Security shutter for high security commercial sites and shopfront applications, up to 50 m². The steel perforated shutters have been tested by the Loss Prevention Certificate Board and awarded 'Secured By Design'. The shutter is tested to LPS 1175 (7.0) and is security rated at SR2. Internal face-fix, or internal reveal-fix installations. CE marked to harmonized product standard BS EN 13241-1.

General information

Uniclass 2015

Pr_30_59_84_73 Roller shuttersPrimary


L20/60 Doors

L20/610 Roller shutters/ curtains

Specification data - Roller shutters

Product Reference





Insert requirements.


Insert requirements.

Battery back-up

Not required


Standard product features

Curtain slat:

  • Single skin 76 mm curved steel; lath wall thickness 1.2 mm.
  • Standard galvanized finish. Colour finishes available on request. Plastisol range or polyester powder coated.
  • Visible surface: 76 mm.
  • Profile height: 85 mm.
  • Weight: 16.5 kg/m².


  • Manufactured from 0.9 mm galvanized steel sheet.
  • End caps fabricated from plate steel.

Shutter height:

  • Up to 2500 mm: Box size 305 mm.
  • Up to 4000 mm: Box size 355 mm.
  • Up to 5500 mm: Box size 400 mm.

Guide channels/ bottom slat:

  • Galvanized steel bottom rail in T shape.
  • Depth: 44 mm, with a 65 mm face.
  • Standard galvanized finish, other colours on request.
  • Guide channels are bolted onto angle for face fixed installations, or to 5 mm wall box section for reveal fit.

Locking mechanisms:

Incorporates a bullet locking system situated 1 m from ground level, fixed to each guide channel on all shutters; side anchors inside guide; central ground anchor on the bottom lath on shutters over 3 m wide. Lock isolator kits available to prohibit operation of the shutter whilst in the locked position.

Manufacturing standards:

  • Fully CE marked.
  • Mechanical aspects: BS EN 12604, safety in use of power assisted doors.
  • Side guide protection: BS EN 12604-4.5.1 and BS EN 12453-
  • Protection: Against crushing, shearing or drawing in.
  • Electrical safety: Depending on use.
  • Watertightness: To BS EN 12489.
  • Resistance to windload: To BS EN 12444.
  • Thermal resistance: To BS EN 12428.
  • Air permeability: To BS EN 12427.
  • Opto safety edge self-monitoring: To BS EN 12453-
  • Anti-fall back device: To BS EN 12453-
  • Installation instructions: To BS EN 12635-
  • Durability of mechanical performance: To BS EN 12635-
  • LPS 1175 test carried out by: BRE (Building Research Establishment).

Product Options


Electric – single-phase tubular motor or external motor in single or three-phase with push button control. High security wired or wireless keypad for installations on the 'attack' face of an opening (only approved switches may be used on the external face of an opening). Manual override by removable handle (for tubular motors), haul chain (for externally mounted motors).

Similar products from UK Roller Shutters Ltd