NBS Source
I'm a manufacturer

"flooring"

6,741 results found

Sort by:

Showing 1-36 of 2401

Sponsored
School Flooring, Raised Floor - Skövde, SE

School Flooring, Raised Floor - Skövde, SE

Floor Levelling Systems Ltd

SubFloor flooring was used to help renovate and raise a concrete floor into a level school floor in Skövde, Sweden.This simple and elegant solution raised and levelled the floor to allow for installations and insulation. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height.45 mm Rigid insulation was positioned on the insulation bearers to leave a clear void underneath and a 22 mm chipboard was placed on top.Products:Wooden Joist 45x45x3600 mmSubFloor Screw 100 mmSubFloor Screw FootInsulation Bearer 45 mmHeight Variation: 50 - 111 mmJoist separation: c/c 600 mmSystem Weight - c/c 600 mm: 2.66 kg/m²Materials:Pine T0-C24Fibre-reinforced polypropylenePolyamideCold Galvanised Sheet SteelPoint Load Limit (50 x 50 mm):Load next to screw over joist edge - 9.72 kNLoad between screws over joist edge - 15.85 kN
Sponsored
Tour Alto, La Défense, Paris - Knauf DB Green Raised Floor System

Tour Alto, La Défense, Paris - Knauf DB Green Raised Floor System

Access Floors Distribution

The German company Knauf Integral was able to prevail against competitors with its GIFAfloor DB green raised floor system. A maximum flexible and individual floor due to the interchangeability of the individual panels, a non-combustible building material with A1 classification and the unproblematic recycling due to the lack of plastic edging, as is used in conventional raised floor elements, were decisive for the selection.Flexibility, health in the workplace and sustainability in construction - the 'Tour Alto' in Paris La DéfenseIn the Paris suburb of Courbevoie, in the office district of La Défense, the foundation stone was laid for the 'Tour Alto' - a 160 m high skyscraper which, after its planned completion in 2020, will have a usable area of 51,200 m2 next to countless offices, numerous restaurants, bars and fitness studios etc. will accommodate. For the floor structure, the property developer decided on the double floor 'GIFAfloor DB green' from Knauf Integral, paying particular attention to the aspects of flexibility, health, environmental protection and sustainability in buildings.The 'Tour Alto' office tower in the west of Paris extends over 38 floors and is part of the high-rise backdrop of the La Défense office district. Nevertheless, Bouygues, one of the largest property developers in the world, is setting new standards in construction: installed products not only have to be as flexible as possible in their design and use, they also have to meet high standards of sustainability and environmental compatibility as well as the highest health standards for people, who will do their jobs there every day.A maximum flexible and individual floor due to the interchangeability of the individual panels, a non-flammable building material with A1 classification and the unproblematic recycling due to the lack of plastic edging, as is used in conventional raised floor elements, were decisive for the selection.In addition, health and environmentally friendly aspects were the absolute focus of the project for the property developer: The selected product must contribute to excellent indoor air quality and all materials that come into contact with the indoor air should have A + according to French in terms of VOC and formaldehyde emissions Emission class to be rated. GIFAfloor DB green elements have exactly this A + certification - the decisive advantage compared to the commonly used raised floors with chipboard supports that contain formaldehyde. Independent (building) biological analysis laboratories also prove the excellent quality through their tests: Eurofins certifies the product as suitable for indoor use, and the Institute for Building Biology in Rosenheim gives the verdict " recommended ''. This ensures a healthy working environment for employees.With GIFAfloor DB green, Knauf Integral offers a sustainable and health-friendly double floor solution for flexible, high-quality commercial interior design. The elements consist of the homogeneous gypsum fiber material GIFAtec and are available in different thicknesses depending on the requirements.
Sponsored
Terrazzo Raised Floor System – Cottam House, Kings Cross, London

Terrazzo Raised Floor System – Cottam House, Kings Cross, London

Access Floors Distribution

Timescales: March 2021 -- Project Size: 800 m2Products: MonoTile - Finished in “Bianco Botticino”The Mills Fabrica, Cottam House, Kings Cross, LondonThe Mills Fabrica is a contemporary co-working space that has been thoughtfully designed to foster collaboration and community among sustainable conscious businesses. A key component of any modern office space is the flooring system, which can have a significant impact on both the aesthetics and functionality of the environment.In order to ensure that the flooring system for The Mills Fabrica was both visually appealing and practical, AFD collaborated closely with our contracting partners. We were able to provide the expertise needed to specify the correct finish design that would be appropriate for the space, taking into account factors such as traffic flow, durability, and maintenance requirements.The chosen flooring system was a Terrazzo raised access system, which was installed alongside matching floor tiles in other areas, as well as wall tiles. The Terrazzo Raised Floor system material is renowned for its durability, low maintenance requirements, and stunning visual appeal.The raised access system offers several advantages over traditional flooring systems. It allows for easy access to the void beneath the flooring, which is particularly useful for buildings that require extensive cabling or piping. It also provides greater flexibility for future modifications to the space, such as the installation of new electrical or data systems.By choosing a Terrazzo raised access system for The Mills Fabrica, we were able to achieve a high-end design finish that seamlessly flows from one area to the next, while still providing the practicality and functionality that is essential for a modern office space. The result is a flooring system that is not only aesthetically pleasing, but also enhances the overall functionality of the environment.
Sponsored
Access Flooring for Cheltenham Offices

