Juta UK Ltd

Juta UK Ltd

Ground Gas Protection Experts - Best Products, Best Service, Best Price

+44 (0)1772 754177 www.juta.co.uk

Sort by:

Showing 37-59 of 59

JUTA GP® Vent Box & Components

JUTA GP® Vent Box & Components

Juta UK Ltd

JUTA GP® VENT BOX Is a ground level ventilation unit designed to work in combination with JUTA GP® VOID VENT products to provide passive inflow and outflow of air and ground gas. The Vent Box is a fully modular system which provides a practical and aesthetic method of venting ground gases from beneath a building, to the external atmosphere. The vent boxes are designed to be installed within the external landscaping.
JUTA GP® Void Vent

JUTA GP® Void Vent

Juta UK Ltd

JUTA GP® Void Vent is a cuspated HDPE core with a geotextile filter/separator bonded to a single side, in either 25mm or 40mm depth. The intended use of the Void Vent is to provide a means of ventilation when used in conjunction with an approved Gas Protection Barrier, in accordance with the recommendation(s) contained within NHBC Guidance and BS8485:2015 + A1 2019.
JUTA GP®1 SAM (Gas Protection - Self Adhesive Membrane)

JUTA GP®1 SAM (Gas Protection - Self Adhesive Membrane)

Juta UK Ltd

JUTA GP®1 SAM Gas Protection Self Adhesive Membrane, is a bituminous gas proof and water proof sheet, composed of self-adhesive SBS polymer modified bitumen incorporating GP®1 with an upper surface finish of Black reinforced LDPE, and a lower surface finish of siliconized release film. JUTA GP®1 SAM is used for the gas/waterproofing of underground structures where harmful ground gasses are anticipated, and as a self-adhesive accessory to GP®1.
JUTA GP®L

JUTA GP®L

Juta UK Ltd

JUTA GP®L High Performance Hydrocarbon and Gas Barrier is a mono layer, Linear Low-density polyethylene membrane specifically designed and manufactured to perform as a robust Hydrocarbon protection system, which is suitable for use in various demanding geomembrane applications where Hydrocarbons are present. GP® L Is chemically resistant to a range of Hydrocarbons, acids and aggressive ground salts, providing a solution for a range of demanding applications.
JUTA HDPE 0.6mm

JUTA HDPE 0.6mm

Juta UK Ltd

HDPE 0.6mm is a mono layer, High-density polyethylene membrane specifically designed and manufactured to perform as a robust waterproofing barrier protection system, which is suitable for use in various demanding geomembrane applications such as SUDS, Root Barrier, Waterproofing and Radon Protection and Permeable Paving. HDPE 0.6mm is a fully weldable, category 2 attenuation grade liner fully conformant to C753 and BS7533-13 and is CE marked for use in the following application areas: EN13967 (A/T).
JUTA Hydrolock

JUTA Hydrolock

Juta UK Ltd

JUTA Hydrolock - is a mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite embedded between two layers of geotextile. The internal natural sodium bentonite swells in contact with water to form a low permeability waterproofing barrier.
JUTA Hydrolock 2

JUTA Hydrolock 2

Juta UK Ltd

JUTA Hydrolock 2 - is a mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite embedded between two layers of geotextile. The internal natural sodium bentonite swells in contact with water to form a low permeability waterproofing barrier.
JUTA Junifol HDPE

JUTA Junifol HDPE

Juta UK Ltd

JUTA Junifol - HDPE is a High-density polyethylene membrane for use in accordance with harmonised standards: BS EN 13361/ BS EN 13362/ BS EN 13492/ BS EN 13493/ BS EN 15382
JUTA Junifol LLDPE

JUTA Junifol LLDPE

Juta UK Ltd

JUTA Junifol LLDPE is a linear low-density polyethylene membrane for use in accordance with harmonised standards: BS EN 13361/ BS EN 13362/ BS EN 13491/ BS EN 13492/ BS EN 13493/ BS EN 15382
JUTA PD 1700

JUTA PD 1700

Juta UK Ltd

JUTA PD 1700 is a high compressive strength cuspated high density polyethylene (HDPE) drainage core with a geotextile filter bonded to one side. Protection Drainage (PD) 1700 is designed as a high flow medium to alleviate hydrostatic pressure on below ground structures as well as providing protection to underlying gas and waterproofing membranes.
JUTA PHS - Pile Head Sealer

