NBS Source
List your products

monitor

295 results found

Sort by:

Showing 1-36 of 273

Switch Monitor

Apollo Fire Detectors Ltd

The Switch Monitor is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue control equipment.

  • Four input states - 'normal', 'fault', 'pre-alarm' and 'alarm'
  • Two visible LEDs
  • Loop-Powered

Zone Monitor

Apollo Fire Detectors Ltd

The Zone Monitor powers and controls the operation of a zone of up to 20 Apollo Series 65 or Orbis fire detectors from a Discovery or XP95 loop.

Switch Monitor Plus

Apollo Fire Detectors Ltd

The Switch Monitor Plus is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue control equipment.

  • Output for resetting a remote detector
  • Four input states - 'normal', 'fault', 'pre-alarm', and 'alarm'
  • Two visible LEDs
  • Selectable alarm delay for monitoring flow switches

Mini Switch Monitor

Apollo Fire Detectors Ltd

The Mini Switch Monitor is an interface within an entirely new housing. This allows the unit to be fitted onto a standard 35mm DIN-Rail (using a twist-click motion) or mounted within an enclosure, for example a manual call point.

It is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue addressable control equipment.

Multi-application panel PCM ACS30 Panel

nVent Thermal Management

Cold Water or LPHW Services - Multi-Circuit, Distributed Digital Control System, Single or Multi-Application: For Multiple trace heating applications. The circuits shall be controlled and monitored using a centralised control system with distributed power and control modules, complete with colour LCD touch screen, password protected user interface terminal (UIT) for central programming; power connection modules (PCM) to provide distributed power, circuit protection, control & monitoring; remote monitoring modules (RMM) for additional temperature measurement; integrated energy saving proportional ambient sensing programmable controller (PASC); BMS interface using ProtoNode high performance multi-protocol gateway, to allow translation from native ModBus to BacNet protocols; pre-programmed parameters, to deliver concurrent control for heating cables used for pipe freeze protection, hot water temperature maintenance, flow maintenance, surface snow melting, roof/gutter de-icing and floor heating applications. 20 Amp or 32 AMP switching capacity per a circuit The PCM also provides: Ground Fault Monitoring, Line Current Monitoring, Alarm Capability and RTD (Resistance Temperature Detector) input capability for each individual module heating circuit.

SBS Control Panels for Frost Protection and Hot Water Maintenance

nVent Thermal Management

Multi-Circuit, Single Application Controller, Panel Mounted. All hot water temperature maintenance circuits or Frost Protection Circuits shall be controlled and monitored using an energy saving, programmable, electrically protected, multi-circuit control panel system complete with integrated energy saving programmable controller (to provide adjustable maintained temperatures in the range 50-65°C, water heater sensor and integrated 7 day power off timer), phased switch on capability, integrated time-shift duty cycle control, integrated power load management and volt free alarm contact to indicate RCD/ MCB failure, loss of power and controller or sensor error. The SBS control panel has steel plate and full assembled to allow a turnkey condition wired and inspected cable guides in the base of the housingThe system shall be SBS-xx-HV-EC0-10 (Hot Water Maintenance) or SBS-xx-SV (Frost Protection). Please note the SBS panel will either contain HWAT-ECO temperature control for Hot Water Maintenance or Raystat Control for frost protection.

Multi-application panel UIT ACS30 Panel

nVent Thermal Management

Cold Water or LPHW Services - Multi-Circuit, Distributed Digital Control System, Single or Multi-Application For multiple trace heating applications. The pipe freeze protection circuits shall be controlled and monitored using a centralised control system with distributed power and control modules, complete with colour LCD touch screen, password protected user interface terminal (UIT) for central programming; power connection modules (PCM) to provide distributed power, circuit protection, control & monitoring; remote monitoring modules (RMM) for additional temperature measurement; integrated energy saving proportional ambient sensing programmable controller (PASC); BMS interface using ProtoNode high performance multi-protocol gateway, to allow translation from native ModBus to BacNet protocols; pre-programmed parameters, to deliver concurrent control for heating cables used for pipe freeze protection, hot water temperature maintenance, flow maintenance, surface snow melting, roof/gutter de-icing and floor heating applications.

One UIT shall be included in the system, along with at least 1 PCM (to maximum 52), each PCM shall control up to 5 circuits. The UIT shall accept up to 16 RMM, each having up to 8 temperature inputs. This enables the control of up to 260 heating circuits and is controlled by either RS485 , RS232 or 10/100 Base-T Ethernet communication ports to allow communication with external distributed control systems or BMS Systems. The ACS30 is designed for indoor use in non-hazardous location installations.

Frost Protection Raystat Eco-10 Controller

nVent Thermal Management

Cold Water Services - Single Circuit, Single Application Controller: Cold water pipe freeze protection circuits are controlled using a programmable, energy-efficient proportional ambient sensing control (PASC) thermostat, complete with low temperature alarm function, digital display, ‘offsite programming’ without external power supply, 25A switching capacity, sensor and voltage failure alarms, selectable fail safe mode (either ON or OFF), alarm relay for remote BMS monitoring (0-10v VFC)and system error codes for quick diagnostic of system failure.

