Delta MS Sub-Base Course Protection System - HDPE Dimpled Sheet
Verified by manufacturer 5 months ago
A high density, polyethylene dimpled sheet designed as an alternative to traditional lean-concrete sub-base course.
Application
Designed as an alternative to traditional lean-concrete sub-base course.
Description
A high density, polyethylene dimpled sheet.
Features and benefits:
- Ensures good pressure distribution and low point loads through its more than 1800 dimples per m².
- 100% recyclable.
- Keeps cement grout from seeping into the ground.
- Laid straight from the roll.
- Resists acids, alkalines, oils and solvents.
- Will bear the weight of workers and wheelbarrows.
- Safely holds reinforcement-mesh spacers in place.
- Protects the foundation slab from rising damp and suitable for seepage-absorbing ground.
- Safe for drinking water and resists root penetration and rot.
General information
Color | Brown |
Material | High density polyethylene (HDPE) |
Shape | Rectangle Guidance for specification option: Supplied in rolls. |
Length | 20000 mm |
Width | 1000 mm 1500 mm 2000 mm 2400 mm 3000 mm |
Height | 8 mm |
Warranty description | 30 year |
Uniclass | |
CAWS | J40/290 High-density polyethylene/ polypropylene studded cavity drain membrane J40/47 High-density polyethylene/ polypropylene studded cavity drain membrane |
Specification data - High-density polyethylene (PE-HD) studded sheets
Stud height | 8 mm.Guidance for specification option: Dimple height. Air gap between dimples: Approx. 5.3 L/m². |
Sheet thickness | Manufacturer’s standard. |
Weight (minimum) | Manufacturer’s standard. |
Colour | Brown. |
Performance characteristics | |
Flow rate | Manufacturer’s standard.Guidance for specification option: Consult manufacturer for details. |
Recycled content | 100%. |
Service temperature range | -30 to +80°C. |
Typical compressive strength | 250 kN/m² approx. |
Modulus of elasticity to EN ISO 178 | 1500 N/mm². |
Elongation at break | Approx. 60%. |
Roll size | 20 x 1 m. 20 x 1.5 m. 20 x 2 m. 20 x 2.4 m. 20 x 3 m. |
Sustainability data
Contains Red List materials | No |
Country of product manufacture | Germany |
Recyclability | Yes |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
BIM objects
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
| Platform | Compatible | Version |
|---|---|---|
 IFC | IFC2X3 | 4 |
 Revit | Revit 2016 | 8 |
 ARCHICAD | - | 1 |
 AECOsim | - | 1 |
 Vectorworks | - | 1 |
Literature
Delta-MS Sub-base Course Installation Instructions
Delta-MS Sub-base Course Protection System
Similar products from Delta Membrane Systems Ltd
DELTA FLORAXX - External Drainage Membrane suitable for Green Roofs
Delta FM - Damp Proof Membrane - HDPE Studded Membrane
Delta MS - HDPE Dimpled Sheeting
Delta MS 500 - Waterproofing Membrane - HDPE Type C Cavity Drainage
Delta MS 500 Fire - Fire Retardant Studded Cavity Membrane - HDPE Type C Cavity Drainage Membrane
Delta MS Drain - Waterproof Protection Layer For Basements
Delta MS20 - Cavity Drainage Membrane
DELTA TERRAXX - External drainage protection membrane - High-Density Polyethylene Dimpled Sheet
Pro Void Vent 25 - Gas Dispersal Layer