Access Flooring for Cheltenham Offices

Bathgate Flooring Ltd

Access flooring once again was selected for this major £12 million building in Cheltenham. Bathgate Flooring manufactured and installed over 5600m2 of Panels to ensure that this Grade A office space offered the maximum flexibility. Products Used BGM 600 Steel Encapsulated Panels Constructing this Office Development is well recorded with a time lapse video of the entire project available through the Gloucestershire Live news story. Access Flooring is used in buildings like this to ensure that there is easy access to the services if needed. Simply lift up the floor panels and all the cabling is visible beneath.
Sponsored
Shire Oak Sports Floor Case Study

Shire Oak Sports Floor Case Study

DYNAMIK Sports Flooring

For this refurbishment project, we installed a new DYNAMIK Sprung Engineered Premium Sport Oak Floor. includes the DYNAMIK bespoke court design by partners Sportserve, who created a basketball home team feel by highlighting the surrounds and court Ds as well as the DYNAMIK and Shire Oak Academy logos. Neal Critchley at Shire Oak Academy, had a few words to say the project: "It was a real pleasure working with DYNAMIK for the replacement of our gymnasium floor, from the early discussions, through design, installation to completion the DYNAMIK team were integral to how the project evolved and ultimately looks. We are delighted with the finished product and how it fits into the branding of our sports facilities." "Having considered a range of options for the replacement of our old gymnasium floor it was clear that the passion Craig and the DYNAMIK team had to help us meet our goals, which made them the perfect partner for us. The new wooden floor looks amazing!” The school also purchased DYNAMIK Giant Carpet Tile protection to preserve the Oak during non-sporting or community events “…The protective tiles are a perfect way for us to ensure it stays that way for as long as possible. Thanks to the DYNAMIK team for all your help and all the extra time you have given to help ensure the project’s success!"
Sponsored
55 Whitehall, London - Knauf Hugo18 - Overlay to existing Raised Access Floor

55 Whitehall, London - Knauf Hugo18 - Overlay to existing Raised Access Floor

Access Floors Distribution

55 Whitehall was previously a Government occupied office space. This iconic building has undergone a complete re-design. There was existing steel encapsulated raised access flooring throughout. Rather than remove or replace the raised floor, it was retained. Hugo18 was specified here to use as an overlay solution to the raised access floor. It offers a non-combustible, high performance substrate for a range of finishes, in this case - ceramics
Sponsored
Overlay to Raised Access Floor - Knauf GifaFloor FHB18

Overlay to Raised Access Floor - Knauf GifaFloor FHB18

Access Floors Distribution

60 London Wall is an icon mixed use office & retail building in the dynamic heart of London’s City, with 328,500 sq ft of grade A office accommodation situated over ten stunning floors. It was recently completely renovated and Alliance Bernstein now occupy space within the building. The existing raised access floor was overlaid with Knauf GifaFloor FHB18 making it the ideal substrate to receive a combination of ceramic tiles & micro-screed cement
Sponsored
Bespoke Oak Versailles Parquet Flooring

Bespoke Oak Versailles Parquet Flooring

The Solid Wood Flooring Company

For the beautiful penthouse atop one of the buildings in South Bank Place, located next to the London Eye, the designers wanted a feature floor with a bespoke colour finish. We worked with the designers at Goddard Littlefair and decided on the timeless design of the Versailles parquet pattern. The designers wanted a show-stopping colour for this floor. We created the Belvedere colour finish; using a mixture of fumed, European Oak and pigmented hard wax oils to create a dark colour tone with red and golden highlights.To ensure a uniform and quick installation on site; we creating metre square panels with the Solid Oak Versailles pattern positioned by hand onto Birch plywood backing. Having discussed the fit-out process in detail with the fit-out team from SJ Eastern Joinery, we grooved all four sides of the panel and supplied the tongues loose. This gave the fitters flexibility to lay the boards as they saw fit on site. Once we had assembled the panels, the bespoke colour finish was applied; after completing multiple coats the panels were stored to fully cure and harden.Once the team from SJ Eastern had fitted the flooring on site, they protected it with a soft breathable cover and topped that with hardboard and taped the edges. This allowed the other trades to snag without damaging the floor. Once snagging was complete, the floor protection was removed. As anyone who has been on a building site knows, dust and debris are everywhere and sure enough the flooring needed a final clean and buff with oil to increase the lustre and make it perfect for the wow factor needed in such a stunning project.The expert team lead by Bardhyl Miskiqi of BRB Flooring came in and cleaned the floor thoroughly, removing plaster dust and other debris by vacuum and cleaning the floor down using a solution of Blanchon Natural Soap and hot water. Once the floor was suitably clean, they applied Blanchon Hard Wax Oil Satin on to the floor and buffed a coat into the floor using a buffing machine equipped with a white buffing pad. This fed the Oak another coat of oil which bolsters the protection against every day use and increased the lustre of the wood highlighting all the colours from that bespoke colour that had been applied at the factory.Once the oil was properly buffed in, the penthouse door was closed and the floor left to dry and cure. Once curing had completed the furniture was placed in the room and made ready for viewing by the client and new owner and a lifetime of happy memories.Please call 01666 504015 for more information.
Sponsored
Bespoke Oak Versailles Parquet Flooring - Belvedere Penthouse

