NBS Source
List your products

Sopralene Flam Venti 180 AF

Third party certifications:
  • BBA Agrément Certificate

    Certificate type

  • QA Certificate

    Certificate type

Soprema UK

Styrene-butadiene-styrene (SBS) modified bitumen capsheet membrane with 180 g/m² composite polyester reinforcement.

Jump to:
+44 (0)330 058 0668 www.soprema.co.uk
Application

Used as single layer waterproofing on surfaces where partial adhesion is required.

Description

Membrane composed of styrene-butadiene-styrene (SBS) modified bitumen with composite polyester reinforcement. The upper surface is finished with slates, with the selvedge protected by a polypropene film. The lower surface has thermally activated SBS stripes alternated with non-stick stripes, protected by a thermofusible film.

Features and benefits:

  • Has a vapour-pressure and tension dispersion system.
  • Single layer system - torch-on or hot-air method including the overlaps.
  • Flexible until -20°C.
  • CE marked to BS EN 13707.

Applications:

Used as single layer waterproofing on surfaces where partial adhesion is required.

General information
Finish

Upper side: Slates with thermofusible film overlap protection

Lower side: Thermofusible bitumen stripes alternated with non-stick stripes protected by a thermofusible film

Material

SBS (styrene-butadiene-styrene) modified bitumen with 180 g/m² non-woven polyester reinforcement

Uniclass 2015 Reinforced bitumen roofing sheets (Pr_25_57_08_75)
Specification data
Product Reference

Sopralene Flam Venti 180 AF

Standard product features

Material:

SBS (styrene-butadiene-styrene) modified bitumen with 180 g/m² non-woven polyester reinforcement.

Finish:

  • Upper side: Slates with thermofusible film overlap protection.
  • Lower side: Thermofusible bitumen stripes alternated with non-stick stripes protected by a thermofusible film.

Colour:

Black slate.

Roll size (w x l):

1 x 6 m.

Thickness:

4.5 mm.

Technical properties:

  • Tensile force (to BS EN 12311-1): Longitudinal: 850 N/ 50 mm; transverse: 650 N/ 50 mm.
  • Elongation at maximum tensile force (to BS EN 12311-1): 45%.
  • Dimensional stability (to BS EN 1107-1): 0.5%.
  • Resistance to tearing (nail shank, to BS EN 12310-1): 175 N.
  • Flexibility at low temperature (to BS EN 1109): -20°C.
  • Flow resistance at elevated temperature (to BS EN 1110): 110°C.

Third party certifications

Additional certifications:

  • DoP: Certificate: WPBBE0347
Similar products from Soprema UK