High-density polyethylene (PE-HD) studded sheets
Find and specify high-density polyethylene (pe-hd) studded sheets from top manufacturers with NBS Source. Browse 47 products that are ready to use on your projects. Classification Pr_25_57_51_36.
Can't find what you're looking for?
Recently verified
Showing 1-36 of 47
Structural Drain FC25
Verified 28 days ago
Geofabrics Ltd
25 mm high density polyethylene (PE-HD) cuspated drainage board with a geotextile filter/separator bonded to a single side.
FCF25 Type 5 fin drain - Cuspated drainage board
Verified 28 days ago
Geofabrics Ltd
25 mm PE-HD cuspated drainage board fully wrapped with a geotextile filter/separator.
Pro Void Vent 25 - Gas Dispersal Layer
Verified 1 month ago
Delta Membrane Systems Ltd
Gas dispersal layer made up of a cuspated HDPE core with a geotextile filter/ separator bonded to a single side
Delta MS - HDPE Dimpled Sheeting
Verified 1 month ago
Delta Membrane Systems Ltd
High-density polyethylene (HDPE) dimpled sheeting
Delta MS Sub-Base Course Protection System - HDPE Dimpled Sheet
Verified 1 month ago
Delta Membrane Systems Ltd
A high density, polyethylene dimpled sheet designed as an alternative to traditional lean-concrete sub-base course.
Delta MS Drain - Waterproof Protection Layer For Basements
Verified 1 month ago
Delta Membrane Systems Ltd
High density polyethylene protection layer for basement waterproofing. The dimpled profile is covered with a geotextile, which provides a drainage route for groundwater.
DELTA FLORAXX - External Drainage Membrane suitable for Green Roofs
Verified 1 month ago
Delta Membrane Systems Ltd
Delta Floraxx is used on inverted roofs to drain water away from insulation panels under accessible surfaces.
Delta FM - Damp Proof Membrane - HDPE Studded Membrane
Verified 1 month ago
Delta Membrane Systems Ltd
A studded membrane designed to combat dampness and contamination in floor applications.
Delta MS20 - Cavity Drainage Membrane
Verified 1 month ago
Delta Membrane Systems Ltd
Delta MS20 is a high-density polyethylene (HDPE) dimpled sheeting with a high drainage capacity and compressive strength, suitable for high performance seepage layers.
Delta MS 500 - Waterproofing Membrane - HDPE Type C Cavity Drainage
Verified 1 month ago
Delta Membrane Systems Ltd
Delta MS 500 is a high-density polyethylene (HDPE), Type C, Cavity Drainage Studded Membrane.
DELTA TERRAXX - External drainage protection membrane - High-Density Polyethylene Dimpled Sheet
Verified 1 month ago
Delta Membrane Systems Ltd
A high-density polyethylene dimpled sheet which acts as a surface drainage layer in vertical and horizontal applications.
Delta MS 500 Fire - Fire Retardant Studded Cavity Membrane - HDPE Type C Cavity Drainage Membrane
Verified 1 month ago
Delta Membrane Systems Ltd
Type C fire-retardant 8 mm studded HDPE cavity drainage membrane
Hydroflow HM - HDPE Cuspated Drainage Membrane
Verified 2 months ago
Premcrete
Geocomposite drainage membrane
Visqueen CM8 Membrane - Studded cavity membrane
Verified 2 months ago
Visqueen
8 mm studded cavity membrane formed from 0.45 mm thick high density polyethylene (HDPE).
Visqueen CM20 Membrane - Studded cavity membrane
Verified 2 months ago
Visqueen
20 mm studded cavity membrane formed from 1 mm thick high density polyethylene (HDPE).
Newton CDM Condensation Strip - Strip to Collect Condensation
Verified 2 months ago
Newton Waterproofing Systems
An alternative to using a strip of wall membrane to create the condensation gap.
Externally Applied Drainage Membrane Newton HydroBond 410 GeoDrain - Externally Applied Drainage Membrane
Verified 2 months ago
Newton Waterproofing Systems
A non-woven geotextile filter layer thermally welded to a water impermeable HDPE (high density polyethylene) drainage membrane.
Newton CDM 508 eco Floor - 8mm Recycled Type C Cavity Drain Floor Membrane - 8 mm Recycled Cavity Drain Membrane
Verified 2 months ago
Newton Waterproofing Systems
Newton CDM 508 eco Floor is a high quality 8 mm recycled cavity drain floor membrane, for use within the Newton CDM System internally applied waterproofing system.