Bespoke Oak Versailles Parquet Flooring - Belvedere Penthouse

The Solid Wood Flooring Company

For the beautiful penthouse atop one of the buildings in South Bank Place, located next to the London Eye, the designers wanted a feature floor with a bespoke colour finish. We worked with the designers at Goddard Littlefair and decided on the timeless design of the Versailles parquet pattern. The designers wanted a show-stopping colour for this floor. We created the Belvedere colour finish; using a mixture of fumed, European Oak and pigmented hard wax oils to create a dark colour tone with red and golden highlights.To ensure a uniform and quick installation on site; we creating metre square panels with the Solid Oak Versailles pattern positioned by hand onto Birch plywood backing. Having discussed the fit-out process in detail with the fit-out team from SJ Eastern Joinery, we grooved all four sides of the panel and supplied the tongues loose. This gave the fitters flexibility to lay the boards as they saw fit on site. Once we had assembled the panels, the bespoke colour finish was applied; after completing multiple coats the panels were stored to fully cure and harden.Once the team from SJ Eastern had fitted the flooring on site, they protected it with a soft breathable cover and topped that with hardboard and taped the edges. This allowed the other trades to snag without damaging the floor. Once snagging was complete, the floor protection was removed. As anyone who has been on a building site knows, dust and debris are everywhere and sure enough the flooring needed a final clean and buff with oil to increase the lustre and make it perfect for the wow factor needed in such a stunning project.The expert team lead by Bardhyl Miskiqi of BRB Flooring came in and cleaned the floor thoroughly, removing plaster dust and other debris by vacuum and cleaning the floor down using a solution of Blanchon Natural Soap and hot water. Once the floor was suitably clean, they applied Blanchon Hard Wax Oil Satin on to the floor and buffed a coat into the floor using a buffing machine equipped with a white buffing pad. This fed the Oak another coat of oil which bolsters the protection against every day use and increased the lustre of the wood highlighting all the colours from that bespoke colour that had been applied at the factory.Once the oil was properly buffed in, the penthouse door was closed and the floor left to dry and cure. Once curing had completed the furniture was placed in the room and made ready for viewing by the client and new owner and a lifetime of happy memories.Please call 01666 504015 for more information or click the product image details below.
Sponsored
Ventilated Nursery, Raised Steel Floor - Gothenburg, SE

Ventilated Nursery, Raised Steel Floor - Gothenburg, SE

Floor Levelling Systems Ltd

SubFloor flooring was used to help renovate, raise and ventilate a 700 m² floor into a Nursery near Gothenburg, Sweden.The Subfloor ventilation system was ideal for this nursery, as it allowed for multiple floor height adjustments and for ventilation installations under the floor. Associated floor ventilation material such as ducts, air distribution strips, fans, etc. was also provided. The negative pressure the ventilation generates under the floor creates a fresh and healthy indoor environment.This simple and elegant solution raised and levelled the floor to allow for installations and insulation. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height.Products:Steel Joist 45x30x3800 mmSubFloor Screw 100 mmInsulation Bearer 45 mmHeight Variation: 46 - 100 mmJoist separation: c/c 600 mmSystem Weight - c/c 600 mm: 2.06 kg/m²Materials:Steel, Z100 GalvFibre-reinforced polypropylenePoint Load Limit (50 x 50 mm): Between screws over joist - 7.08 kNOver screws over joist - 8.78 kN
Sponsored
Transforming an Attic into an Energy-Efficient Storage Space in South Wales with SubFloor Raised Flooring

Transforming an Attic into an Energy-Efficient Storage Space in South Wales with SubFloor Raised Flooring

Floor Levelling Systems Ltd

SubFloor raised flooring was used to renovate, raise and level a 25 m² loft to allow for deeper insulation near Llanelli, South Wales.The SubFloor system was used to transform an attic renovation. By increasing the void height, this revolutionary solution not only allowed for enhanced insulation but also significantly improved the energy efficiency of the entire building. Enhanced Energy Efficiency:By replacing the existing 100 mm insulation with a superior 200 mm insulation, the entire building's energy consumption underwent a drastic reduction. This upgrade meant lower energy bills, a reduced carbon footprint, and a more environmentally friendly space. Flawless Floor Levelling and Efficient Storage:Say goodbye to uneven floors and wasted space! With the introduction of the screw and joist system, the SubFloor system seamlessly transformed the attic. This innovative setup not only adjusted the uneven floor to become completely level but also paved the way for efficient storage solutions. 22 mm chipboard was fixed on top, supported by fibre-reinforced screws and high-quality pine, ensured that the SubFloor system effortlessly met all load requirements. Versatility and Speed:Flexibility was key in the successful implementation of the SubFloor system. Its adaptability to varying floor heights proved to be a true asset. The 3.6 m long joists allowed for easy setup and adjustment, effortlessly conforming to the unique shapes of different rooms. Even after installation, the joists could be easily raised or lowered to achieve the desired height, ensuring a swift and efficient assembly process. Testimony“Very glad I found your system as almost every leg needed to be a different length in this old house. The various loft legs products are not adjustable and the floor would have been like the rocky road to Dublin. Thanks and regards, Jim”Products:Wooden Joist 45 x 45 x 3600 mmSubFloor Screw 200 mmScrew Foot Construction:Joist separation c/c 400 mmBuilding height: 65 – 214 Data:System weight: 3.07 kg/m²                                                            Uniformly Distributed Load:9.32 kN/m² - Between screws7.96 kN/m² - Over screw at joist edge Materials:Pine T0-C24Fibre-reinforced PolypropylenePolyamide
Sponsored
Gaming Centre, Commercial Raised Floor - Skövde, SE

