NBS Source
List your products

Britmet Lightweight Roofing

+44 (0)1295 250998 www.britmet.co.uk

Sort by:

Showing 1-18 of 18

Boldroll

A lightweight Boldroll Profile eave to ridge tile effect sheet system, available in 6 different colours, 0.9 m gauge steel with a cover width of 760 mm. This means the Boldroll eave to ridge sheet gives great speed of installation.

Boldroll can be installed as low as 5-90 degrees, fixed at 1.2 to 1.5 m centres using colour coated tech fasteners with a full and extensive range of flashings and accessories.

Boldroll is fully dry fixed with the highest level of anti-vandal resistance available in the market place today, it is perfect for schools, community centres, pavilions, flat to pitch conversions and low pitch roofs such as garages to name a few.

A British manufactured producing great British profiles for the UK market.

Boldroll - P Ridge-Hip Flashing

For sealing the top and side courses of tiles.

For projects with a hip and dual pitch and compatible with the Britmet Boldroll profile.

Manufactured to the highest standards. With a length of 2 m the Boldroll ridge and hip flashing are dry fixed and extremely fast to install.

Manufactured to the highest standards.

Britframe - Full Spanning Truss

Pre-manufactured lightweight metal trusses designed to span from load bearing wall to load bearing wall.

Manufactured to suit all roof scopes, sizes and profiles.

Britframe - Post And Rail

A lightweight metal over roof system that is fixed directly into the existing roof deck.

Manufactured to suit all roof scopes, sizes and profiles.

Britframe - Propped Frame

A lightweight metal flat to pitch over roof system designed to transfer the loads via the existing deck, directly in to existing structural supports.

Manufactured to suit all roof scopes, sizes and profiles.

Pantile 2000

A lightweight pantile profile, eave to ridge tile effect sheet system available in six colours and manufactured in 0.9 mm gauge steel for the highest level of anti-vandalism available roofing in the market.

With a cover width of 1040 mm the pantile 2000 gives the fastest speed of installation of any tile effect products. It can be laid as low as 5 degrees right the way through to 90 degrees.

It can be fixed at 1.2 to 1.5 m centres using colour coated tech fasteners with an extensive range of flashings and accessories in 6 different colours.

Pantile 2000 is great for schools, community centres, pavilions, garages and many more. A British manufacturer producing great British profiles for the UK market

Pantile 2000 - P Ridge-Hip Flashing

For sealing the top and side courses of tiles. For projects with a hip and dual pitch and compatible with the Britmet Pantile 2000 profile.

Manufactured to the highest standards. With a length of 2 m the Pantile 2000 ridge and hip flashing are dry fixed and extremely fast to install.

Plaintile

A lightweight metal tile effect panel system designed to give a plaintile profile. For the use on conventional steel of timber structures as well as vertical cladding, with a low pitch of 15 to 90 degrees.

The Britmet plaintile profile gives you a true broken bond plaintile appearance and offers incredible value and superior performance to traditional plaintile products.

The lightweight steel plaintile, broken bond profile, gives the client unmatched vandal and weather resistance, made in two thicknesses 0.45 mm 0.9 mm (anti-vandal)in a range of 6 granulated colours and is a British manufactured product. Each panel covers 0.2 of a m2 making plaintile 10 x faster to fit and 10 x lighter at only 8 kg per m2

Plaintile - P Ridge-Hip Flashing

For sealing the top and side courses of tiles.

For projects with a hip and dual pitch and compatible with the Britmet plaintile profile. Manufactured to the highest standards. With a length of 1.25 m the plaintile ridge and hip flashing are dry fixed and extremely fast to install.

Profile 49

A British manufactured lightweight metal roof tile designed to give a square profile 49 finish.

Ideal for use on a conventional steel or timber structures with a minimum pitch of 10 - 90 degrees.

This lightweight steel panel system overs 0.48 m2 per panel and is manufactured in two different thicknesses, 0.45 mm and 0.9 mm (anti-vandal) it only weighs 7 kg per m2 for 0.45 mm and 11 kgm2 for our heavy duty anti-vandal 0.9 mm version, ideal for areas of vandal concern and high foot traffic.

Available in a range of six granulated finishes and 6 chic (smooth) finishes

Profile 49 - P Ridge-Hip Flashing

For sealing the top and side courses of tiles. For projects with a hip and dual pitch and compatible with the Britmet Profile 49 profile. Manufactured to the highest standards.

With a length of 1.25 m the Profile 49 ridge and hip flashing are dry fixed and extremely fast to install.

Slate 2000

For sealing the top and side courses of tiles. For projects with a hip and dual pitch and compatible with the Britmet Slate 2000 profile. Manufactured to the highest standards.

With a length of 1.25 m the Slate 2000 ridge and hip flashing are dry fixed and extremely fast to install.

Slate 2000 - P Ridge-Hip Flashing

For sealing the top and side courses of tiles. For projects with a hip and dual pitch and compatible with the Britmet Slate 2000 profile. Manufactured to the highest standards.

With a length of 1.25 m the Slate 2000 ridge and hip flashing are dry fixed and extremely fast to install.

Tactray 90

Tactray 90 is a structural metal tray system which replaces timber rafters. Each tray side laps its neighbour to form a unique air sealed system running from eave to ridge fixed directly to the purling’s.

The lightweight and structural strength of the Tactray 90 gives unrivalled spanning performance and is ideal for a variety of roof coverings from lightweight metal roof panels to heavy concrete tiles.

Tactray 90 is available in a range of thicknesses from .75 mm to 1.5 mm, a range of colours and can be perforated for acoustic performance needs.

Ultratile

A Lightweight steel tile panel system which is designed to give a pantile profile, for the use on conventional steel or timber roof structures with a minimum low pitch of 10 - 90 degrees.

Available in two thicknesses, 0.45 mm and 0.9 mm (anti-vandal) from high grade aluzinc or pre-coated galvanised steel in a range of six granulated finishes and six chic (smooth) finishes.

Each tile covers 0.46 m2 and weighs only 7.2 kgm2 for the 0.45 mm steel tile and 10.8 kgm2 for the 0.9 mm metal tile. The 0.9 mm metal panel gives added security and safety for applications that may require heavy foot traffic and protection from vandalism.

British manufactures to suit UK roof profiles.

Ultratile - P Ridge-Hip Flashing

For sealing the top and side courses of tiles. For projects with a hip and dual pitch and compatible with the Britmet Ultratile profile. Manufactured to the highest standards.

With a length of 1.25 m the Ultratile ridge and hip flashing are dry fixed and extremely fast to install.

Villatile

Designed to give the appearance of a roman tile, our lightweight metal panel is well suited for conventional timber or steel structures.

This British manufactured profile is perfect for any low pitch projects with a minimum pitch of 10 - 90 degrees.

This lightweight steel panel only weighs 7 kg for our .45 mm panel and 11 kg for our anti-vandal 0.9 mm thickness, ideal for areas of security and vandal concerns or even high foot traffic.

Available in two different finish, granulated and chic (smooth powder coat) and in 6 different colours all designed to suit the uk roof profiles.

Villatile - P Ridge-Hip Flashing

For sealing the top and side courses of tiles. For projects with a hip and dual pitch and compatible with the Britmet Villatile profile.

Manufactured to the highest standards. With a length of 1.25 m the Villatile ridge and hip flashing are dry fixed and extremely fast to install.

Showing 1-18 of 18