Juta UK Ltd
Ground Gas Protection Experts - Best Products, Best Service, Best Price
+44 (0)1772 754177 www.juta.co.uk
Showing 1-36 of 58
JUTA GP® Titantech DPC
Juta UK Ltd
GP® TITANTECH DPC Gas and Hydrocarbon Resistant DPC is a unique single layer, embossed High Performance DPC. GP® TITANTECH DPC is specifically designed and manufactured to perform as a Methane, Carbon dioxide, VOC, Radon & Moisture resistant damp proof course.
JUTA GP® Radon DPC
Juta UK Ltd
GP® Radon DPC Radon Resistant DPC is a unique tri-polymer High Performance DPC. GP® Radon DPC is specifically designed and manufactured to perform as a Radon & Moisture resistant damp proof course.
JUTA GP® Radon Sump
Juta UK Ltd
GP® Radon Sump acts as an extraction point for radon gases beneath buildings within Radon affected areas. Radon sumps are positioned within a permeable granular layer beneath ground floor slabs and subsequently connected to an extraction fan to minimise the penetration of hazardous Radon gas into the building.
JUTA Hydrolock
Juta UK Ltd
JUTA Hydrolock - is a mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite embedded between two layers of geotextile. The internal natural sodium bentonite swells in contact with water to form a low permeability waterproofing barrier.
JUTA HDPE 0.6mm
Juta UK Ltd
HDPE 0.6mm is a mono layer, High-density polyethylene membrane specifically designed and manufactured to perform as a robust waterproofing barrier protection system, which is suitable for use in various demanding geomembrane applications such as SUDS, Root Barrier, Waterproofing and Radon Protection and Permeable Paving.
HDPE 0.6mm is a fully weldable, category 2 attenuation grade liner fully conformant to C753 and BS7533-13 and is CE marked for use in the following application areas: EN13967 (A/T).
JUTA 2020 Product Brochure
Juta UK Ltd
JUTA 2020 Product Brochure
JUTA GP® Primer
Juta UK Ltd
Technical datasheet for JUTA GP® Primer to be used in conjunction with JUTA WP SAM, JUTA GP1® SAM & JUTA GP Titantank
JUTA GP® Vent Box & Components
Juta UK Ltd
JUTA GP® VENT BOX Is a ground level ventilation unit designed to work in combination with JUTA GP® VOID VENT products to provide passive inflow and outflow of air and ground gas.
The Vent Box is a fully modular system which provides a practical and aesthetic method of venting ground gases from beneath a building, to the external atmosphere. The vent boxes are designed to be installed within the external landscaping.
JUTA Hydrolock 2
Juta UK Ltd
JUTA Hydrolock 2 - is a mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite embedded between two layers of geotextile. The internal natural sodium bentonite swells in contact with water to form a low permeability waterproofing barrier.
JUTA UK GP2® High Performance DPM
Juta UK Ltd
JUTA GP 2 Gas Barrier is a multi-layer, low-density polyethylene membrane, reinforced with a polypropylene reinforcing grid. GP 2 is specifically designed and manufactured to perform as a Radon, VOC, air & Moisture protection system.
JUTA GP® Void Vent
Juta UK Ltd
JUTA GP® Void Vent is a cuspated HDPE core with a geotextile filter/separator bonded to a single side, in either 25mm or 40mm depth. The intended use of the Void Vent is to provide a means of ventilation when used in conjunction with an approved Gas Protection Barrier, in accordance with the recommendation(s) contained within NHBC Guidance and BS8485:2015 + A1 2019.
JUTA Junifol LLDPE
Juta UK Ltd
JUTA Junifol LLDPE is a linear low-density polyethylene membrane for use in accordance with harmonised standards:
BS EN 13361/ BS EN 13362/ BS EN 13491/ BS EN 13492/ BS EN 13493/ BS EN 15382
JUTA GP® Rootblock
Juta UK Ltd
JUTA GP® ROOTBLOCK is a High-Performance root blocking membrane, which is a highly effective barrier against the spread of undesirable root systems of invasive plant species.
Thanks to the smooth rigid surface of GP® ROOTBLOCK, the plants root primordia are diverted, and controlled within the given boundaries of the GP® ROOTBLOCK containment cell.
GP® ROOTBLOCK Is chemically resistant to a range of Hydrocarbons, acids and aggressive ground salts, providing a containment solution for a range of demanding applications.
JUTA GP® Titan Tape
Juta UK Ltd
JUTA GP® Titan Tape - is an extruded butyl tape designed for jointing GP® Titantech barriers and structural waterproofing barriers. The tape is double sided, with release film on both sides to assist with ease of installation. JUTA GP® Titan Tape is designed to prevent the passage of water, water vapour, air and gas, for use in building construction with waterproof membranes, vapour control layers and ground gas barriers.
JUTA GP® Sealant
Juta UK Ltd
GP® SEALANT is a novel low modulus expansion joint sealant and adhesive, especially formulated to ensure bubble free cure even at very high temperature and humidity climatic conditions. The product displays excellent thixotropy allowing its use even in very large voids.
