MFT-S2S-2L-Hanger-Undercut Anchor

The ventilated façade two layers system consists of a specially designed bracket (MFT-S2S U/UI), and vertical/ horizontal aluminium profiles (MFT-S2S TT) for vertical substructure.

The brackets include different hole geometries in the base plate (for installing anchors or screws). When needed, the flexible point brackets, MFT-S2S U/UI, are used in order to fix the vertical profiles, holding up the wind loads and allowing the thermal expansion of the profile. The brackets can be supplied with (pre-installed) or without isolators. The vertical profiles are connected to the support brackets with specially designed screws for ventilated façade, S-AD, which avoids creating compressing forces from the profile against the wall brackets and keeps the profile connected by the support bracket in place.

Features and benefits:

• 60 mm adjustment capability of the profiles on the wall brackets.
• Brackets are available from 80–300 mm or without isolators from 75–295 mm.
• Only one support bracket per profile needed.
• Profiles up to 4 m length fixed in only one support bracket.
• Aluminium brackets and profiles according to EN 755-2; EN 573-3; EN 12020-2; EN 1090-3; EN AW 6063 T66 and EN1090.
• The isolator separates the substructure from the base material reducing the thermal bridge (S2S UI).
• Pre-assembled isolator.
• The isolator separates the substructure from the base material reducing the thermal bridge.
• Substructures can be designed with PROFIS façade generating technical and economically optimized solutions.
• Time and cost-saving solution due to the simpler and faster installation.
• Thermal bridge calculation according to EN ISO 10211-1.