Resin Flooring System Elladur Topcoat
Verified by manufacturer 3 months ago
ISO 9001 Quality Management
Certificate type
A high build, polyaspartic/ polyurea fast-cure floor coating system based on advanced materials, designed to provide a tough and durable gloss finish.
Application
High build UV stable system floor coating system suitable for use in:
- All industrial areas, onshore/ offshore industrial marine areas.
- Domestic areas.
- Retail spaces.
- Commercial and industrial applications.
Description
A high build, polyaspartic/ polyurea fast-cure floor system with a non-slip texture based on advanced materials, designed to provide a tough and durable gloss finish at around 500 microns thickness. Light stable with good chemical resistance and very low volatile organic content (VOC) content. The system can be applied to a variety of finishes and surfaces in a single day.
System includes:
- Substrate.
- Primer (optional): Resuprime MVT.
- Basecoat: Elladur™ SF.
- Broadcoat: 54 Mesh/0.3 mm aluminium oxide aggregate.
- Topcoat: Elladur™ SF.
Features and benefits:
- Fast curing at low temperature.
- Light non-slip texture.
- High build.
- Ultraviolet (UV) stable.
- Very low odour.
- Tough but flexible.
- Can be applied onto a wide range of substrates.
- Low VOC.
General information
Color | Black Blue Green Red |
Finish | Gloss |
Material | Polyaspartic Guidance for specification option: Polyaspartic resin. |
Uniclass | |
CAWS | M12/10 Resin flooring M12/110 Resin flooring |
Specification data - Resin flooring systems
Substrate | |
Testing | Moisture content to BS 8204. |
Preparation | Preparation of existing substrates.Guidance for specification option: Substrates must be clean, sound, dry and free of surface laitance with a minimum strength of 25 N/mm². Mechanically prepare substrate to provide a surface texture that will function as a key for the resin. Remove all dust and debris. Repair significant mechancial damage, pitting and cracks. |
Primer | Not required.Resuprime MVT.Guidance for specification option: Optional: for use if the concrete substrate moisture levels are above 75% equilibrium relative humidity (ERH) or no damp proof membrane is present. Resin coating primers. |
Resin flooring | Elladur™ SF.Guidance for specification option: Base coat. 0.3 mm aluminium oxide aggregate.Guidance for specification option: Broadcast. Elladur™SF.Guidance for specification option: Top coat. Resin floor coatings.Floor seals.High-build floor coatings. |
Execution | Workmanship.Applying surface finishes. |
System thickness | 0.45 mm. |
Abrasion resistance | To ASTM D4060-14, 144 mg. Guidance for specification option: Loss/ 1000 cycles. |
CompressiveStrength | To BS EN ISO 604, 16.2 MPa. |
Tensile strength (to EN ISO 527) | To BS EN ISO 527-2, 21.1 MPa. |
Flexural strength | To BS EN ISO 178+A1, 3.3 N/mm². |
Bond strength | To BS EN 13892-8, 3 N/mm². Guidance for specification option: Substrate failure. |
Impact resistance | To BS EN ISO 6272-1:2011, >4. |
Temperature resistance | 70°C. Manufacturer guidanceTolerant of temperatures up to: |
Reaction to fire (to EN 13501-1) | Bfl–s1. |
Chemical resistance | Good. |
VOC content | <30 g/L. Guidance for specification option: Varies depending on product. |
Coverage | Up to 250 m². Guidance for specification option: Varies depending on the product. |
Cure time | 2 hours to 8 days. Guidance for specification option: Depends on traffic conditions and temperature. |
Application temperature | Guidance for specification option: 10—25°C. An equilibrium relative humidity (ERH) <90%. |
UV stabilization | Yes. |
Performance | Manufacturer guidance
|
Testing | Manufacturer guidance
|
Sustainability data
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Third party certifications
Literature
A guide to Sherwin-Williams Industrial Resin Flooring
Resin flooring Elladur Topcoat system
Case studies
Decorative and seamless flooring supplied for atrium area to Radclyffe School