Verified 5 months ago
Fosroc International Limited
High performance self adhesive membrane.
Gas Resistant Self Adhesive Membrane
Verified 5 months ago
Cordek Ltd
Self adhesive membrane designed for adhesion to suitably primed substrates. Generally used to provide combined damp proofing and gas protection to foundation constructions.
JUTA GP®1 SAM
Verified 5 months ago
Juta UK Ltd
Bituminous gas-proof and waterproof sheet self-adhesive membrane.
JUTA WP SAM
Verified 5 months ago
Juta UK Ltd
Waterproof, self-adhesive, bituminous membrane, composed of self-adhesive SBS polymer-modified bitumen.
BauderFLEX K4E Torch-On Capping Sheet
Verified 6 months ago
Bauder Ltd
A torch-applied SBS elastomeric bitumen capping sheet.
Sikaplan®-1653 Adhered VOC Gas Barrier
Verified 6 months ago
Sika Limited
A post applied, multi-layer, polyethylene membrane for below ground waterproofing and gas protection.
Evolight - Roofing membrane
Verified 9 months ago
Mapei (UK) Ltd
Polyester based torch-on waterproofing membrane.
Polyvap
Verified over a year ago
Mapei (UK) Ltd
High performance vapour control layers.
Polyshield
Verified over a year ago
Mapei (UK) Ltd
High performance polyester based polymer modified torch-on cap sheet.
Plana V
Verified over a year ago
Mapei (UK) Ltd
Glass fibre based polymer modified torch-on underlay.
Plana P
Verified over a year ago
Mapei (UK) Ltd
Polyester based polymer modified torch-on cap sheet.
Modibond
Verified over a year ago
Mapei (UK) Ltd
Polyester based polymer modified torch-on cap sheet.
Elastobond
Verified over a year ago
Mapei (UK) Ltd
Bituminous roofing waterproofing membrane.
Xtra-Load GRM
Verified over a year ago
BMI Group UK Ltd
Self adhesive, cold applied flexible sheet gas retardant membrane.
Xtra-Load Diamond
Verified over a year ago
BMI Group UK Ltd
A high performance, flexible, self adhesive membrane.
Vapourbar Vapour Control Layer
Verified over a year ago
BMI Group UK Ltd
A high performance, glass reinforced, metal-lined bituminous vapour control layer, applied using ‘pour-and-roll’ techniques.Vapourbar is suitable for use on all types of deck, such as timber, profiled metal, and cementitious substrates, as well as suitable existing bitumen and asphalt roofs.
Total Torch Vapour Dispersion Layer
Verified over a year ago
BMI Group UK Ltd
Vapour dispersion layer.
Total Torch Vapour Control Layer
Verified over a year ago
BMI Group UK Ltd
Vapour control layer.
TorchSafe T.A. VCL - Stripes Vapour Control Layer
Verified over a year ago
BMI Group UK Ltd
A high performance vapour control layer with a heat-activated self-adhesive underside, and an aluminium/ PET core. The upper surface has special resinous bitumen stripes which are activated by torch heating to receive and adhere the insulation board.TorchSafe T.A. VCL - Stripesis suitable for use on all types of deck, such as timber, profiled metal, and cementitious substrates.Substrates should be primed prior to the application of the membrane using Icopal S.A. Primer.
TorchSafe T.A. VCL - Stripes
Verified over a year ago
BMI Group UK Ltd
Glass-reinforced SBS modified bitumen membrane.
TorchSafe T.A. VCL - Sand
Verified over a year ago
BMI Group UK Ltd
A heat-activated self-adhesive vapour control layer with aluminium/ PET core. The membrane is suitable for use where the insulation is to be adhered to the vcl with insulation adhesive. The upper surface is finished with a plain sand coating.TorchSafe T.A. VCL - Sandis suitable for use on all types of deck, such as timber, profiled metal, and cementitious substrates.Substrates should be primed prior to the application of the membrane using Icopal S.A. Primer.
Reflex 275 Vapour Control Layer
Verified over a year ago
BMI Group UK Ltd
A multi-layer vapour control layer made from virgin polyethylene with reinforcing grid and aluminium layer giving exceptionally high vapour resistance. The high resistance of the Reflex 275 makes it suitable for use within buildings with higher levels of humidity, such as swimming pools, sports halls and kitchens. It is a loose-laid membrane and therefore intended for use within mechanically fastened warm roof waterproofing systems. Joints should be sealed with Monobond LT sealant tape.
Thermaweld FireSmart Mineral
Verified over a year ago
BMI Group UK Ltd
Reinforced bitumen roof waterproofing system.
Tecnatorch® Sand
Verified over a year ago
BMI Group UK Ltd
Roof waterproofing capsheet.
Profiles Vapour-Vent XL
Verified over a year ago
BMI Group UK Ltd
As part of the Profiles high performance roofing system, the Profiles Vapour-Vent XL membrane is a SBS-modified aluminium/ PET lined bitumen membrane applied by ‘torch-on’ application. It has with resinous bitumen stripes on the upper surface which are activated by torch-heating to receive and adhere the insulation board.Profiles Vapour-Vent XL is suitable for direct application to non-combustible substrates, such as profiled metal, and cementitious substrates, as well as suitable existing bitumen and asphalt roofs. The Profiles system is available to IMA approved roofing contractors only.
Nubit
Verified over a year ago
BMI Group UK Ltd
High performance bitumen membrane with high strength base.
Monofilament 250 Vapour Control Layer
Verified over a year ago
BMI Group UK Ltd
Monofilament 250 is constructed using a three layered membrane combination and incorporates a high density polyethylene reinforcement grid which ensures high tensile strength and excellent water vapour resistance.It is for use within buildings with low to medium levels of humidity. It is a loose-laid membrane and therefore intended for use within mechanically fastened warm roof waterproofing systems. Joints should be sealed with Monobond LT sealant tape.
Monarflex EavesGuard
Verified over a year ago
BMI Group UK Ltd
Designed to satisfy the requirements of BS 5534 and BRE Defect Action Sheet 9 which recommend the use of a more durable material for areas where the underlay may be exposed.
Imperma SBS
Verified over a year ago
BMI Group UK Ltd
Bituminous tanking and damp-proof membrane.
Imperma Protection Layer
Verified over a year ago
BMI Group UK Ltd
A flexible, water resistant membrane with an integral mineralized surface for impact resistance on one face.
Showing 109-139 of 139