JUTA PHS - Pile Head Sealer

Juta UK Ltd

JUTA UK Pile Head Sealer (PHS) is a crystalline cementitious waterproof slurry which creates a monolithic bond to the structure and seals the pile head. When mixed with clean water and applied correctly, it is designed to form a permanent waterproof coating to concrete piles in accordance with BS8102:2009.
JUTA Self Adhesive Gas Barrier Installation Guidance

JUTA Self Adhesive Gas Barrier Installation Guidance

Juta UK Ltd

This document provides guidance on the installation of JUTA Self-Adhesive Membranes. It includes general installation notes, application methods and diagrams to assist with detailing of all JUTA SAM products.
JUTA UK - Design Guidance - Gas Barriers

JUTA UK - Design Guidance - Gas Barriers

Juta UK Ltd

This document is aimed at providing guidance for the use of Protective measures for Ground Gas (Methane, Carbon Dioxide and Radon), VOC, and moisture protection, for new buildings, and remediation for existing buildings. The guidance contained within is based on the most up to date standards and guidance contained within CIRA, BRE, NHBC guidance documents and BS8485:2015+A1(2019).
JUTA UK GP Void Vent & Vent Box Installation Guidance

JUTA UK GP Void Vent & Vent Box Installation Guidance

Juta UK Ltd

This document provides guidance on the installation of JUTA Void Vent, Vent Box and Accessories. It includes general installation notes, application methods and diagrams to assist with detailing of all ventilation products.
JUTA UK GP2® High Performance DPM

JUTA UK GP2® High Performance DPM

Juta UK Ltd

JUTA GP 2 Gas Barrier is a multi-layer, low-density polyethylene membrane, reinforced with a polypropylene reinforcing grid. GP 2 is specifically designed and manufactured to perform as a Radon, VOC, air & Moisture protection system.
JUTA UK GP® TITANFLEX

JUTA UK GP® TITANFLEX

Juta UK Ltd

GP® TITANFLEX - Gas and Hydrocarbon Barrier is a multi layer, polyethylene membrane. GP® TITANFLEX is specifically designed and manufactured to perform as a Methane, Carbon Dioxide, Radon, Ground Gas, VOC, air & Moisture, and Hydrocarbon protection system.
JUTA UK GP® Titanflex Installation Guidance

JUTA UK GP® Titanflex Installation Guidance

Juta UK Ltd

This document provides guidance on the installation of JUTA GP® Titanflex. It includes general installation notes, application methods and diagrams to assist with detailing of JUTA GP® Titanflex and accessory products.
JUTA UK GP®H

JUTA UK GP®H

Juta UK Ltd

JUTA GP®H High Performance SUDS, Permeable paving, Hydrocarbon and Gas Barrier is a mono layer, High-density polyethylene membrane specifically designed and manufactured to perform as a robust Hydrocarbon protection system, which is suitable for use in various demanding geomembrane applications where Hydrocarbons are present. GP® H Is chemically resistant to a range of Hydrocarbons, acids and aggressive ground salts, providing a solution for a range of demanding applications.
JUTA WP-SAM (Waterproof - Self Adhesive Membrane)

JUTA WP-SAM (Waterproof - Self Adhesive Membrane)

Juta UK Ltd

JUTA WP-SAM (Waterproof - Self Adhesive Membrane): is a bituminous water proof sheet, composed of self-adhesive SBS polymer modified bitumen with an upper surface finish of grey co-extruded polyolefin, and a lower surface finish of siliconized release paper. JUTA WP-SAM is used for the waterproofing of underground structures, and to prevent the ingress of RADON.
JUTA X20 CDM - Cavity Drain Membrane

JUTA X20 CDM - Cavity Drain Membrane

Juta UK Ltd

JUTA UK X20 CMD An 20mm thick Studded Cavity Drainage Membrane, suitable for TYPE C waterproofing in accordance with BS 8102:2009, to provide a GRADE 3 environment.
JUTA X8 CDM - Cavity Drain Membrane

JUTA X8 CDM - Cavity Drain Membrane

Juta UK Ltd

JUTA UK X8 CMD An 8mm thick Studded Cavity Drainage Membrane, suitable for TYPE C waterproofing in accordance with BS 8102:2009, to provide a GRADE 3 environment.
JUTAMAT 5000 - GCL

JUTAMAT 5000 - GCL

Juta UK Ltd

JUTAMAT 5000 Is a Mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite embedded between two layers of geotextile. Additional bentonite is added to the overlap edges for ease of sealing. JUTA UK JUTAMAT 5000 complies with the latest codes of practice as published in LFE 3 - Using Geosynthetic Clay Liners in Landfill Engineering
Premier Guarantee

Premier Guarantee

Juta UK Ltd

PG - Approval certificate

Showing 37-59 of 59