Gaming Centre, Commercial Raised Floor - Skövde, SE

Floor Levelling Systems Ltd

SubFloor flooring was used in a conversion of an industrial premise for youth gaming activities. This allowed insulation to separate the cold floor from the main area and for wiring installations under the floor.This simple and elegant solution raised and levelled the floor to allow for installations and insulation. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height.95 mm Rigid insulation was positioned on the insulation bearers and a 22 mm chipboard was placed on top.Products:Wooden Joist 45x45x3600 mmSubFloor Screw 200 mmSubFloor Screw FootInsulation Bearer 95 mmHeight Variation: 105 - 236 mmJoist separation: c/c 600 mmSystem Weight - c/c 600 mm: 2.82 kg/m²Materials:Pine T0-C24Fibre-reinforced polypropylenePolyamideCold Galvanised Sheet SteelPoint Load Limit (50 x 50 mm):Load next to screw over joist edge - 9.72 kNLoad between screws over joist edge - 15.85 kN
Sponsored
How NOT to fit a Wood Floor

How NOT to fit a Wood Floor

The Solid Wood Flooring Company

The crown line for the Herringbone E931 has been set out very well, however the floor has not been protected and the equipment has been left on the new floor.The actual floor will easily get damaged and the client will probably end up with a damaged floor and probably expensive repairs because of the lack of care.What should happen is that the floor should be covered at all times, and the site kept clean, with adhesive and other equipment kept off the new floor, that has been fitted
Sponsored
SubFloor Acoustic Raised Floor, Renovating 12 Apartments in Nottingham

SubFloor Acoustic Raised Floor, Renovating 12 Apartments in Nottingham

Floor Levelling Systems Ltd

SubFloor acoustic flooring was used to renovate, raise and acoustically dampen a 828 m² floor into 12 luxury apartments near Nottingham city centre.This simple and elegant solution raised an uneven floor up to 300 mm to allow for installations and insulation. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height. Acoustic feet were mounted onto the SubFloor screws for acoustic damping between apartments.Products:Wooden Joist 45x45x3600 mmSubFloor Screw 300 mmScrew Foot AcousticHeight Variation: 73 - 323 mmSystem Weight - c/c 600 mm: 2.86 kg/m²Materials:Pine T0-C24Fibre-reinforced VitamidePolyamidePoint Load 50 x 50 mm: 5.3 kN12.84 kN/m² - Between screws12.73 kN/m² - Next to screw over joist[According to SS-EN 1195:1998] Acoustic Damping: Up to 28 dB[rating according to ISO 717-2]
Sponsored
Apartment Renovation, Raised Steel Acoustic Floor - Båstad, SE

Apartment Renovation, Raised Steel Acoustic Floor - Båstad, SE

Floor Levelling Systems Ltd

SubFloor flooring was used to help renovate, raise and acoustically dampen concrete floors in apartments.The acoustic feet simply click onto the SubFloor screws and dampens any step noise up to 28 dB, this helps reduce; step noise, rebound noise and flanking transmission.This simple and elegant solution raised and levelled the floor to allow for installations and insulation underneath. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height.Products:Steel Joist 45x30x3800 mmSubFloor Screw 100 mmSubFloor Acoustic FootHeight Variation: 58 - 112 mmJoist separation: c/c 600 mmSystem Weight - c/c 600 mm: 2.21 kg/m²Materials:Steel, Z100 GalvFibre-reinforced polypropylenePolyamide + Rubber damping elementPoint Load Limit (50 x 50 mm):Between screws over joist - 6.78 kNOver screws over joist - 10.54 kN
Sponsored
Gresham Apartments, Raised Acoustic Floor - Nottingham UK

Gresham Apartments, Raised Acoustic Floor - Nottingham UK

Floor Levelling Systems Ltd

SubFloor acoustic flooring was used to help renovate, raise and acoustically dampen a 1318 m² old mill floor into 16 luxury apartments near Nottingham city centre.This simple and elegant solution raised an uneven floor by a step height to allow for installations and insulation. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height.Products:Wooden Joist 45x45x3600 mmSubFloor Screw 200 mmScrew Foot AcousticHeight Variation: 73 - 223 mmSystem Weight - c/c 600 mm: 2.65 kg/m²Materials:Pine T0-C24Fibre-reinforced polypropylenePolyamidePoint Load 50 x 50 mm: 5.3 kNUniformly Distributed Load:9.32 kN/m² - Between screws7.96 kN/m² - Next to screw over joistAcoustic Damping: Up to 28 dB[rating according to ISO 717-2]
Sponsored
Office Space, Tall Raised Floor - Stockholm, SE

Office Space, Tall Raised Floor - Stockholm, SE

Floor Levelling Systems Ltd

SubFloor flooring was used to help renovate and raise a 250 m² floor into an office with a large void in Stockholm, Sweden.This simple and elegant solution raised and levelled the floor to allow for installations and insulation. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height.Products:Wooden Joist 45x45x3600 mmSubFloor Screw 300 mmSubFloor Screw FootHeight Variation: 65 - 314 mmJoist separation: c/c 300 mmSystem Weight - c/c 300 mm: 3.99 kg/m²Materials:Pine T0-C24Fibre-reinforced polypropylenePolyamidePoint Load Limit (50 x 50 mm):Load next to screw over joist edge - 9.72 kNLoad between screws over joist edge - 15.85 kN
Sponsored
American walnut flooring in Canary Wharf Developments

American walnut flooring in Canary Wharf Developments

The Solid Wood Flooring Company

Marketing Rooms and Apartments for the Wood Wharf Development in Canary Wharf. However they wanted a more select floor which we were able to do by supplying 20% to 25% more than required to create a stunning near virtual Prime Black American Walnut floor at a fraction of the cost.A lot of other trades were also completing work at the site including the fit out of show apartments for the Wood Wharf Development. This meant that the floor had to be covered to protect the surface.The product was our E515 which is a 15mm thick oiled walnut.
Sponsored
American walnut flooring in Canary Wharf Developments