JUTA UK GP® TITANFLEX
Juta UK Ltd
GP® TITANFLEX - Gas and Hydrocarbon Barrier is a multi layer, polyethylene membrane. GP® TITANFLEX is specifically designed and manufactured to perform as a Methane, Carbon
Dioxide, Radon, Ground Gas, VOC, air & Moisture, and Hydrocarbon protection system.
JUTA UK - Design Guidance - Gas Barriers
Juta UK Ltd
This document is aimed at providing guidance for the use of Protective measures for Ground Gas (Methane, Carbon Dioxide and
Radon), VOC, and moisture protection, for new buildings, and remediation for existing buildings. The guidance contained within is based on the most up to date standards and guidance contained within CIRA, BRE, NHBC guidance documents and BS8485:2015+A1(2019).
JUTA Self Adhesive Gas Barrier Installation Guidance
Juta UK Ltd
This document provides guidance on the installation of JUTA Self-Adhesive Membranes. It includes general installation notes, application methods and diagrams to assist with detailing of all JUTA SAM products.
JUTA GP®L
Juta UK Ltd
JUTA GP®L High Performance Hydrocarbon and Gas Barrier is a mono layer, Linear Low-density polyethylene membrane specifically designed and manufactured to perform as a robust Hydrocarbon protection system, which is suitable for use in various demanding geomembrane applications where Hydrocarbons are present. GP® L Is chemically resistant to a range of Hydrocarbons, acids and aggressive ground salts, providing a solution for a range of demanding applications.
18/5581_3 JUTA GP Titanbond
Juta UK Ltd
JUTA UK GP® Titanflex Installation Guidance
Juta UK Ltd
This document provides guidance on the installation of JUTA GP® Titanflex. It includes general installation notes, application methods and diagrams to assist with detailing of JUTA GP® Titanflex and accessory products.
JUTA GP® Titanbond - Installation Guide
Juta UK Ltd
This document provides guidance on the installation of JUTA GP® Titanbond. It includes general installation notes, application methods and diagrams to assist with detailing of GP® Titanbond and accessory products.
JUTAMAT 5000 - GCL
Juta UK Ltd
JUTAMAT 5000 Is a Mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite embedded between two layers of geotextile. Additional bentonite is added to the overlap edges for ease of sealing.
JUTA UK JUTAMAT 5000 complies with the latest codes of practice as published in LFE 3 - Using Geosynthetic Clay Liners in Landfill Engineering
JUTA GP® Tape
Juta UK Ltd
JUTA GP® Tape - is an extruded butyl tape designed for jointing JUTA Gas Barriers. The GP® Tape is double sided, with release film on both sides to assist with ease of installation. GP® Tape is designed to prevent the passage of water, water vapour, air and gas, for use in building construction with damp proof membranes, vapour control layers and ground gas barriers.
JUTA PD 1700
Juta UK Ltd
JUTA PD 1700 is a high compressive strength cuspated high density polyethylene (HDPE) drainage core with a geotextile filter bonded to one side. Protection Drainage (PD) 1700 is designed as a high flow medium to alleviate hydrostatic pressure on below ground structures as well as providing protection to underlying gas and waterproofing membranes.
GP® TITANTANK
Juta UK Ltd
GP(R) TITANTANK is a post applied self adhesive bonded waterproofing membrane which also provides exceptional resistance to ground gases (Radon, Carbon Dioxide and Methane) and VOC's.
JUTA Junifol HDPE
Juta UK Ltd
JUTA Junifol - HDPE is a High-density polyethylene membrane for use in accordance with harmonised standards:
BS EN 13361/ BS EN 13362/ BS EN 13492/ BS EN 13493/ BS EN 15382
JUTA GP® Titan Overtape
Juta UK Ltd
JUTA GP® Titan Overtape - is an adhesive fleece backed tape designed for sealing joints of JUTA GP® Titantech gas, VOC and waterproofing membranes. The GP® Titan Overtape is single sided, with release film on one side. JUTA GP® Titan Overtape is designed to prevent the passage of water, water vapour, air and gas, for use in building construction with waterproof membranes, vapour control layers and ground gas barriers. It is specifically formulated to act as a joint sealer for GP Titanbond membrane to prevent concrete influx into the joints.
JUTA PHS - Pile Head Sealer
Juta UK Ltd
JUTA UK Pile Head Sealer (PHS) is a crystalline cementitious waterproof slurry which creates a monolithic bond to the structure and seals the pile head. When mixed with clean water and applied correctly, it is designed to form a permanent waterproof coating to concrete piles in accordance with BS8102:2009.
18/5547_2 JUTA Hydrolock 2
Juta UK Ltd
20/5728_5 JUTA GP4 Radon DPM
Juta UK Ltd
18/5581_4 JUTA GP Titanlock
Juta UK Ltd
18/5581_1 JUTA GP Titanflex
Juta UK Ltd
18/5547_1 JUTA Hydrolock
Juta UK Ltd
20/5728_3 JUTA GPH
Juta UK Ltd
20/5728_6 JUTA GP2 DPM
Juta UK Ltd
Showing 1-36 of 58