SR1 rated security fencing.
Zaun’s HiSec SR1 fence uses the 358 welded mesh configuration, which is ideal for use in applications where Secured by Design accreditation is required. The system attributes make it an excellent solution for high security applications including schools, prisons, utility suppliers or anywhere that a physical security protection is required. The fences use the prison mesh configuration making the fence system almost impossible to climb and very difficult to cut with anything other than power tools.
Fence panels are available in 2.0 m and 2.4 m height and up to 3 m wide. Coupled with Zaun’s tamper resistant fasteners, the result is a rigid perimeter fence that offers a high degree of vandal resistance and an extremely high level of through visibility. The system offers the same product benefits as the standard HiSec, but with added security. Manufacturing is subject to stringent quality control, meaning all fences are of a uniformly high quality. This system conforms to BS 1722: Part 14: Category 4 and carries certification to LPS 1175 SR1 as required for Secured by Design.
Features and benefits:
Applications:
Finish | Galvanized and polyester powder coated |
Uniclass 2015 | |
CAWS | Q40/125 Open mesh steel panel general purpose fencing Q40/27 Open mesh steel panel fencing Q40/30 Proprietary fencing Q40/430 Proprietary fencing |
Product Reference | HiSec SR1 |
Height | 2.0–2.4 m. |
Width | 3.0 m maximum. |
Fixing | Bolt downIn groundWall |
Gates | - |
Pedestrian | Not requiredRequiredSingle leaf, 1.2 m wide, or width to suit, consult manufacturer and insert requirements. |
Vehicular | Not requiredRequiredDouble leaf, 3.0 m wide, or width to suit, consult manufacturer and insert requirements. |
SecurityRating | Not requiredSR1Single Fix only. Consult manufacturer for details. |
Standard product features | Finish: Galvanized and polyester powder coated. Mesh: HiSec SR1 mesh comprising of 12.7 x 76.2 mm mesh with single 4 mm vertical wires at 76.2 mm centres and 4 mm horizontal wires at 12.7 mm centres. Posts: 60 x 40 mm or 80 x 40 mm rectangular hollow section (RHS) 2750 mm or 3100 mm m long for fixing in ground 670 mm and spaced at a maximum of 3025 mm centres. Post to panel fixing: Panels fixed to posts with full height 40 x 5 mm clamp bar with stainless steel fixings at 400 mm centres. Gates: Framed in a 50 x 50 mm RHS with Zaun HiSec mesh welded inside the frame, with slide latch. Gate supplied with rubber bump stop and two suitable gate posts. Vehicular access also supplied with drop bolts. |
Product Options | Security rating: SR1: Opportunist attack by bodily force using minimal tools (screwdriver, knife, pliers, etc.). |