American walnut flooring in Canary Wharf Developments

The Solid Wood Flooring Company

Summer 2019 saw The Solid Wood Flooring Company work with Base Interior and other key suppliers to complete a refurbishment inspired by Scandi design in the affluent district of Kensington, London. Fitzhardinge House offers a crisp, clean and modern aesthetic, achieved by using our Light Brushed Fumed Raw Timber UV Cured Finish Flooring Suitable for underfloor heating, this 15mm thick flooring opened up the space to create a spacious area that would stand the test of time. This project demonstrated what can be achieved when trades and suppliers combine, creating a space that looks as impressive as it functions.
Sponsored
Roof Terrace, Outdoor Raised Floor - Västerås, SE

Roof Terrace, Outdoor Raised Floor - Västerås, SE

Floor Levelling Systems Ltd

SubFloor Outdoor Flooring was used to help renovate and raise a 650 m² roof into an outdoor terrace in Västerås, Sweden.This was built on top of the existing roof felt and used high-quality pressure impregnated wooden joists to create an even surface, level with the rest of the building. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height.Products:Pre-treated Wooden Joist 45x70x3600 mmSubFloor Screw 300 mmSubFloor Screw FootHeight Variation: 90 - 339 mmJoist separation: c/c 300 mmSystem Weight - c/c 300 mm: 10.72 kg/m²Materials:Pine T0-C24Fibre-reinforced polypropylenePolyamidePoint Load Limit (50 x 50 mm):Load next to screw over joist edge - 21.74 kNLoad between screws over joist edge - 16.43 kN
Sponsored
Cladding Stairs in Engineered Herringbone Parquet Flooring

Cladding Stairs in Engineered Herringbone Parquet Flooring

The Solid Wood Flooring Company

Few people realise that it is possible to clad old stairs with our engineered herringbone parquet floors. It is a specialist skill and you should only employ trusted professionals who have the specialist equipment. The parquet blocks used here are unfinished so that you get perfect square edges. They are then oiled after all other works are completed so that you get your perfect floor. There is no separate stair nose piece as the top layer of solid Oak is a good 4mm thick and this allows the fitters to create an accurate mitre join.
Sponsored
SubFloor Acoustic Raised Flooring Transforms and Enhances Luxury Hotel Apartments in Fowey, Cornwall.

SubFloor Acoustic Raised Flooring Transforms and Enhances Luxury Hotel Apartments in Fowey, Cornwall.

Floor Levelling Systems Ltd

This case study focuses on a prestigious project in Fowey, developed and constructed by Bailey Partnership and Brady Construction Services. In these luxury hotel apartments a raised acoustic flooring system, known as SubFloor, was successfully implemented. The project highlights the simplicity, speed of assembly, and flexibility of SubFloor, providing architects and contractors in the construction industry with a practical and efficient solution. Additionally, SubFloor's user-friendly features, such as easy height adjustments, garnered praise from the carpenters, enabling them to work more comfortably and efficiently. By offering a seamless and rapid installation process, superior acoustic performance, and convenient adjustability, the SubFloor system surpassed expectations and contributed to the project's overall success.Products:Wooden Joist 45 x 45 mmSubFloor Screw 300 mmScrew Foot Acoustic Constructions:Joist separation c/c 400 mmBuilding height: 73 – 323 Data:System weight: 3.43 kg/m²Acoustic damping: Up to 28 dB [rating according to ISO 717-2]Point Load 50 x 50 mm (c/c 400 mm):13.96 kN/m² - Next to screw over joist[According to SS-EN 1195:1998] Materials:Pine T0-C24Fibre-reinforced VitamidePolyamide + Rubber Damping Element
Sponsored
SubFloor Acoustic Raised Access Flooring Revitalises an Office space at Barnsley Civic

SubFloor Acoustic Raised Access Flooring Revitalises an Office space at Barnsley Civic

Floor Levelling Systems Ltd

The renovation project above the theatre in Barnsley, developed by HLM Architects and constructed by Code Building Solutions, successfully integrated the SubFloor Raised Access Floor system to meet the acoustic damping, height increase, and level installation requirements. The system's acoustic feet effectively reduced impact noise, rebound noise, and flanking transmission, creating a productive and comfortable office environment. The inclusion of fibre-reinforced screws and slow-grown Swedish pine ensured the system's compliance with load-bearing requirements. Contractors praised the simplicity and efficiency of the assembly process, reaffirming the system's suitability for architects and contractors in the construction industry. The SubFloor system proved to be a reliable and effective solution for achieving superior acoustic performance and efficiency in office renovations.Products:Wooden Joist 45 x 70 mmSubFloor Screw 300 mmScrew Foot Acoustic 25 Construction:Joist separation c/c 600 mmBuilding height: 112 – 364 mm Data:System weight: 4.50 kg/m²Acoustic damping: Up to 28 dB [rating according to ISO 717-2]Point Load 50 x 50 mm (c/c 600 mm):15.3 kN/m² - Next to screw over joist10.6 kN/m² - Between joists[According to SS-EN 1195:1998] Materials:Pine T0-C24Fibre-reinforced VitamidePolyamide + Thermoplastic Elastomer
Sponsored
Installing Wood Flooring in a Hallway

Installing Wood Flooring in a Hallway

The Solid Wood Flooring Company

Supplying and installing a floor in the Jorvik Viking Museum in the centre of York. The board installed was our E157 select grade 260mm wide engineered unfinished Oak. Being unfinished it and high quality it allowed for the river to be created using a router and stainless steel insert and different coloured oils. The museum opens in the spring of 2017 so please visit and see for yourself. If you have any innovative design projects in any location, please contact us directly on 01666 504015
Sponsored
Stair Cladding with Wood Flooring