The size of the Raystat ECO-10 120mm x 160mm x 90mm and is manufactured from Grey Polycarbonate which has an ingress protection of IP65, the weight is 800g. The controller can be mounted on a wall or on a support bracket. The controller uses a temperature sensor which is a 3-wire pt100 according to IEC class B with a sensor head of 6mm Diameter. (The sensor cable can be extended by up to 150mm if required).

Hot Water Maintenance Controller HWAT ECO v5

nVent Thermal Management

Intelligent electronic temperature control unit with integrated time clock, HWAT-ECO unit saves power, it can lower temperature or switch off during water consumption peaks.

The HWAT ECO Controller controls all hot water temperature maintenance circuits and shall be controlled using a programmable, energy saving, single circuit local controller to provide adjustable maintained temperatures in the range 50-65°C, water heater sensor and alarm, integrated power off timer function with 7 day programmable capability and 0-10V DC input to allow BMS temperature change.

The HWAT ECO has a touch sensitive screen with easy to use menus to allow the correct macro to be used on the building, The HWAT ECO controller has the capability of being programmed off line with a USB for larger projects this enables the HWAT ECOs to be pre-programmed prior to set up on site which is a significant time saving.

Net2 Entry Monitor

Net2

Net2 Entry is a door entry system that works standalone or alongside Paxton's Net2 access control, combining door entry with key features of Net2.

Net2 Entry consists of 3 components that auto-detect on set up; external panel, interior monitor and door control unit.

Net2 Entry is a plug and play solution and is suitable for a wide variety of sites.

The Net2 Entry monitor comes in a smart and simple design to suit a range of interiors, and can be wall or desk mounted.

Entry - Premium monitor

Net2

The Premium monitor comes with a 7″ capacitive colour touchscreen, free concierge management functionality and several personalisation options available. The monitor can be wall or desk mounted. When used with the Entry Touch panel the premium monitor supports two-way video calling and video voicemails. Personalised experience with built in themes. Free concierge management. Enhanced call administration. Quality capacitive glass touch screen. Two-way video with touch panel. Also available with a handset.

Entry - Standard monitor

Net2

The new Entry Standard monitor comes with a 4.3” capacitive touch screen, and the same user interface as the Entry Premium monitor. The sleek, timeless design enables the monitor to fit discreetly into any surroundings. The monitor can be wall or desk mounted and is available with or without a handset. NEW next generation standard monitor. Works with Paxton10, Net2 & standalone. Clear user interface on a 4.3” capacitive touch screen. Available with or without a handset. IP and PoE technology for easy expansion. Can be wall mounted or used with a desk stand (sold separately).

Entry - Premium monitor

Paxton10

The Premium monitor comes with a 7″ capacitive colour touchscreen, free concierge management functionality and several personalisation options available. The monitor can be wall or desk mounted. When used with the Entry Touch panel the premium monitor supports two-way video calling and video voicemails. Personalised experience with built in themes. Free concierge management. Enhanced call administration. Quality capacitive glass touch screen. Two-way video with touch panel. Also available with a handset.

Entry - Audio monitor

Net2

The Entry audio monitor provides a cost-effective option within the Entry range, fully supporting all Entry functionality where video is not required. The monitor can be wall or desk mounted, and can be used via handset for private calls or in hands free mode. Cost-effective audio only monitor. Sleek, contemporary design. Action buttons configurable for a range of requirements. Optional connection to a sounder or beacon. No need for specialist wiring diagrams. IP and PoE technology for easy expansion.

Entry - Audio monitor

Paxton10

The Entry audio monitor provides a cost-effective option within the Entry range, fully supporting all Entry functionality where video is not required. The monitor can be wall or desk mounted, and can be used via handset for private calls or in hands free mode. Cost-effective audio only monitor. Sleek, contemporary design. Action buttons configurable for a range of requirements. Optional connection to a sounder or beacon. No need for specialist wiring diagrams. IP and PoE technology for easy expansion.

Entry - Standard monitor

Paxton10

The new Entry Standard monitor comes with a 4.3” capacitive touch screen, and the same user interface as the Entry Premium monitor. The sleek, timeless design enables the monitor to fit discreetly into any surroundings. The monitor can be wall or desk mounted and is available with or without a handset. NEW next generation standard monitor. Works with Paxton10, Net2 & standalone. Clear user interface on a 4.3” capacitive touch screen. Available with or without a handset. IP and PoE technology for easy expansion. Can be wall mounted or used with a desk stand (sold separately).

Monitoring End-of-Line (BEL1IP)

Baldwin Boxall Communications Ltd

Up to four BEL1IP units can be placed on one speaker run. The unit continually monitors the critical path signal of speaker lines for open, short circuit and earth faults. Any detected loudspeaker line faults are displayed on the voice alarm rack.

Monitoring End-of-Line (BEL1)

Baldwin Boxall Communications Ltd

Up to four BEL1 units can be placed on one speaker run. The unit continually monitors the critical path signal of speaker lines for open, short circuit and earth faults. Any detected loudspeaker line faults are displayed on the voice alarm rack.

Showing 1-36 of 273

Feedback