You are viewing content for United Kingdom.
Choose a country to see content for your location. Changing region will navigate you to the homepage.
Ventilation and ducting
Ventilation includes a range of ventilator requirements such as roof ventilators, wall grilles, extract hoods, etc. Browse products for Ventilation and ducting below.
Can't find what you're looking for?
Recently verified
Showing 1-36 of 291
AIRTRAK® LB Layboard Ventilators - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Range of ventilators providing 25 mm ventilation over the layboard into the roof void.
AIRTRAK® AB2 Abutment Ventilator - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Abutment ventilator for built-up bitumen roofing.
AIRTRAK® EC Eaves Carrier - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Support profile to prevent ponding at eaves caused by a backfall in the roof underlay membrane.
AIRTRAK® VT Ventilated Edge Trim - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Provides a continuous ventilation detail to the bottom edge of a plywood fascia or cladding.
AIRTRAK® PV Pitched Valley Ventilators - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Provides continuous ventilation detail to a pitched valley between two roof pitches.
AIRTRAK® PE Pitched Eaves Ventilators - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Provides an unobtrusive ventilation path into the roof void at the bottom of a pitched roof slope.
AIRTRAK® AB6 Abutment Ventilator - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Ventilator for use at a parapet wall abutment.
AIRTRAK® RV Roll Vent - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Roll ventilator designed to ensure that the airpath at the eaves is unobstructed by the insulation where it sits above the wall plate.
AIRTRAK® AB1 Abutment Ventilator - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Abutment ventilator for fully supported metal, membrane and liquid applied roofing.
AIRTRAK® SLV Slate Ventilator - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Low profile roof ventilator.
AIRTRAK® PRV Pitched Roof Ventilator - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Provides point ventilation to lead roofs and vertical cladding where appropriate.
AIRTRAK® F10/ F25 Fascia Ventilators - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Provides ventilation to the roof void over the eaves fascia board.
AIRTRAK® CS Comb Strip - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Comb strip designed to prevent the entry of birds and vermin into the batten void beneath profiled tiles at the eaves.
AIRTRAK® CL Cladding Ventilator - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Provides ventilation into metal cladding from 60° pitch to vertical.
AIRTRAK® IL Inline Ventilators - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Inline ventilators for use at the foot or head of vertical or pitched cladding to provide a continuous airgap for ventilation.
AIRTRAK® BRV Between Roll Ventilators - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Range of between-roll ventilators for lead ridge details.
AIRTRAK® EA Eaves Ventilators - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
A range of profiles that provide a 25 mm ventilation path into the roof void at the eaves or edge of a flat roof.
ROOFPORT® RPV - Roof Void Point Ventilators
Verified 6 days ago
Nicholson STS Ltd
Roof void point ventilators with an integral fly screen mesh, and a ventilation area of 15 000 or 30 000 mm².
AIRTRAK® LV Lead Roof Ventilators - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Range of compact point ventilators for flat or pitched lead covered roofs up to 30°.
AIRTRAK® AB5 Abutment Ventilator - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Abutment ventilator for hard metal roofing.
AIRTRAK® AB3 Abutment Ventilator - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Abutment ventilator for mastic asphalt (vertical kerb).
AIRTRAK® CV Cheek Ventilator - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Provides ventilation into vertical lead cladding.
AIRTRAK® VR Ventilated Ridge - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Introduces ventilation at the head of slated or tiled pitch where it reaches the ridge.
AIRTRAK® CP Change of Pitch Ventilator - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Provides ventilation at the change of pitch in a slated or tiled mansard roof.
AIRTRAK® VA Ventilated Apron - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Introduces ventilation at the head of slated or tiled pitch where the roof meets an abutment wall.
AIRTRAK® RTV Ridge Tile Ventilator - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Provides ventilation of most ridge tiles using traditional wet laid methods.
AIRTRAK® MV Mansard Ventilators - Roof Ventilation System
Verified 6 days ago
Nicholson STS Ltd
Range of mansard ventilators for slate and tile roofing is used to introduce ventilation into a flat roof where it falls out onto a pitched roof.
AIRTRAK® AB4 Abutment Ventilator - Stainless steel linear ventilator
Verified 6 days ago
Nicholson STS Ltd
Abutment ventilator for mastic asphalt (splayed kerb).
Cast Iron Cellar and Stove Vent
Verified 9 days ago
Cast Iron Air Brick Company
Cast iron vents for basement, cellar and rooms
Glidevale Protect In-line® Plain Tile Ventilator - Roof Tile Vent
Verified 13 days ago
BPD Building Product Design Ltd
In-line® Housebuilder Plain Tile vent with a 7,500 mm² ventilation area.
Glidevale Protect Venta-Line TLE In-line® Tile Ventilator - Roof Tile Vent
Verified 13 days ago
BPD Building Product Design Ltd
Flat Interlocking Ventilator with a 10,000 mm² ventilation area, in compliance with BS 5250. For use with thin leading edge (TLE) roof tiles.
VentraTech Bat Access Slate
Verified 15 days ago
Burton Roofing Merchants Ltd
The VentraTech Bat Access Slate provides a discreet and un-interrupted path from the roof exterior to the batten cavity/ interior of the roof.
VentraTech Hybrid Slate Vent
Verified 15 days ago
Burton Roofing Merchants Ltd
Hybrid slate vent replacing one tile and allowing for ventilation direct into the roof space.
VentRidg® System - Roof Ridge Ventilator
Verified 22 days ago
Hambleside Danelaw Ltd
A universal ventilating GRP ridge tray system to provide high level roof ventilation in applications where a traditional mortar bedded ridge tile appearance is required.
Solshield Vent Matt 25mm (Plus Connectors and Components)
Verified 26 days ago
Solco by Bluebay Building Products
A venting and drainage membrane system.
DucoStrip
Verified 27 days ago
Duco Ventilation & Sun Control NV
Compact flap window ventilator.
Showing 1-36 of 291