Super Fast Plus - Superglue - A single-component fast bond adhesive.

SUPERFAST PLUS provides an exceptionally strong bond between almost all kinds of materials, with the exception of polyethylene (PE), polypropylene (PP) and fluorine containing plastic materials (PTFE).

Non Porous Materials which can be bonded with Superfast PLUS include:

• ABS.
• Aluminium.
• Bakelite.
• Bronze.
• Butyl.
• Celluloid.
• Chloroprene.
• Chrome.
• Copper.
• Delrin.
• Glass.
• Natural rubber.
• NBR.
• Neoprene.
• Nitrile.
• Nylon.
• Phenol.
• Polycarbonate.
• Polystyrene.
• Porcelain.
• Hard PVC.
• Stainless steel.
• Steel.

Porous Materials which can be bonded with Superfast PLUS when used in Conjunction with Superfast DMPT FREE Activator include:

• Woods including MDF
• Stone
• Brick
• Concrete

Materials not suitable for use with Super Fast Plus:

• Polyethylene (PE).
• Polypropylene (PP).
• Plastic Materials containing Fluorine (PTFE).

How to use Superfast PLUS Glue:

To use Superfast PLUS simply apply product to each surface and immediately press together for approximately 10-15 seconds (at a moderate 20°C) to achieve a bonding strength between 5 to 28 N/mm² (depending on the materials being adhered).

Using on porous surfaces?

When bonding porous materials, such as wood and stone, use in conjunction with SUPERFAST PLUS DMPT FREE Activator. The DMPT FREE Activator is pre-applied to all porous surfaces in advance of Superfast PLUS adhesive.

Once applied then put Superfast PLUS Glue on one surface and press them firmly together for 10-15 seconds.