School Flooring, Raised Floor - Skövde, SE

SubFloor flooring was used to help renovate and raise a concrete floor into a level school floor in Skövde, Sweden.

This simple and elegant solution raised and levelled the floor to allow for installations and insulation. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height.

45 mm Rigid insulation was positioned on the insulation bearers to leave a clear void underneath and a 22 mm chipboard was placed on top.

Products:

Wooden Joist 45x45x3600 mm

SubFloor Screw 100 mm

SubFloor Screw Foot

Insulation Bearer 45 mm

Height Variation: 50 - 111 mm

Joist separation: c/c 600 mm

System Weight - c/c 600 mm: 2.66 kg/m²

Materials:

Pine T0-C24

Fibre-reinforced polypropylene

Polyamide

Cold Galvanised Sheet Steel

Point Load Limit (50 x 50 mm):

Load next to screw over joist edge - 9.72 kN

Load between screws over joist edge - 15.85 kN