Verified by manufacturer 5 months ago
BBA Agrément Certificate
Rigid PIR insulation for warm flat roofs under mechanically fixed single ply membranes.
For warm flat roofs under mechanically fixed single-ply membrane waterproofing systems.
Eurothane Eurodeck™ insulation is a high performance rigid polyisocyanurate (PIR) foam board for use in warm flat roofs under mechanically fixed single ply membrane waterproofing systems. It is faced on both sides with a multi-layer coated aluminium foil W/m·K.
To ensure adequate drainage the roof should have a minimum finished fall of 1:80. This may mean designing for twice the minimum finished fall to account for building inaccuracies, roof deflection and building settlement.
With increasing levels of insulation it is important to ensure the continuity of insulation at the junction of elements.
The wind uplift force exerted on the roof will vary according to geographical location, site location and building height. Reference should be made to BS 6399 and the membrane manufacturer’s recommendations for the number of fixings and the fixing pattern.
Features and benefits:
J42/10 Warm deck roof covering
J42/420 Rigid urethane foam insulation
To BS EN 13165.
(When tested in accordance with BS 476-3: 2004, the rating achieved will vary depending on the single ply membrane used).
To EN 13501-1, Euroclass F.
Class 1 (BS 476-7).
Thermal conductivity (maximum)
Compressive strength at 10% deformation
Exceeds 150 kPa at yield.
Suitable for loads associated with maintenance traffic. For heavier traffic, extra precautions should be taken (consult the membrane manufacturer for appropriate details). Care must be taken to avoid damage to boards by impact or concentrated loads during installation.
Face size (length x width)
2400 x 1200 mm.
± 30 kg/m³.
Faced on both sides with a multi-layer coated aluminium foil.
Country of product manufacture