Compare

Lasta-Grip Decking - Composite Decking Board

Name: Lasta-Grip Decking - Composite Decking Board
Brand: Millboard Company Ltd, The
SKU: 3zWZGEz1C6QZrYQ7KaCVSQ

Verified by manufacturer 2 months ago

Millboard Company Ltd, The

Third party certifications:

Made in Britain
Certificate type
Antislip DIN EN 16165
Certificate type

Composite decking with integral textured strips.

Jump to:

BOS

+44 (0)24 7643 9943 Website

Application

Use Millboard decking for all standard outdoor flooring applications (e.g. in residential, commercial, education, healthcare, leisure and hospitality) including:

Ground level terraces/ patios;
Roof level terraces;
Balconies (subject to Building Control);
Podium decks;
Public spaces/ areas;
Pathways;
Boardwalks;
Pool surrounds;
Jetties/ pontoons/ marinas.

Millboard can be used as the decorative face for most outdoor designs, as long as it is fixed to a structural element.

Installation:

For all applications Millboard decking boards to be installed with a 4 mm gap between the boards and a 1 mm gap at butt ends, to facilitate drainage. There is no need for a ventilation gap to be left under Millboard decking boards. The maximum unsupported overhang for the boards is 50 mm, each cut board must be supported by a minimum of three joists. Each board must be screwed down with 2 x Millboard Durafix® stainless steel screw fixings where a board crosses a joist, and 3 x Millboard Durafix® stainless steel screw fixings at the ends of the boards.

Ground level application (soft surface):

Millboard decking boards installed over DuoSpan 99 mm Joists and Beams, Beams supported by Plas-Pro Posts concreted into the ground. Installed with DuoSpan brackets to the recommendations set out in installation guide found on manufacturers website.

Hard surfaces application (roof terrace, concrete base):

Millboard decking boards installed over DuoSpan Joists, Joists supported by DuoLift joists supports onto a solid/stable base. Installed with DuoSpan brackets to the recommendations set out in installation guide found on manufacturers website.

Joist spacing:

The Lasta-Grip boards need to be supported at 400 mm centres for residential applications, for commercial applications, bridges, balconies and steps this needs to be reduced to 300 mm centres.

Description

The Lasta-Grip® collection combines the attractive appearance of our Enhanced Grain boards with a unique textured design that offers outstanding slip-resistance, without the rough feel of conventional gritted strip boards. Perfect for commercial areas where safety is paramount, but appearance is important.

The structural core of Millboard decking is a blend of natural minerals bonded in a polymer resin, with long fibre reinforcement for mechanical strength and durability. The top surface is a textured, resilient Lastane® layer which is chemically melded to the core and hand-tinted using 2K component pigments that resist fading and UV damage.

Features and benefits:

Hand moulded and coloured - Skilfully hand-crafted to ensure a high quality, premium product.
Natural wood look - Moulded from selected oak for an organic, realistic wood-grain appearance.
UK made, UK backed - Designed and manufactured in the UK, tested independently globally.
Recycled materials - Recycled materials and renewable biopolymers are used within our boards.
Integrated UV stabilizers - UV stabilized for better performance and fade resistance over time.
Wood free - Wood free composition prevents rot, warping and insect infestation.
Low maintenance - No staining or oiling needed. Only seasonal cleaning required.
‘Lost-head’ fixings - Durafix fixings are virtually hidden beneath the unique Lastane surface.
Soft-touch surface - Unique Lastane layer means no splinters on the surface.
Mould resistant - Unlike wood, it is actively resistant to mould and fungus.
High slip-resistance - Lower slip potential than wood due to the pliable Lastane layer.
Moisture resistant - Due to the non-porous composition, no sealing is required.
Maximum durability - Fibre reinforced core provides strength and durability whilst reducing weight.

General information

Color	Brown Guidance for specification option: Coppered Oak Gold Guidance for specification option: Golden Oak
Finish	Textured Guidance for specification option: Moulded from hand selected prime oak masters with integrated grip strips.
Material	Composite Guidance for specification option: Millboard decking board is a polyurethane resin mineral board, moulded from real oak masters, and hand-finished.
Shape	Rectangle
Length	3600 mm
Width	200 mm
Height	32 mm
Warranty description	25 year Guidance for specification option: 25 Year Limited Structural Decking Warranty (Residential Only) Ten year Guidance for specification option: 10 Year Limited Structural Decking Warranty (anything other than residential)

Uniclass	Pr_25_71_63_72 Recycled plastics deck boardsPrimary
CAWS	Q55/110 Deck Q55/380 Deck boards

Specification data - Recycled plastics deck boards

Profile	Moulded from hand selected prime oak samples with integral textured strips.
Finished size	-
Section	200 x 32 mm.
Length	3600 mm.

