Nicholson STS Ltd
Manufacturer and supplier of specialist, innovative roof products and systems.
Default
Showing 1-36 of 62
AIRTRAK® AB1 Abutment Ventilator - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Abutment ventilator for fully supported metal, membrane and liquid applied roofing.
AIRTRAK® AB2 Abutment Ventilator - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Abutment ventilator for built-up bitumen roofing.
AIRTRAK® AB3 Abutment Ventilator - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Abutment ventilator for mastic asphalt (vertical kerb).
AIRTRAK® AB4 Abutment Ventilator - Stainless steel linear ventilator
Verified 17 days ago
Nicholson STS Ltd
Abutment ventilator for mastic asphalt (splayed kerb).
AIRTRAK® AB5 Abutment Ventilator - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Abutment ventilator for hard metal roofing.
AIRTRAK® AB6 Abutment Ventilator - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Ventilator for use at a parapet wall abutment.
AIRTRAK® Airboard - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Ventilated roof decking for fully supported metal roofing.
AIRTRAK® BRV Between Roll Ventilators - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Range of between-roll ventilators for lead ridge details.
AIRTRAK® CL Cladding Ventilator - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Provides ventilation into metal cladding from 60° pitch to vertical.
AIRTRAK® CP Change of Pitch Ventilator - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Provides ventilation at the change of pitch in a slated or tiled mansard roof.
AIRTRAK® CS Comb Strip - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Comb strip designed to prevent the entry of birds and vermin into the batten void beneath profiled tiles at the eaves.
AIRTRAK® CV Cheek Ventilator - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Provides ventilation into vertical lead cladding.
AIRTRAK® EA Eaves Ventilators - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
A range of profiles that provide a 25 mm ventilation path into the roof void at the eaves or edge of a flat roof.
AIRTRAK® EC Eaves Carrier - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Support profile to prevent ponding at eaves caused by a backfall in the roof underlay membrane.
AIRTRAK® F10/ F25 Fascia Ventilators - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Provides ventilation to the roof void over the eaves fascia board.
AIRTRAK® IL Inline Ventilators - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Inline ventilators for use at the foot or head of vertical or pitched cladding to provide a continuous airgap for ventilation.
AIRTRAK® IM Insect Mesh - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Insect mesh for use in any roof ventilation apertures.
AIRTRAK® LB Layboard Ventilators - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Range of ventilators providing 25 mm ventilation over the layboard into the roof void.
AIRTRAK® LV Lead Roof Ventilators - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Range of compact point ventilators for flat or pitched lead covered roofs up to 30°.
AIRTRAK® MV Mansard Ventilators - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Range of mansard ventilators for slate and tile roofing is used to introduce ventilation into a flat roof where it falls out onto a pitched roof.
AIRTRAK® PE Pitched Eaves Ventilators - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Provides an unobtrusive ventilation path into the roof void at the bottom of a pitched roof slope.
AIRTRAK® PRV Pitched Roof Ventilator - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Provides point ventilation to lead roofs and vertical cladding where appropriate.
AIRTRAK® PV Pitched Valley Ventilators - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Provides continuous ventilation detail to a pitched valley between two roof pitches.
AIRTRAK® RTV Ridge Tile Ventilator - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Provides ventilation of most ridge tiles using traditional wet laid methods.
AIRTRAK® RV Roll Vent - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Roll ventilator designed to ensure that the airpath at the eaves is unobstructed by the insulation where it sits above the wall plate.
AIRTRAK® SLV Slate Ventilator - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Low profile roof ventilator.
AIRTRAK® VA Ventilated Apron - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Introduces ventilation at the head of slated or tiled pitch where the roof meets an abutment wall.
AIRTRAK® VR Ventilated Ridge - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Introduces ventilation at the head of slated or tiled pitch where it reaches the ridge.
AIRTRAK® VT Ventilated Edge Trim - Roof Ventilation System
Verified 17 days ago
Nicholson STS Ltd
Provides a continuous ventilation detail to the bottom edge of a plywood fascia or cladding.
ROOFBOX® K Bespoke - Roof Upstand Kerb
Verified 17 days ago
Nicholson STS Ltd
Internally insulated kerb upstand to suit bespoke roof opening, compatible with bespoke ROOFBOX® M roof cabinets.
ROOFBOX® K1 - Roof Upstands Kerb
Verified 17 days ago
Nicholson STS Ltd
Internally insulated kerb upstand to suit roof opening 1000 x 1000 mm, compatible with ROOFBOX® M1 modular roof cabinets.
ROOFBOX® K2 - Roof Upstand Kerb
Verified 17 days ago
Nicholson STS Ltd
Insulated kerb upstand to suit roof opening 1000 x 1500 mm, compatible with ROOFBOX® M2 modular roof cabinets.
ROOFBOX® K3 - Roof Upstand Kerb
Verified 17 days ago
Nicholson STS Ltd
Internally insulated kerb upstand to suit roof opening 1000 x 2000 mm, compatible with ROOFBOX® M3 modular roof cabinets.
ROOFBOX® K4 - Roof Upstand Kerb
Verified 17 days ago
Nicholson STS Ltd
Insulated kerb upstand to suit roof opening 1500 x 1500 mm, compatible with ROOFBOX® M4 modular roof cabinets.
ROOFBOX® K5 - Roof Upstand Kerb
Verified 17 days ago
Nicholson STS Ltd
Internally insulated kerb upstand to suit roof opening 1500 x 3000 mm, compatible with ROOFBOX® M5 modular roof cabinets.
ROOFBOX® K6 - Roof Upstand Kerb
Verified 17 days ago
Nicholson STS Ltd
Insulated kerb upstand to suit roof opening 1500 x 4500 mm, compatible with ROOFBOX® M6 modular roof cabinets.
Showing 1-36 of 62