Stair Cladding with Wood Flooring

The Solid Wood Flooring Company

We are able to manufacture engineered wood stair units to match our flooring with the same colour and finish.The stair units include the tread and riser and can be made to exact sizes if we have detailed drawings. This means installation costs will be less. These stair cladding units can be fully bonded to old stairs, concrete stairs or Steel stair structures.The cost of these stair units are considerably more than our standard stair nosings and a deposit will be required before production because they will be to your specification. Lead times are around 12 weeks.
Sponsored
Imaginative Wood Floor Installations

Imaginative Wood Floor Installations

The Solid Wood Flooring Company

Supplying and installing a floor in the Jorvik Viking Museum in the centre of York. The board installed was our E157 select grade 260mm wide engineered unfinished Oak. Being unfinished it and high quality it allowed for the river to be created using a router and stainless steel insert and different coloured oils. The museum opens in the spring of 2017 so please visit and see for yourself. If you have any innovative design projects in any location, please contact us directly on 01666 504015
Sponsored
Junckers Regal Sports Floor

Junckers Regal Sports Floor

New Era Floor Systems Ltd

Nike has transformed The Regal basketball court at the Black Prince Community Hub in South London, using Junckers Beech SylvaSport floor pre-finished with black oil over a New Era fully sprung sub-floor system.
Sponsored
LiteFlo® Lightweight Flowing Screed | Fast Floor Screed | First Floor Timber frame

LiteFlo® Lightweight Flowing Screed | Fast Floor Screed | First Floor Timber frame

SMET Building Products Ltd

We supplied our partner, Fast Floor Screed Ltd with SMET LiteFlo® Lightweight Flowing Screed for the first floor of a timber frame house. This lightweight screed is ideal for renovation projects where loading is an issue. This is a high quality pumpable, factory-produced, CE marked, self-levelling screed based on calcium sulphate. German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates – means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.Innovative SMET LiteFlo® is particularly suitable for use in timber-frame builds, suspended timber floors, tower blocks, apartments, and high-rise buildings. SMET demonstrates best practice in construction partnerships – providing a superior level of customer service to their Smet Supported Partners during the installation process.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET have a flooring compound or ready to use product suitable for your application.www.smetbuildingproducts.com or www.smet.ie
Sponsored
Mapei wood flooring adhesives used to install luxury flooring at prestigious Battersea Power Station apartments - (phase 1).

Mapei wood flooring adhesives used to install luxury flooring at prestigious Battersea Power Station apartments - (phase 1).

Mapei (UK) Ltd

Mapei products for the installation of wood flooring were specified to install floor coverings including over 63,000m2 of Domus wood flooring throughout all of the residential and penthouse apartments at Battersea Power Station, London. The construction of over 850 apartments at this iconic site has been completed during the first phase of building. With Mapei’s adhesive Ultrabond Eco S955 1K to furnish every apartment in the prestigious development. Ultrabond S955 can be used with all types and sizes of engineered and solid wood flooring, hence it’s suitability for the installation at Battersea Power Station.
Sponsored
SS400 Installation below Engineered Wood Flooring    (Soundsure 400 | 20mm Engineered Wood Flooring)

SS400 Installation below Engineered Wood Flooring (Soundsure 400 | 20mm Engineered Wood Flooring)

Interfloor Ltd

High performing acoustic underlay was selectedfor use below a 20mm engineered wood flooras part of a flooring refurbishment project in aprivate home. The SS400 was loose laid to the subfloor with the 20mmengineered wood flooring floated above. The tongue andgroove joints were bonded with PVA adhesive.Other points to include:• SS400 manufactured using recycled rubber crumb, so extremely environmentally friendly.• Durable - provides long lasting performance and will not deteriorate or collapse over time.• SS400 is a high performing acoustic underlay, ideally suited for use with wood flooring and laminates, providing excellent impact performance in excess of the UK buildingregulations.• Hygienic – naturally antimicrobial, anti-allergy and resistant to decay with low VOCs.Benefits of Soundsure 400• Exceeds the performance standards required in the UK Building Regulations for sound insulation• Suitable for use with underfloor heating systems• Manufactured using recycled materials and fully recyclable• Recycled rubber crumb ensures long-lasting acoustic performance• Cushioned underlay to provide underfoot comfort• Rubber crumb provides superb stability, performance and durability• Will not deteriorate or collapse over time.• Reduces subfloor preparation times as screed or smoothing compounds are not required• Green Label Plus accredited
Sponsored
'Flooring by Henton' Showroom - F. Ball products spark conversations at ‘Flooring by Henton’ refurbishment

'Flooring by Henton' Showroom - F. Ball products spark conversations at ‘Flooring by Henton’ refurbishment

Ball, F and Co Ltd

‘Flooring by Henton’ opted for F. Ball products to achieve a high quality LVT floor finish in the company’s own showroom. Firstly, contractors removed old carpet, LVT and wood floorcoverings from the 90m2 floor of the showroom. Contractors next applied Stopgap 1200 Pro levelling compound over the entire subfloor to create a perfectly smooth base for the receipt of floorcoverings. The showroom has a large glass front, therefore, Styccobond F48 PLUS high temperature grade vinyl adhesive was selected to install wood-effect vinyl planks to ensure the floorcoverings would hold firmly in place when exposed to extreme temperatures.
Sponsored
Using Specialist Wood Finishing Products to create a Unique Wood Floor

