NBS Source
I'm a manufacturer

Weathered Oak Decking - Composite Decking Board

Verified by manufacturer 4 months ago

Millboard Company Ltd, The Third party certifications:
  • Antislip DIN EN 16165

    Antislip DIN EN 16165

    Certificate type

  • Made in Britain

    Made in Britain

    Certificate type

Composite decking with weathered, aged oak finish.

Jump to:
BOS
+44 (0)24 7643 9943 Website

Application

Use Millboard decking for all standard outdoor flooring applications (e.g. in residential, commercial, education, healthcare, leisure and hospitality) including:

  • Ground level terraces/ patios;
  • Roof level terraces;
  • Balconies (subject to Building Control);
  • Podium decks;
  • Public spaces/ areas;
  • Pathways;
  • Boardwalks;
  • Pool surrounds;
  • Jetties/ pontoons/ marinas.


Millboard can be used as the decorative face for most outdoor designs, as long as it is fixed to a structural element.


Installation:

For all applications Millboard decking boards to be installed with a 4 mm gap between the boards and a 1 mm gap at butt ends, to facilitate drainage. There is no need for a ventilation gap to be left under Millboard decking boards. The maximum unsupported overhang for the boards is 50 mm, each cut board must be supported by a minimum of three joists. Each board must be screwed down with 2 x Millboard Durafix® stainless steel screw fixings where a board crosses a joist, and 3 x Millboard Durafix® stainless steel screw fixings at the ends of the boards.


Ground level application (soft surface):

Millboard decking boards installed over DuoSpan 99 mm Joists and Beams, Beams supported by Plas-Pro Posts concreted into the ground. Installed with DuoSpan brackets to the recommendations set out in installation guide found on manufacturers website.


Hard surfaces application (roof terrace, concrete base):

Millboard decking boards installed over DuoSpan Joists, Joists supported by DuoLift joists supports onto a solid/stable base. Installed with DuoSpan brackets to the recommendations set out in installation guide found on manufacturers website.


Joist spacing:

The Weathered Oak boards need to be supported at 400 mm centres for residential applications, for commercial applications, bridges, balconies and steps this needs to be reduced to 300 mm centres.

Description

Beautifully aged in appearance, the Weathered Oak collection is moulded from over a century-old oak boards and is hand-coloured with authentic tones.

Providing a timeless look, Weathered Oak retains its natural beauty and offers a surface with minimal maintenance and very high slip resistance even in wet conditions.

The structural core of Millboard decking is a blend of natural minerals bonded in a polymer resin, with long fibre reinforcement for mechanical strength and durability. The top surface is a textured, resilient Lastane® layer which is chemically melded to the core and hand-tinted using 2K component pigments that resist fading and UV damage.


Features and benefits:

  • Hand moulded and coloured - Skilfully hand-crafted to ensure a high quality, premium product.
  • Natural wood look - Moulded from selected oak for an organic, realistic wood-grain appearance.
  • UK made, UK backed - Designed and manufactured in the UK, tested independently globally.
  • Recycled materials - Recycled materials and renewable biopolymers are used within the boards.
  • Integrated UV stabilizers - UV stabilized for better performance and fade resistance over time.
  • Wood free - Wood free composition prevents rot, warping and insect infestation.
  • Low maintenance - No staining or oiling needed. Only seasonal cleaning required.
  • ‘Lost-head’ fixings - Durafix fixings are virtually hidden beneath the unique Lastane surface
  • Soft-touch surface - Unique Lastane layer means no splinters on the surface.
  • Mould resistant - Unlike wood, it is actively resistant to mould and fungus.
  • High slip-resistance - Lower slip potential than wood due to the pliable Lastane layer.
  • Moisture resistant - Due to the non-porous composition, no sealing is required.
  • Maximum durability - Fibre reinforced core provides strength and durability whilst reducing weight.

General information

Color

Brown

Guidance for specification option:

Vintage.

Grey

Guidance for specification option:

Driftwood.

Black

Guidance for specification option:

Embered.

Finish

Textured

Guidance for specification option:

Moulded from hand selected century old oak masters.

Material

Composite

Guidance for specification option:

Millboard decking board is a polyurethane resin mineral board, moulded from real oak masters, and hand-finished.

Shape

Rectangle

Length

3600 mm

Width

200 mm

Height

32 mm

Warranty description

25 year

Guidance for specification option:

25 Year Limited Structural Decking Warranty (Residential Only)

Ten year

Guidance for specification option:

10 Year Limited Structural Decking Warranty (anything other than residential)

Uniclass

Pr_25_71_63_72 Recycled plastics deck boardsPrimary

CAWS

Q55/110 Deck

Q55/380 Deck boards

Specification data - Recycled plastics deck boards

Profile

Moulded.

Finished size

-

Section

200 x 32 mm.

Length

3600 mm.

Colour

Vintage.

Guidance for specification option:

Dark brown.

Embered.

Guidance for specification option:

Black.

Driftwood.

Guidance for specification option:

Grey.

