NBS Source
List your products
Description

Shutter for use where security is a high priority, such as entrances to schools, hospital restricted areas, computer rooms and general retail outlets; up to 35 m². The shutters have been tested by the Loss Prevention Certificate Board and awarded 'Secured By Design'. The shutter is tested to LPS 1175 (7.0) and is security rated at SR3. Internal face-fix installation only. CE marked to harmonized product standard BS EN 13241-1.

General information
Specification data - Roller shutters
Product Reference

LPSSHUT-3

Colour

Galvanized

BS

Insert requirements.

RAL

Insert requirements.

Battery back-up

Not required

Required

Standard product features

Curtain slat:

  • Double skin carbon steel insulated with 81 mm face. Wall thickness 1.2 mm, enclosing polystyrene insulation.
  • Standard galvanized finish. Colour finishes available on request. Plastisol range or polyester powder coated.
  • Visible surface: 81 mm.
  • Profile height: 100 mm.
  • Weight: 37 kg/m².

Housing:

  • Manufactured from 0.9 mm galvanized steel sheet.
  • End caps fabricated from plate steel.

Shutter height:

  • Up to 2500 mm: Box size 400 mm.
  • Up to 3500 mm: Box size 450 mm.
  • Up to 5000 mm: Box size 500 mm.

Guide channels/ bottom slat:

  • Steel section angle 100 x 63 mm attached to the bottom slat on attack face.
  • Guide channel depth: 70 mm, with a 85 mm face.
  • Standard galvanized finish, other colours on request.
  • Guide channels are bolted onto 100 x 50 x 6 mm angle.

Locking mechanisms:

Incorporates a bullet locking system situated 1 m from ground level, fixed to each guide channel on all shutters; side anchors inside guide; central ground anchor on the bottom lath on shutters over 3 m wide. Lock isolator kits available to prohibit operation of the shutter whilst in the locked position.

Manufacturing standards:

  • Fully CE marked.
  • Mechanical aspects: BS EN 12604, safety in use of power assisted doors.
  • Side guide protection: BS EN 12604-4.5.1 and BS EN 12453-5.1.1.3.
  • Protection: Against crushing, shearing or drawing in.
  • Electrical safety: Depending on use.
  • Watertightness: To BS EN 12489.
  • Resistance to windload: To BS EN 12444.
  • Thermal resistance: To BS EN 12428.
  • Air permeability: To BS EN 12427.
  • Opto safety edge self-monitoring: To BS EN 12453-5.1.1.5.
  • Anti-fall back device: To BS EN 12453-5.1.1.5.
  • Installation instructions: To BS EN 12635-4.1.1.1.
  • Durability of mechanical performance: To BS EN 12635-4.1.1.1.
  • LPS 1175 test carried out by: BRE (Building Research Establishment).

Product Options

Operation:

Electric – single-phase tubular motor or external motor in single or three-phase with push button control. High security wired or wireless keypad for installations on the 'attack' face of an opening (only approved switches may be used on the external face of an opening). Manual override by removable handle (for tubular motors), haul chain (for externally mounted motors).

Similar products from UK Roller Shutters Ltd