Using Specialist Wood Finishing Products to create a Unique Wood Floor

The Solid Wood Flooring Company

This case study shows the different affects you can get by using professional timber treatments. Our experts can help you choose your perfect bespoke finish and colour to match your interior décor. This is a specialist area and only professional fitters with finishing experience on site should be used. Some of the treatments require pre-treatment to change the tannins in the wood which will require buffing with a white pad before applying a top coat. Others are the latest lacquers that can be easily applied on site.
Sponsored
Multiple Junckers floors for award-winning office interior

Multiple Junckers floors for award-winning office interior

Junckers Ltd

No less than eight different solid wood floors from Junckers were used as part of the spectacular design for US company Slack’s new headquarters in San Francisco. Installed as both flooring and wall panelling, various timbers, colours and finishes were used to tell the interior story. A floor-by-floor tour takes you on a nature trail. Taking inspiration from the company CEO’s passion for the outdoors, architects Studio O+A used the Pacific Crest Trail as the basis for their design. All ten floors convey a different terrain found on the wilderness trail, from desert landscapes to mountain peaks. For a design centred around nature itself, the architects specified Junckers’ wooden floors for their natural beauty and functionality. The beauty of the grain pattern found in real wood can never be replicated, and a solid wood floor is a durable, sustainable choice for a busy office space. The project has received numerous design accolades and awards, including a place on the “2019 World’s 10 Most Beautiful Offices’ list. A floor by floor guide to Slack HQ:1st floor – Basecamp featuring Junckers Nordic Oak Classic + Black Oak on walls and seating pods2nd floor – Rocky desert featuring Junckers Oak Harmony plank flooring4th floor – Mountains featuring Junckers Oak Harmony plank flooring5th floor – Mountain lakes featuring Junckers Nordic Oak Harmony + Oak Harmony Driftwood Grey plank flooring6th floor – Waterfalls & streams featuring Junckers Nordic Oak Harmony plank flooring7th floor – Forest featuring Junckers Oak Variation Wild Hazel two-strip flooring8th floor – Volcano crater featuring Junckers Black Oak Harmony plank flooring + Textured Black Oak Variation as wall panelling9th floor – Glacier featuring Junckers Nordic Oak + Nordic Oak Harmony White Plus plank flooring10th floor – Summit featuring Junckers Oak Harmony Golden Pearl plank flooring
Sponsored
Quiet, solid wood flooring for student accommodation

Quiet, solid wood flooring for student accommodation

Junckers Ltd

Cottrell + Vermeulen Architecture has designed new, bright and airy postgraduate accommodation for Churchill College, Cambridge with interiors featuring Junckers’ solid maple flooring. Cottrell + Vermeulen won a competition to design the new buildings, 16 years after the studio completed a housing scheme on a neighbouring site. The 35 new units of accommodation comprise five studio flats and 30 en suite rooms with spacious communal areas on each floor, spread across three buildings. The design builds on the original architectural scheme, designed as an extension to CVA’s previous work on the site. The architects sought to recreate the warmth and brightness of the original college rooms from the 1960s and found Junckers maple flooring a good match. The choice of two-strip boards, where two staves of wood make up one floorboard, was also a reference to the narrow boards used in the original rooms. The naturally pale tone of the maple floor is matched by joinery in birch faced plywood to form a comfortable and welcoming space, ready for students to move into at the start of the new academic year. The floor was installed by VA Hutchison Flooring. Quiet floors in multiple occupancy buildings An important consideration for student accommodation is how impact sound travels through floors from one dwelling into another. Building regulations set out minimum standards for impact and airborne sound through floors which apply to residential buildings and buildings converted to new uses, including hotels and care homes. The floor finish will usually act in combination with other elements of the building to achieve the target levels of sound insulation. The design of the subfloor and ceiling beneath play an important role, as does the way the floor finish may need to be isolated from the walls that surround it, but there is no question that the right acoustic floor will control the transmission of impact sound. Junckers has a range of acoustics systems available which comply with building regulations. The newly updated New Era acoustic system is a height adjustable system for use on structural concrete slabs, block and beam floors and almost any other type of sound, dry load-bearing base. The New Era system uses acoustic cradles with 10mm thick recycled rubber pads, factory-fitted to the underside. The cradles are height adjustable using purpose-made packers, supporting laminated timber battens. 50mm thick mineral wool insulation is placed between the battens and Junckers 20.5mm or 22mm thick solid wood floorboards are fixed to the battens to complete the installation. The use of 36mm thick battens achieves an impact sound reduction of 27dB; and a 48mm thick batten achieves an impact sound reduction of 28dB, thus complying with building regulations. For Junckers 14mm thick solid wood flooring installed with Junckers’ Clip System, an impact sound reduction of 19dB can be achieved with Junckers’ 5mm thick CA2 Acoustic Underlay, loose laid with the floorboards installed on top as a floating layer, no fixings required. Junckers’ floor system specifications are available on NBS Plus and draft NBS clauses are available on request. Junckers also provides BIM Objects for all systems. Junckers solid hardwood floor systems are guaranteed for 25 years when installed by a Junckers Approved Contractor. Junckers Approved Maintenance Contractors offer a care scheme where the client’s floor is periodically inspected and maintained so as to keep floor in good condition and to  maximise its lifespan.
Sponsored
Sustainable wood flooring installed at restored Bath Abbey

