Compare

Resin Flooring System Resuflor Topseal

Name: Resin Flooring System Resuflor Topseal
Brand: Sherwin-Williams
SKU: d4VHN4uhrxKihNMqA3ojSr

Verified by manufacturer 4 months ago

Sherwin-Williams

Third party certifications:

ISO 9001 Quality Management
Certificate type

A water based epoxy resin floor system for application as an industrial floor coating at a thickness of around 100 microns.

Jump to:

+44 (0)1204 521771 Website

Application

Suitable for producing a tough seamless, hygienic ﬂoor ﬁnish. AquArmor™ S can act as a curing membrane to increase hardness of concrete by allowing full hydration of cement and can be applied to new concrete, seven days after being poured.

Can be used in the following scenarios:

As a seal for concrete.
Suitable for low to medium traffic indoor applications.
Suitable for all types of masonry, asphalt and wood substrates.
Automotive and aviation areas.
Factory units.
Warehouses.

Description

Resuflor Topseal is a water based epoxy resin ﬂoor system for application as an industrial ﬂoor coating at a thickness of around 100 micrometres. A sheen ﬁnish will be provided which can be clear or coloured and is suitable for all areas of industry where a hard wearing ﬂoor coating is required.

System includes:

Substrate.
Primer: Resuflor WB Clear (colour option also available).

Features and benefits:

Solvent-free.
Silica free.
Excellent adhesion.
Hard wearing.
Hygienic and easily cleaned.
Low odour.

General information

Color	Clear Grey Guidance for specification option: Stirling grey or flint grey. Red Guidance for specification option: Salsa red.
Finish	Anti-slip Satin Smooth
Material	Epoxy resin Resin Water-based Water-borne

Uniclass	Ss_30_42_54_75 Resin flooring systemsPrimary
CAWS	M12/10 Resin flooring M12/110 Resin flooring

Specification data - Resin flooring systems

Substrate	-
Testing	Moisture content to BS 8204.
Preparation	Preparation of existing substrates. Guidance for specification option: Substrates must be clean, sound, dry and free of surface laitance with a minimum strength of 25 N/mm². Mechanically prepare substrate to provide a surface texture that will function as a key for the resin. Remove all dust and debris. Repair significant mechanical damage, pitting and cracks. Preparation of new substrates.
Primer	Not required. Optional. Resin coating primers.
Movement joints	-
Type	Resin flooring strip movement joints.
Execution	Workmanship. Application of primers. Applying surface sealers. Applying surface finishes.

System thickness	0.1 mm.
Hardness	To BS EN ISO 1522: 83. Manufacturer guidance Pendulum hardness.
Abrasion resistance	To ASTM D4060-14, 101.5 mg. Guidance for specification option: Loss/1000 cycles.
Tensile strength (to EN ISO 527)	To BS EN ISO 527-2, 26 MPa.
Bond strength	To EN 13892-8, >3 N/mm². Guidance for specification option: Substrate failure.
Temperature resistance	Up to 45⁰C.
Chemical resistance	Good.
VOC content	10 g/L.
Coverage	60 m².
Cure time	8 hours to 8 days. Guidance for specification option: Depends on traffic conditions and temperature.
Application temperature	10—25°C. Guidance for specification option: An equilibrium relative humidity (ERH) <90%.
UV stabilization	No.
Colour	Clear. Stirling grey. Flint grey. Salsa red.
Performance	- Manufacturer guidance Durability. Water and vapour resistance.
Testing	- Manufacturer guidance Testing slip resistance. Testing bond strength.