Batt and quilt products

Non-combustible rock mineral wool slabs.

A non-combustible rock mineral wool slab bonded to a weather-resistant facing board.

High performance, non-combustible glass mineral wool rolls.

Non-combustible glass mineral wool slabs.

A low to medium density, non-combustible glass mineral wool roll.

Lightweight, flexible, non-combustible, glass mineral wool rolls.

Non-combustible, medium density, glass mineral wool slabs.

Non-combustible glass mineral wool rolls.

High quality polyethylene foam certified to BS EN ISO 717/2 which achieves 19 dB at 3 mm thickness and 22 dB at 5 mm (ratings may vary dependent on the adhesive applied).

Non-combustible insulation solution for upstands and parapet walls.

Solutions for fire, thermal and acoustic roofing systems for all building types.

Thermal insulation suitable for use in timber frame walls.

Thermal insulation suitable for use in loft applications (joist level), suspended timber ground floors and flat roofs (between the joists).

The ROCKWOOL Ablative Coated Batt is a mineral wool insulation product, pre- coated on both sides with a high performance ablative coating. It has been comprehensively tested as part of the ROCKWOOL FirePro range of fire protection products and can be installed across a variety of services and substrates including solid walls and floors, flexible walls, multi-service penetrations, the head of wall, blank seals and face fixed applications as well as large framed service voids. As fire resistant insulation, it is fire stopping offering up to 4 hours fire performance whilst also providing an excellent acoustic performance and importantly, preventing air leakage to maintain the building’s heat. FirePro Ablative Coated Batts are not intended for use as load-bearing seals. Performance:Tested to EN 1366-3 for up to 4 hours fire resistance integrity and insulation in masonry and plasterboard walls or concrete floors, the Ablative Coated Batt system can provide a seal around a range of plastic, copper and steel (1) pipes, cables and ductwork. It can also form a blank seal, for areas up to 2.88 m x 2.4 m.When insulating or sealing around austenitic stainless steel, it is recommended that the pipe is wrapped locally with aluminium foil, regardless of insulation type - contact Rockwool for further details.Features and benefits:Tested to provide up to 4 hours fire resistance.Excellent fire resistance from a single thickness batt.Extensive suite of tested solutions.Suitable for sealing wall and floor voids containing most commonly used services and substrates.Can be used as a blank seal and a head of wall seal.CE marked to ETAG 26-02.Acoustic performance Tested for head of wall: Rw: up to 48db (two coated batts) Rw: up to 37db (single coated batt) The correct use of Coated batt within concealed cavities and voids will reduce the level of transmitted sound: Rw: up to 52 db (two coated batts) - incorporating 48 mm O/D PVC /15 mm copper pipe penetrations.Rw: up to 34 db (single coated batt) - incorporating 48 mm O/D PVC /15 mm copper pipe penetrations. Application:The ROCKWOOL Ablative Coated Batt provides an innovative air seal barrier to keep fire out, but sound and heat in. FirePro Ablative Coated Batts are not intended for use as load-bearing seals. Where a load bearing seal is required, ROCKWOOL Firestop Compound should be considered

Ablative coated mineral wool fire batt used to reinstate the fire rating of wall and floor constructions where they have been penetrated by services.

Acoustic insulation suitable for partitions, walls and floors.

Acoustic insulation suitable for use in partitions, floors and ceilings.

Thermal insulation suitable for use in loft applications (joist level), suspended timber ground floors and flat roofs (between the joists).

Thermal and acoustic insulation suitable for use in pitched roof rafter applications.

ROCKWOOL® FLEXI® is a unique, flexi-edged insulation product, specifically developed using patented technology for a fast and easy, perfect friction fit between timber and metal frame systems.

Resilient layer membrane.

ROCKWOOL® CLADDING ROLL has been specifically developed for use in lightweight cladding applications to commercial or industrial framed buildings.

A range of high performance, stone wool insulation boards for warm flat roofs.

Thermal insulation suitable for use in timber frame walls.

Thermal insulation suitable for use in lightweight steel frame external walls.

Insulation roll.

Thermal insulation suitable for use in external masonry cavity walls.

Thermal insulation suitable for use in timber frame walls.

Thermal insulation suitable for use in timber frame walls.

Thermal insulation suitable for use in timber frame walls.

Thermal insulation suitable for use in loft applications (joist level), suspended timber ground floors and flat roofs (between the joists).

Robust, long-lasting protection for masonry cavity walls.

Non-combustible thermal insulation designed specifically for steel frames.

Foil faced ROCKWOOL® slab for fire stopping voids up to 1 m high.

Thermal insulation suitable for use in external masonry cavity walls.

Sound insulation slab which absorbs sound waves and reduces vibration.