Arbosil 1071

Application Instructions

Joint Preparation

The joint surfaces must be clean, dry and free from all contamination. Use ARBO Cleaners as appropriate. ARBO Primer 2650 is required on some substrates. Contact ARBO Technical Services for specific advice regarding primer and cleaner.

Joint Backing

Mineral wool or closed cell, cross-linked polyethylene foam.

Joint Size Suitability

Joint width

Minimum 6mm Maximum 25mm (single application) for advice on multiple applications please contact ARBO Technical Services.

All joint preparation, priming, and sealant application should be carried out in accordance with BS 8000 Part1 –6: 1997 + A1: 2010 the British Standard for the sealing of joints in buildings using sealants.

Ensure all use of Arbosil 1071 is within the scope of the fire tests and accords with joint seal dimensions, backing materials and any other considerations necessary to achieve a specific level of fire integrity. Copies of fire test reports are freely available from ARBO Technical Services.

Packaging

25 x 380ml Polyethylene Cartridges per box. Polyethylene Nozzles are included in each box

_{Important: The information is given in good faith and based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control. It is the user and specifier’s responsibility to ensure ARBO product is suitable for the intended use: consult ARBO Technical Services for specific advice. Goods are supplied subject to the Company’s terms and conditions of sales, a copy of which is available on request.}