Newton CDM 508R - Basement Waterproofing Membrane for Waterproofing of Existing and New Build Basements - 8 mm Cavity Drain Membrane for Basements
Verified 2 months ago
Newton Waterproofing Systems
A high quality cavity drain waterproofing membrane, suitable for the waterproofing of earth retained walls, vaulted soffits and floors.
Newton CDM 520 eco Floor - Basement Waterproofing Membrane for Waterproofing of Existing and New Build Basements - 20mm Recycled Cavity Drain Membrane
Verified 2 months ago
Newton Waterproofing Systems
BBA certified, recycled basement cavity drain waterproofing membrane, part of the maintainable Newton CDM system, ideal for waterproofing both new-build basements and refurbishment projects.
Loose Laid 3mm Flooring Membrane Newton DampSafe 603 for New and Existing Floors - Loose Laid Floor Membrane
Verified 2 months ago
Newton Waterproofing Systems
A 3mm loose laid, high quality membrane suitable for use above new and existing floors. The studs allow pressure equalisation of dampness in the floor below allowing for dissipation at room perimeter.
Newton Newtonite - Non-Meshed Damp Proofing Membrane
Verified 2 months ago
Newton Waterproofing Systems
Non-meshed High density polyethylene (HDPE) damp proofing membrane (DPM) material.
Drainage Membrane Newton NewSeal 408 DeckDrain for Decks & Flat Roofs - Drainage Membrane for Decks & Flat Roofs
Verified 2 months ago
Newton Waterproofing Systems
Double cuspated, deck and flat roof drainage membrane, that incorporates a polypropylene geotextile filter layer, bonded to a water impermeable HDPE (High Density Polyethylene) core.
Newton CDM Basement Waterproofing System for Waterproofing of Existing and New Build Basements - Cavity Drain Waterproofing
Verified 2 months ago
Newton Waterproofing Systems
The Newton Cavity Drain Membrane (CDM) System is a maintainable basement waterproofing solution, certified to BES 6001 by BRE Global, ideal for new-build basements and refurbishment projects.
Newton CDM 503 - Basement Waterproofing Membrane for Waterproofing of Existing and New Build Basements - 3 mm Cavity Drain Membrane for Basements
Verified 2 months ago
Newton Waterproofing Systems
BBA certified, basement cavity drain waterproofing membrane, part of the maintainable Newton CDM system, ideal for waterproofing both new-build basements and refurbishment projects.
Newtonite Lath Mesh Membrane - 3 mm Meshed Damp Proofing Membrane
Verified 2 months ago
Newton Waterproofing Systems
Meshed damp proofing membrane.
Drainage and Water-Retention Green Roof Membrane Newton 420 Reservoir - Extensive Green Roof Drainage Membrane
Verified 2 months ago
Newton Waterproofing Systems
Unique drainage and water-retention membrane for use where a water reservoir is required for extensive green roofs of sedum, herbaceous plants, mosses or grass above decks and roofs.
Newton CDM 508 - Basement Waterproofing Membrane for Waterproofing of Existing and New Build Basements - 8 mm Cavity Drain Membrane for Basements
Verified 2 months ago
Newton Waterproofing Systems
BBA certified, basement cavity drain waterproofing membrane, part of the maintainable Newton CDM system, ideal for waterproofing both new-build basements and refurbishment projects.
Flat Loose Laid Flooring Membrane Newton DampSafe 601 Slimline - Flat High Grade Flooring Membrane
Verified 2 months ago
Newton Waterproofing Systems
A high-grade flooring membrane mainly used for isolating moisture-sensitive flooring from dampness in the floor slab, but also can be used as the floor membrane as part of the Newton CDM System.
Proofex Cavitydrain 80
Verified 2 months ago
Fosroc International Limited
High density polyethylene (HDPE) profiled drained cavity former and damp proof membrane.
Proofex Cavitydrain 200
Verified 2 months ago
Fosroc International Limited
High density polyethylene (HDPE) profiled drained cavity former and damp proof membrane.
Proofex Sheetdrain 80 - Geocomposite drainage membrane
Verified 2 months ago
Fosroc International Limited
High density polyethylene/ geocomposite drainage membrane.
JUTA GP® Void Vent 25
Verified 2 months ago
Juta UK Ltd
High Density Polyethylene (HDPE) ventilator.
JUTA GP® Void Vent 40
Verified 2 months ago
Juta UK Ltd
High Density Polyethylene (HDPE) ventilator.
Schlüter®-TROBA - External Drainage Layer
Verified 2 months ago
Schlüter-Systems Ltd
Separation and drainage layer with trapezoid shaped studs.
DD 80++ - Drainage Mat
Verified 2 months ago
Dural (UK) Ltd
Drainage mat for highly water-permeable outdoor flooring constructions.
Showing 1-36 of 47