C-TEC

CT1 is the only product in the market with TRIBRID® Technology.

Made in Britain with British technology and British design, CT1 is 360% stronger with 250% more elongation than a traditional Hybrid Polymer, with unique adhesion on virtually any material in most applications without the need for additional mechanical fixings.

Product Description

With TRIBRID® Technology, CT1 is scientifically proven to have excellent colour retention – white stays white.

There are 10 colour options.

Use Internally or externally with complete peace of mind.

For indoor and outdoor use:

1. White.
2. Grey.
3. Black.
4. Anthracite.
5. Beige.
6. Brown.
7. Oak.
8. Blue (ideal colour for clinical environments).

For predominantly indoor use only:

1. Clear.
2. Silver.

CT1 provides unique adhesion on virtually any material in most applications without the need for additional fixings.

It will successfully bond:

• All metals (including lead).
• Glass.
• Mirrors.
• All woods.
• MDF.
• Polystyrene.
• Fiberglass.
• Tiles.
• Concrete.
• Most stones (without staining).
• Most synthetic materials.
• Plastics (excluding PP, PE and PTFE).

CT1 is the ultimate solution for sealing and bonding:

• Excellent colour retention.
• Excellent adhesion - 22kg per cm2 when fully cured.
• Solvents and isocyanates free.
• Non Toxic.
• Excellent resistance to chemicals.
• Environmentally compliant:
• Accredited by NAAF – Norwegian Asthma and Allergy Association.
• EC1 Plus Certified A+ Indoor Air Comfort GOLD®.
• ISEGA Certified – Conforms to Food Preparation Standards.
• Moderate resistance to fungal and bacteria growth (For ultimate mould and fungal resistance to growth use BT1).
• UV resistant.
• Vibration resistant.
• Unique flexibility.
• Works in wet or dry conditions, even under water (including salt-water environments):
• Perfect for:
• Marine applications.
• Boating maintenance.
• Accident and emergency repairs.
• Instant repair and bonding with fibreglass and carbon fibre materials.
• Odourless.
• Does not shrink.
• Does not crack.
• Does not peel.
• Can be painted over – please see product information sheet.

How is CT1 Supplied?

CT1 is supplied in a 290mm cartridge.

How to prepare CT1 for use!

To prepare your CT1 for application, you need to;

• Remove the nozzle at the top of the cartridge and cut the cap off (at the top of the thread section) using a sharp utility knife.
• Cut the nozzle correct size using a sharp utility knife. This will determine the size of your bead. Make sure to do it at a 45-degree angle.

How to apply CT1 sealant and adhesive!

With the CT1 cartridge open and the nozzle cut to suit the bead of sealant needed applying CT1 sealant and adhesive is very straightforward.

Simply;

• Load the prepared cartridge into your caulking gun securely.
• Squeeze down on the trigger to start applying CT1.
• Apply CT1 sealant evenly in a straight line, using consistent pressure to the trigger as you drag the nozzle along your desired application area.

Once you’ve applied your bead of CT1 along your desired area, use CTEC Multisolve to lightly coat the sealant and press into the groove with the appropriate tooling equipment.

How long does it take to cure?

Curing times:

CT1 works instantly and is fully cured in:

• 24 hours – 3mm bead
• 48 hours – 6mm bead
• 72 hours – 9mm bead

Note: Depending on how thick your application of sealant, you may have to wait longer before it’s fully cured.

What other products does CTEC offer?

CTEC also supplies a number of other products:

BT1 - We have created a unique product based on our revolutionary TRIBRID® Technology upon which bacteria/microbes cannot survive, making it easier to maintain a more hygienic surface which is free of solvents and isocyanates.

Power Grab & Bond - The revolutionary development in heavy duty vertical bonding. Based on our CT1 unique sealant and construction adhesive formulation there is absolutely no need for any additional mechanical fixings as it was initially developed for facade bonding.

Multisolve – Successfully removes old Silicone, adhesives, wax paraffin, printing ink, oil, bitumen, grease and more without damaging base timber, metal, plastics, glass etc. Does not irritate skin.

Miracle Seal - Permanently seals small leaks anywhere in the cooling system including radiators, hose pipes and water pumps. Can even seal hairline cracks in an engine!

Superfast Plus - A one component adhesive which bonds in seconds and has a special formula based on Cyanacrylate. Superfast Plus does not contain solvent and consists mainly of Ethyl Cyanacrylate Monomer.

Peel Tec – Removes paint from metal, wood, stone, brickwork and concrete without damaging the base product. Can be used to remove graffiti.