Fixings

Millboard Durafix® stainless steel decking screws 4.5 x 45 mm.

Guidance for specification option:

For fastening decking onto Plas-Pro or DuoSpan joists.

Millboard Durafix® stainless steel decking screws 4.5 x 60 mm.

Guidance for specification option:

For fastening decking onto timber joists.

Manufacturer guidance

22 fixings required per board.

Accessories

Fascia board.

Guidance for specification option:

Colour to match decking board unless specified otherwise.

Can be specified separately.

Requires Millboard Durafix® stainless steel fascia screws 4.5 x 35 mm.

  • Size (length x width x depth): 3600 x 146 x 16 mm.
  • Weight: 6.1 kg per board.
  • Coverage: 1.85 boards per m².
  • Construction: polymer resin core/ elastomer surface layer.

Bullnose board.

Guidance for specification option:

Colour to match decking board unless specified otherwise.

  • Size (length x width x depth): 3600 x 150 x 32 mm.
  • Weight: 9.3 kg per board.
  • Construction: polymer resin core/ elastomer surface layer.

Subframe.

Guidance for specification option:

Can also be specified separately.

Consult manufacturer for options and insert details.

Joist supports.

Guidance for specification option:

Can also be specified separately.

Consult manufacturer for options and insert details.

Flexible edgings.

Guidance for specification option:

Can also be specified separately.

Consult manufacturer for options and insert details.

Show more

Weight

17.5 kg/m².

Guidance for specification option:

12.9 kg per board.

Coverage

1.36 boards per m².

Slip resistance

To BS 7976-2 (PTV), 41 (wet); 54 (dry).

Manufacturer guidance

Test reports available on request.

Installation

Manufacturer's standard.

Guidance for specification option:

For all applications the manufacturer recommends a 4 mm space between the sides of boards (or 6 mm if using the DuoFix side-fixing guide) and 1 mm gap at the ends on butt joints.

A 10 mm gap should be left between the boards and any abutting vertical surface to facilitate drainage.


The maximum unsupported overhang for the boards is 50 mm and each cut board must be supported by a minimum of three joists. Where a board crosses a joist, two Durafix fixings will be needed. At the end of the boards three Durafix fixings are recommended.

Surface finish

Textured.

Guidance for specification option:

Moulded from over a century-old oak boards.

Flexural strength

To ISO 14125, 12.8 MPa.

Manufacturer guidance

Test reports available on request.

Load

To ISO 14124 ultimate load, at 400 mm span: 4325 N; at 300 mm span: 5901 N.

Manufacturer guidance

Test reports available on request.

Top layer

Lastane® layer.

Guidance for specification option:

The top surface is a textured, resilient Lastane® layer which is chemically melded to the core and hand-tinted using 2K component pigments that resist fading and UV damage.

Edges

Rounded (moulded).

Spacing

Residential, 90° to joists - 400 mm centres.

Guidance for specification option:

2.5 kN/m² uniform distribution load.

Commercial, 90° to joists - 300 mm centres.

Guidance for specification option:

5 kN/m² uniform distribution load.

Residential, 45° to joists - 300 mm centres.

Guidance for specification option:

2.5 kN/m² uniform distribution load.

Commercial, 45° to joists - 240 mm centres.

Guidance for specification option:

5 kN/m² uniform distribution load.

Sustainability data

Country of material origin

United Kingdom

Guidance for specification option:

Material origin varies however is within UK and Europe.

Country of product manufacture

United Kingdom

Material

Composite

Guidance for specification option:

Millboard decking board is a polyurethane resin mineral board, moulded from real oak masters, and hand-finished.

Manufacturing plant location

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

39 kg CO₂ eq/unit

Self declared

Recyclability

Guidance for specification option:

Not currently recycled but upcycled and used as path edging, planters, seating and other outdoor creations. Municipal incineration of Millboard provides effective energy recovery.

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

38 %

Guidance for specification option:

Over a third of the raw materials used for making the structural core of Millboard is recycled.

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit
-

4

IFC
-

3

Third party certifications

Antislip DIN EN 16165

Antislip DIN EN 16165

Weathered Oak Slip Test Certificate (Shod Foot)

Made in Britain

Made in Britain

Made In Britain Certificate

Literature

Millboard Collection Brochure 2024

Millboard Collection Brochure 2024

Millboard Decking Installation Guide 2024

Millboard Decking Installation Guide 2024

Millboard Weathered Oak Spec Sheet

Millboard Weathered Oak Spec Sheet

Similar products from Millboard Company Ltd, The

Bullnose Boards - Edges of Decks and Steps

Bullnose Boards - Edges of Decks and Steps

Enhanced Grain Decking - Composite Decking Board

Enhanced Grain Decking - Composite Decking Board

Fascia Boards - Edges of Decks

Fascia Boards - Edges of Decks

Flexible Edgings - Bullnose/ Square Decking Edging Profiles

Flexible Edgings - Bullnose/ Square Decking Edging Profiles

Lasta-Grip Decking - Composite Decking Board

Lasta-Grip Decking - Composite Decking Board