NBS Source

Fixed roof ventilators, terminals and accessories

Uniclass 2015 category Pr_30_59_29

Sort by:

Showing 1-36 of 85

Airtrak PE Pitched Eaves Ventilators

Airtrak PE Pitched Eaves Ventilators

Nicholson STS Ltd

Provides an unobtrusive ventilation path into the roof void at the bottom of a pitched roof slope.
Airtrak AB2 Abutment Ventilator

Airtrak AB2 Abutment Ventilator

Nicholson STS Ltd

Abutment ventilator for built-up bitumen roofing.
Airtrak CV Cheek Ventilator

Airtrak CV Cheek Ventilator

Nicholson STS Ltd

Provides ventilation into vertical lead cladding.
Airtrak CS Comb Strip

Airtrak CS Comb Strip

Nicholson STS Ltd

Comb strip designed to prevent the entry of birds and vermin into the batten void beneath profiled tiles at the eaves.
Airtrak PRV Pitched Roof Ventilator

Airtrak PRV Pitched Roof Ventilator

Nicholson STS Ltd

Provides point ventilation to lead roofs and vertical cladding where appropriate.
Airtrak VT Ventilated Edge Trim

Airtrak VT Ventilated Edge Trim

Nicholson STS Ltd

Provides a continuous ventilation detail to the bottom edge of a plywood fascia or cladding.
Airtrak CP Change of Pitch Ventilator

Airtrak CP Change of Pitch Ventilator

Nicholson STS Ltd

Provides ventilation at the change of pitch in a slated or tiled mansard roof.
Airtrak CL Cladding Ventilator

Airtrak CL Cladding Ventilator

Nicholson STS Ltd

Provides ventilation into metal cladding from 60° pitch to vertical.
Airtrak F10/ F25 Fascia Ventilators

Airtrak F10/ F25 Fascia Ventilators

Nicholson STS Ltd

Provides ventilation to the roof void over the eaves fascia board.
Airtrak IL Inline Ventilators

Airtrak IL Inline Ventilators

Nicholson STS Ltd

Inline ventilators for use at the foot or head of vertical or pitched cladding to provide a continuous airgap for ventilation.
Airtrak LV Lead Roof Ventilators

Airtrak LV Lead Roof Ventilators

Nicholson STS Ltd

Range of compact point ventilators for flat or pitched lead covered roofs up to 30°.
Airtrak RTV Ridge Tile Ventilator

Airtrak RTV Ridge Tile Ventilator

Nicholson STS Ltd

Provides ventilation of most ridge tiles using traditional wet laid methods.
Airtrak PV Pitched Valley Ventilators

Airtrak PV Pitched Valley Ventilators

Nicholson STS Ltd

Provides continuous ventilation detail to a pitched valley between two roof pitches.
Airtrak AB1 Abutment Ventilator

Airtrak AB1 Abutment Ventilator

Nicholson STS Ltd

Abutment ventilator for fully supported metal, membrane and liquid applied roofing.
Airtrak VR Ventilated Ridge

Airtrak VR Ventilated Ridge

Nicholson STS Ltd

Introduces ventilation at the head of slated or tiled pitch where it reaches the ridge.
Airtrak BRV Between Roll Ventilators

Airtrak BRV Between Roll Ventilators

Nicholson STS Ltd

Range of between roll ventilators for lead ridge details.
Airtrak VA Ventilated Apron

Airtrak VA Ventilated Apron

Nicholson STS Ltd

Introduces ventilation at the head of slated or tiled pitch where the roof meets an abutment wall.
Airtrak LB Layboard Ventilators

Airtrak LB Layboard Ventilators

Nicholson STS Ltd

Range of ventilators providing 25 mm ventilation over the layboard into the roof void.
Airtrak RV Roll Vent

Airtrak RV Roll Vent

Nicholson STS Ltd

Roll ventilator designed to ensure that the airpath at the eaves is unobstructed by the insulation where it sits above the wall plate.
Airtrak EC Eaves Carrier

Airtrak EC Eaves Carrier

Nicholson STS Ltd

Support profile to prevent ponding at eaves caused by a backfall in the roof underlay membrane.
Airtrak AB6 Abutment Ventilator

Airtrak AB6 Abutment Ventilator

Nicholson STS Ltd

Ventilator for use at a parapet wall abutment.
Airtrak AB5 Abutment Ventilator

Airtrak AB5 Abutment Ventilator

Nicholson STS Ltd

Abutment ventilator for hard metal roofing.
Airtrak EA Eaves Ventilators

Airtrak EA Eaves Ventilators

Nicholson STS Ltd

A range of profiles that provide a 25 mm ventilation path into the roof void at the eaves or edge of a flat roof.
Airtrak MV Mansard Ventilators

Airtrak MV Mansard Ventilators

Nicholson STS Ltd

Range of mansard ventilators for slate and tile roofing is used to introduce ventilation into a flat roof where it falls out onto a pitched roof.
Airtrak AB3 Abutment Ventilator

Airtrak AB3 Abutment Ventilator

Nicholson STS Ltd

Abutment ventilator for mastic asphalt (vertical kerb).
Airtrak AB4 Abutment Ventilator

Airtrak AB4 Abutment Ventilator

Nicholson STS Ltd

Abutment ventilator for mastic asphalt (splayed kerb).
Window Acoustic Trickle Ventilator Sonovent D

Window Acoustic Trickle Ventilator Sonovent D

Renson Fabrications Ltd

Adjustable flap ventilator with acoustic attenuation, for mounting under tiles over occupied roofs.
Aerial Outlet Adaptors

Aerial Outlet Adaptors

BMI Group UK Ltd

The new Outlet Adaptor offer is a modular system consisting of two parts which will be bought separately
Rapid Eaves Vent System

Rapid Eaves Vent System

BMI Group UK Ltd

Eaves vent system.
Rapid Roof Vents

Rapid Roof Vents

BMI Group UK Ltd

Roof vents.
Solar Outlet Adaptors

Solar Outlet Adaptors

BMI Group UK Ltd

The new Outlet Adaptor offer is a modular system consisting of two parts which will be bought separately - the Outlet Base tile and the Outlet Adaptor for either Cable, Solar or Aerial itself.
Type EROV

Type EROV

Enhanced

Cavity Trays Ltd

Roof ventilator roll.
ERV External Roof Ventilator

ERV External Roof Ventilator

Enhanced2 variants

Cavity Trays Ltd

External roof ventilator for use with flat and low pitched lead covered roofs.
ECSC Eaves Continuous slate course

ECSC Eaves Continuous slate course

Enhanced

Cavity Trays Ltd

Used in place of slate course across bottom of slate roof, the ECSC eliminates commencement lap & cover problem.
Type RAV-FL

Type RAV-FL

Enhanced

Cavity Trays Ltd

External roof ventilator for use on flat roofs at abutments with masonry.
Hardedge Strip Special Eaves Protector

Hardedge Strip Special Eaves Protector

Enhanced

Cavity Trays Ltd

Eaves underlay support strip.

Showing 1-36 of 85

Feedback