SPEEDLINE Independent Wall liner System Utilising Knauf Board
Verified by manufacturer 2 months ago
Speedline frame with 50 mm-wide I-Studs
Speedline frame with 50 mm-wide I-Studs
BES 6001
Certificate type
BSI Kitemark
Certificate type
EPD
Certificate type
ISO 14001 Environmental Management Systems
Certificate type
ISO 9001 Quality Management
Certificate type
UK Conformity Assessed (UKCA)
Certificate type
Independent wall lining system based on SPEEDLINE framing and Knauf boards.
Application
Suitable for use in the following sectors:
- Residential.
- Healthcare.
- Education.
- Commercial.
- Retail.
- Student accommodation.
- Renovation Maintenance Improvement (RMI).
Description
Independent wall lining system based on SPEEDLINE framing and Knauf boards.
Features and benefits:
- Designed to provide a lining solution that is totally free of the substrate.
- Can be used where other lining solutions such as plaster or direct bond are unsuitable.
- Provides a cavity for services to be routed through.
- A range of I-Stud widths between 50 and 146 mm achieves a wide range of height requirements: up to 7.2 metres without any additional bracing to the structure (it can be braced back for greater heights).
- Suitable for fixing all types of plasterboard including Speedline thermal laminate boards. Systems utilizing British Gypsum Gyproc board or Siniat board are available to specify separately.
- Speedline stud can hold insulation to improve levels of sound and thermal insulation.
Installation:
Speedline I-Studs are friction-fitted within Speedline tracks at nominal 600 mm centres. Board lining is fixed at maximum 300 mm centres to all perimeters and intermediate I-Studs using the appropriate length of Speedline drywall screw.
General information
Material | Steel Plasterboard |
Uniclass | |
CAWS | K10/155 Wall lining system (metal studs) K10/30 Metal stud |
Product range |
Specification data - Gypsum board wall lining systems
Damp-proof course | Manufacturer guidanceInsert requirements or omit. The manufacturer recommends ensuring the substrate is sound and free of any damp prior to installing the Speedline independent wall lining system. |
Support | 50 mm I-Stud (PI50) with standard track (SPT52).50 mm I-Stud (PI50) with Deep track (50 mm leg, SPEDT52).Manufacturer guidanceI-Stud: 38 mm flange; available in 2700, 3000 and 3600 mm lengths. Track supplied in 3000 mm lengths as standard. Speedline I-Studs can be spliced together to create longer lengths using a 600-mm length of the appropriate sized Speedline deep track and fixed with four Speedline wafer head screws to each flange. |
Insulation | Not required.25 mm-thick glass mineral wool.50 mm-thick glass mineral wool.Manufacturer guidanceBe aware that Speedline I-Stud is designed to hold insulation but also includes slots for routing of services. |
Linings | |
Inner layers | Knauf 12.5 mm Fire Panel.Guidance for specification option: Maximum height (studs at 600 mm centres):
Knauf 15 mm Fire Panel.Guidance for specification option: Maximum height (studs at 600 mm centres):
Knauf 15 mm Performance Plus.Guidance for specification option: Maximum height (studs at 600 mm centres): 2400 mm. Knauf 12.5 mm Soundshield Plus.Guidance for specification option: Maximum height (studs at 600 mm centres):
Knauf 15 mm Soundshield Plus.Guidance for specification option: Maximum height (studs at 600 mm centres):
Knauf 12.5 mm Wallboard.Guidance for specification option: Maximum height (studs at 600 mm centres):
Knauf 15 mm WallBoard.Guidance for specification option: Maximum height (studs at 600 mm centres):
Manufacturer guidanceMaximum heights calculated based on a limiting deflection of L/240 at 200 Pa. Consult manufacturer for details of 400 mm centre configurations. |
Face layer | To match inner layer.Guidance for specification option: For severe duty rating. Not available for Knauf 15 mm Performance Plus. Not required/ not applicable.Guidance for specification option: Standard for Knauf 15 mm Performance Plus. |
Fasteners | Speedline drywall screws.Guidance for specification option: Consult manufacturer's fixing and finishing solutions literature for options and insert requirements. |
Joint treatment | Speedline Drywall Fibreglass Tape.Speedline Ready Mix Joint Compound.Speedline Corner Bead Tape. |
Finish | Manufacturer guidanceInsert requirements or omit. |
System accessories | Speedline Fire Rated Acoustic Sealant.Speedline PB24 Partition Brace.Speedline FS24 Flat Bracing Strip.Speedline Service Support Plate.Speedline Putty Pads. |
Integral accessories | Speedline C-Studs. Guidance for specification option: For wall abutments, internal and external corners; size to correspond to I-Stud specified. |
Size (w x h) | Manufacturer guidanceInsert requirements for nominal width and height.
Maximum height dependent on stud and panel type/ configuration - see Inner layer guidance for details. |
Sustainability data
Third party certifications
BES 6001
BES 6001 Responsible Sourcing of Construction Products
BSI Kitemark
BIM Level 2 Kitemark - For Design and Construction Phase
BSI Kitemark
BSI Kitemarkâ„¢ for BIM Objects
EPD
Environmental Product Declaration EPD - Drylining
ISO 14001 Environmental Management Systems
ISO 14001:2015 Environmental Management System
ISO 9001 Quality Management
ISO 9001:2015 Quality Management System
UK Conformity Assessed (UKCA)
UKCA Declarations of Performance - Drylining
Literature
SPEEDLINE Wall Lining Systems
SPEEDLINE Fixings and Finishing Solutions
Product Data Sheet - Drylining
Similar products from Metsec (voestalpine Metsec)
SPEEDLINE Independent Wall liner System Utilising British Gypsum Gyproc Board
SPEEDLINE Independent Wall liner System Utilising Siniat Board
SPEEDLINE Wall liner System Utilising British Gypsum Gyproc Board
SPEEDLINE Wall liner System Utilising Knauf Board
SPEEDLINE Wall liner System Utilising Siniat Board
TRADELINE Independent Wall liner System Utilising British Gypsum Gyproc Board