Colour	Coppered Oak. Golden Oak.
Fixings	Millboard Durafix® stainless steel decking screws 4.5 x 60 mm. Guidance for specification option: For fastening decking onto timber joists. Millboard Durafix® stainless steel decking screws 4.5 x 45 mm. Guidance for specification option: For fastening decking onto Plas-Pro or DuoSpan joists. Manufacturer guidance See Accessories for related fixings.
Accessories	Fascia board. Guidance for specification option: To match decking colour unless specified otherwise. Can be specified separately. Requires Millboard Durafix® stainless steel fascia screws 4.5 x 35 mm. Size: 3600 x 146 x 16 mm (length width x depth). Weight: 6.1 kg per board. Coverage: 1.85 boards per m². Construction: Polymer resin core/ elastomer surface layer. Bullnose board. Guidance for specification option: To match decking colour unless specified otherwise. Can be specified separately. Size: 3600 x 150 x 32 mm (length width x depth). Weight: 9.3 kg per board. Construction: Polymer resin core/ elastomer surface layer. Subframe. Guidance for specification option: Can be specified separately. Consult manufacturer for options and insert details. Joist supports. Guidance for specification option: Can be specified separately. Consult manufacturer for options and insert details. Other. None. Show more
Weight	17.5 kg/m². Guidance for specification option: 12.9 kg per full board.
Coverage	1.36 boards per m².
Slip resistance	To BS 7976-2 (PTV), 43 (wet); 58 (dry). Manufacturer guidance Test reports available on request.
Installation	Manufacturer's standard. Guidance for specification option: For all applications the manufacturer recommends a 4 mm space between the sides of boards (or 6 mm if using the DuoFix side-fixing guide) and 1 mm gap at the ends on butt joints. A 10 mm gap should be left between the boards and any abutting vertical surface to facilitate drainage. The maximum unsupported overhang for the boards is 50 mm and each cut board must be supported by a minimum of three joists. Where a board crosses a joist, two Durafix fixings will be needed. At the end of the boards three Durafix fixings are recommended.
Flexural strength	To ISO 14125, 15.8 MPa. Manufacturer guidance Test reports available on request.
Spacing	4 mm gap between boards, 1 mm gap at the ends of the boards. Manufacturer guidance Board.
Load	To ISO 14124 ultimate load, at 400 mm span: 5423 N; at 300 mm span: 7107 N. Manufacturer guidance Test reports available on request.
Top layer	Lastane®. Guidance for specification option: The top surface is a textured, resilient Lastane® layer which is chemically melded to the core and hand-tinted using 2K component pigments that resist fading and UV damage.
Edges	Rounded (moulded).
Spacing	Residential, 90° to joists - 400 mm centres. Guidance for specification option: 2.5 kN/m² uniform distribution load. Commercial, 90° to joists - 300 mm centres. Guidance for specification option: 5 kN/m² uniform distribution load. Residential, 45° to joists - 300 mm centres. Guidance for specification option: 2.5 kN/m² uniform distribution load. Commercial, 45° to joists - 240 mm centres. Guidance for specification option: 5 kN/m² uniform distribution load. Manufacturer guidance The Lasta-Grip boards need to be supported at 400 mm centres for residential applications, for commercial applications, bridges, balconies and steps this needs to be reduced to 300 mm centres.

Sustainability data

Country of material origin	United Kingdom Guidance for specification option: Material origin varies however is within UK and Europe.
Country of product manufacture	United Kingdom
Material	Composite Guidance for specification option: Millboard decking board is a polyurethane resin mineral board, moulded from real oak masters, and hand-finished.
Manufacturing plant location	Oxford Rd, Ryton-on-Dunsmore, Coventry CV8 3EJ, UK
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	39 kg CO₂ eq/unit Self declared
Recyclability	Guidance for specification option: Not currently recycled but upcycled and used as path edging, planters, seating and other outdoor creations. Municipal incineration of Millboard provides effective energy recovery.
Recycled content As defined in clause 7.8 of BS EN ISO 14021	38 % Guidance for specification option: Over a third of the raw materials used for making the structural core of Millboard is recycled.