Duo8 SR1
Secure fence system.
- Civic and public sector.
- Health and emergency services.
- High security.
- Industrial.
- Residential and commercial.
- Schools and education.
- Transport and infrastructure.
- Utilities.
Zaun’s Duo8 SR1 double wire system is ideal for use in applications where Secured by Design accreditation is required. It is manufactured from dual horizontal 8 mm wires sandwiching a single 6 mm vertical wire, producing a 50 x 200 mm mesh pattern that is not only strong and vandal resistance but also offers the best value. Fence panels are available in 2.0–2.4 m height and up to 3 m wide.
Coupled with Zaun’s tamper resistant fasteners, the result is a rigid perimeter fence that offers a high degree of vandal resistance and an extremely high level of through visibility.
This fencing system offers the same product benefits as the standard Duo8, but with added security and tamper resistant clamp bars and fixings.
Features and benefits:
- LPCB LPS1175 SR1 rated.
- Security Rated at SR1 by BRE as featured in the Red Book.
- Secured by Design approved.
- Designed with twin 8 mm horizontal wires.
- Open mesh pattern provides high visibility to monitor sites without restriction.
- Strong and robust for a high level of vandal resistance.
- Supplied with standard or minimal projections at the top of the panel.
- Available either bolt down, in ground or on wall.
- For low level fences a safety capping is available.
Applications:
- Civic and public sector.
- Health and emergency services.
- High security.
- Industrial.
- Residential and commercial.
- Schools and education.
- Transport and infrastructure.
- Utilities.
| Finish | Galvanized and polyester powder coated |
| Uniclass 2015 | |
| CAWS | Q40/125 Open mesh steel panel general purpose fencing Q40/27 Open mesh steel panel fencing Q40/30 Proprietary fencing Q40/430 Proprietary fencing |
| Product Reference | Duo8 SR1 |
| Height | 2.0 m2.4 m |
| Width | 3 m maximum. |
| Fixing | Bolt downIn groundWall |
| Gates | - |
| Pedestrian | Not requiredRequiredSingle leaf, 1.2 m wide, or width to suit, consult manufacturer and insert requirements. |
| Vehicular | Not requiredRequiredDouble leaf, 3.0 m wide, or width to suit, consult manufacturer and insert requirements. |
| Projection | MinimalStandard |
| Standard product features | Finish: Galvanized and polyester powder coated. Mesh: Duo8 SR1 mesh comprising 50 x 200 mm mesh with single 6 mm wires, vertical wires are at 50 mm centres, dual 8 mm horizontal wires at 200 mm centres. Posts: 60 x 40 mm or 80 mm x 40 mm rectangular hollow section (RHS) spaced at a maximum of 3025 mm centres. Post to panel fixing: Panels fixed to posts with full height 40 x 5 mm clamp bar with stainless steel fixings at 400 mm centres. The full height clamp bars create a flush safe finish with the mesh ends behind the clamp bar, with an enhanced over clip on the upper most and lower most fixings. Gates: Framed in a 50 x 50 mm RHS with Zaun Duo8 mesh welded inside the frame, with slide latch. Gate supplied with rubber bump stop and two suitable gate posts. Vehicular access also supplied with drop bolts. |
| Product Options | Security rating: SR1: Opportunist attack by bodily force using minimal tools (screwdriver, knife, pliers, etc.). |