Sustainable wood flooring installed at restored Bath Abbey

Junckers Ltd

RESTORATION ENSURES SUSTAINABLE FUTUREThe historic Bath Abbey has undergone extensive repair and conservation work along with the addition of new facilities. With its Footprint project, Feilden Clegg Bradley Studios sensitively restored the 1300-year-old place of worship and improved the accessibility, flexibility, and sustainability of the building. As part of reworking and improving the Abbey’s back of house facilities, FCBStudios designed the Song School, a new, timber-lined choir practice room where up to 60 singers can rehearse. The oak-panelled room features Junckers solid 20.5mm Oak Harmony plank flooring installed by Moran Floors. The solid oak further enhances the acoustics in the room, an important consideration to the Abbey. Said Huw Williams, Director of Music, Bath Abbey: ‘The floor of the new Song School is a beautiful feature, we are particularly appreciative of the acoustic properties of the floor. It really helps to create a suitable acoustic for rehearsing which has given our choirs a huge boost following a difficult year of lockdowns. The standard and finish of the floor is exceptional, it provides a warmth in contrast to the natural stone features and contributes enormously to the professional and high-quality character of these unique new spaces.’ The importance of high ethical standards was a key objective for materials sourcing on the project, and FCBStudios was able to rely on Junckers’ experience in procuring sustainably sourced and manufactured material in the specification process. Naturally low in carbon, Junckers solid hardwood flooring comes with sustainability credentials including EPDs, FSC®, PEFCTM and Indoor Climate certification as well as an A+ rating in the BRE Green Guide, which played an important part in the architects’ specification. Said Alex Morris, Associate, Feilden Clegg Bradley Studios: ‘FCBStudios selected Junckers wooden floors for the Bath Abbey offices and new choir rehearsal spaces because we needed to provide hard wearing and elegant floor finishes that would be sympathetic to the character and historic significance of the Grade 2 listed Georgian buildings.” In addition, Moran Floors fitted Junckers’ 15mm single stave blocks made in solid oak in a single herringbone pattern with a 129x15mm oak plank border in the ground floor reception area. The floor was sanded and finished with Junckers’ Rustic Oil on site. The reception spaces are made up a series of domestic-scale rooms original to the Georgian terrace, which contain many original features. The parquet floor was selected to complement and enhance the elegant grandeur of the building as a whole. A solid hardwood floor from Junckers has a crevice-free surface which cannot harbour dust or mites, easy to keep clean and contributes to a healthy indoor climate, one of the RIBA’s targets in its 2030 Climate Challenge for architects. Junckers floors carry the Danish Indoor Climate label, recognised by BREEAM, and have undergone extensive degassing and odour testing to ensure no harmful gasses are released into the room. Installing timber in an interior helps minimise static from electrical appliances and helps maintain an even temperature. A very old, historic building which forms part of the UK’s architectural heritage has been updated and adapted to secure its sustainable future. Junckers flooring with its proven long lifespan was an integral part of the project - expected to last well over 60 years, the floor forms part of the design to future-proof the Abbey. The Bath Abbey Footprint Project by FCBStudios has been shortlisted for Renewable Energy Project of the Year in the BusinessGreen Leaders Awards 2022. The awards celebrate the best of the UK’s green economy and burgeoning net-zero transition. This category recognises projects that have demonstrated a wide range of environmental and economic benefits associated with clean energy deployment and development. The £19.3 million programme of restoration, building works and interpretation will help to secure the Abbey’s physical future. This included repair and restoration of 2,400 floor stones conserved and re-laid, and a revolutionary underfloor heating system harnessing water from Bath’s hot springs. 
Sponsored
Degafloor FB System, Commercial Kitchen - Resin Flooring

Degafloor FB System, Commercial Kitchen - Resin Flooring

Degafloor Ltd

The National Flooring Company, a Degafloor Ltd approved installer, have received another complimentary review following a kitchen refurbishment on the 23rd floor at a popular 4-star hotel in Manchester. Making the most of the quieter, New Year period, the hotel decided to upgrade their kitchen floor. Having worked at other locations for the popular hotel chain, The National Flooring Company were contacted to provide advice and following a successful proposal, were asked to complete the refurbishment. The kitchen, which is situated on the 23rd floor, required meticulous planning to ensure that works could be completed with minimal disruption to the hotel’s guests. The existing vinyl floor within the kitchen had become worn and brittle and sections were beginning to lift, causing a potential trip hazard. The vinyl floor was removed to expose the tiled finish underneath. Any loose tiles that had debonded from the floor were also removed and infilled with Degafloor Deep Fill, quick curing repair mortar.The National Flooring Company laid a scrape coat, embedded with a promesh reinforcing membrane, prior to the installation of the Degafloor Full Broadcast System (FB). The Degafloor FB system is broadcast with rounded aggregate to provide an anti-slip finish and retains this feature even in wet conditions to ensure employee safety is always maintained. As with all Degafloor systems, they are seamless and impervious, ensuring the floor will not lift, as previously experienced with the existing vinyl floor finish. Degafloor MMA resin flooring systems are fully cured within 2 hours of installation, allowing the hotel to resume normal kitchen operating procedures shortly after completion. MMA resins have a distinctive odour, but with the correct management, installations can progress with very little disruption. The National Flooring Company used the kitchen extraction system and sealed all doorways to contain and manage the odour.The project was completed to the satisfaction of the Chief Engineer, Hilton MCR, who commented on how good the floor looked. “The restaurant being on the 23rd floor presented a logistical challenge.  However, after careful planning and consideration of our hotel operations, The National Flooring Company completed the installation efficiently and to a high standard.  We were impressed with the service from start to finish.”

Showing 1-36 of 2401

Feedback