Fixed roof ventilators, terminals and accessories
Find and specify fixed roof ventilators, terminals and accessories from top manufacturers with NBS Source. Browse 107 products that are ready to use on your projects. Classification Pr_30_59_29.
Can't find what you're looking for?
Recently verified
Showing 1-36 of 107
VentraTech Bat Access Slate
Verified 6 days ago
Burton Roofing Merchants Ltd
The VentraTech Bat Access Slate provides a discreet and un-interrupted path from the roof exterior to the batten cavity/ interior of the roof.
VentraTech Hybrid Slate Vent
Verified 6 days ago
Burton Roofing Merchants Ltd
Hybrid slate vent replacing one tile and allowing for ventilation direct into the roof space.
AIRTRAK® VT Ventilated Edge Trim - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides a continuous ventilation detail to the bottom edge of a plywood fascia or cladding.
AIRTRAK® AB2 Abutment Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Abutment ventilator for built-up bitumen roofing.
AIRTRAK® RV Roll Vent - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Roll ventilator designed to ensure that the airpath at the eaves is unobstructed by the insulation where it sits above the wall plate.
AIRTRAK® CV Cheek Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides ventilation into vertical lead cladding.
AIRTRAK® PV Pitched Valley Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides continuous ventilation detail to a pitched valley between two roof pitches.
AIRTRAK® RTV Ridge Tile Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides ventilation of most ridge tiles using traditional wet laid methods.
AIRTRAK® PRV Pitched Roof Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides point ventilation to lead roofs and vertical cladding where appropriate.
AIRTRAK® EA Eaves Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
A range of profiles that provide a 25 mm ventilation path into the roof void at the eaves or edge of a flat roof.
AIRTRAK® PE Pitched Eaves Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides an unobtrusive ventilation path into the roof void at the bottom of a pitched roof slope.
AIRTRAK® AB3 Abutment Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Abutment ventilator for mastic asphalt (vertical kerb).
AIRTRAK® EC Eaves Carrier - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Support profile to prevent ponding at eaves caused by a backfall in the roof underlay membrane.
AIRTRAK® IL Inline Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Inline ventilators for use at the foot or head of vertical or pitched cladding to provide a continuous airgap for ventilation.
AIRTRAK® CP Change of Pitch Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides ventilation at the change of pitch in a slated or tiled mansard roof.
AIRTRAK® MV Mansard Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Range of mansard ventilators for slate and tile roofing is used to introduce ventilation into a flat roof where it falls out onto a pitched roof.
AIRTRAK® VA Ventilated Apron - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Introduces ventilation at the head of slated or tiled pitch where the roof meets an abutment wall.
AIRTRAK® AB6 Abutment Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Ventilator for use at a parapet wall abutment.
ROOFPORT® RPV - Roof Void Point Ventilators
Verified 13 days ago
Nicholson STS Ltd
Roof void point ventilators with an integral fly screen mesh, and a ventilation area of 15 000 or 30 000 mm².
AIRTRAK® LB Layboard Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Range of ventilators providing 25 mm ventilation over the layboard into the roof void.
AIRTRAK® CL Cladding Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides ventilation into metal cladding from 60° pitch to vertical.
AIRTRAK® AB4 Abutment Ventilator - Stainless steel linear ventilator
Verified 13 days ago
Nicholson STS Ltd
Abutment ventilator for mastic asphalt (splayed kerb).
AIRTRAK® F10/ F25 Fascia Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides ventilation to the roof void over the eaves fascia board.
AIRTRAK® VR Ventilated Ridge - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Introduces ventilation at the head of slated or tiled pitch where it reaches the ridge.
AIRTRAK® AB5 Abutment Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Abutment ventilator for hard metal roofing.
AIRTRAK® AB1 Abutment Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Abutment ventilator for fully supported metal, membrane and liquid applied roofing.
AIRTRAK® LV Lead Roof Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Range of compact point ventilators for flat or pitched lead covered roofs up to 30°.
AIRTRAK® BRV Between Roll Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Range of between-roll ventilators for lead ridge details.
AIRTRAK® CS Comb Strip - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Comb strip designed to prevent the entry of birds and vermin into the batten void beneath profiled tiles at the eaves.
Bird Comb Filler
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
Eaves comb filler to prevent against bird and vermin infestation.
Felt Support Tray - Eaves Level Ventilation
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
High-quality PVC eaves trays that protect the roofing felt from intense weather and temperature conditions.
Continuous Rafter Tray - Eaves Level Ventilation
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
Rafter roll-out tray used to maintain ventilation paths at the eaves and provide a barrier between the underlay and the roof felt.
2 in 1 Felt Support Tray - Eaves Level Ventilation
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
High-quality, 1 metre eaves support trays with an integrated 10mm over fascia vent.
3 in 1 Felt Support Tray
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
A PVC felt support tray that incorporates an over fascia ventilator and bird comb filler.
RyMar® IM Vent Pipe Cover
Verified 1 month ago
Fixfast Ltd
Vent pipe cover - insertion model.
Universal Roll Panel Vent - Eaves Ventilator
Verified 2 months ago
Hambleside Danelaw Ltd
Eaves panel vent to help maintain a consistent flow of air into the roof space.
Showing 1-36 of 107