Ventilation and ducting
Ventilation includes a range of ventilator requirements such as roof ventilators, wall grilles, extract hoods, etc. Browse products for Ventilation and ducting below.
Can't find what you're looking for?
Recently verified
Showing 37-72 of 310
AIRTRAK® RTV Ridge Tile Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides ventilation of most ridge tiles using traditional wet laid methods.
AIRTRAK® PRV Pitched Roof Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides point ventilation to lead roofs and vertical cladding where appropriate.
AIRTRAK® EA Eaves Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
A range of profiles that provide a 25 mm ventilation path into the roof void at the eaves or edge of a flat roof.
AIRTRAK® PE Pitched Eaves Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides an unobtrusive ventilation path into the roof void at the bottom of a pitched roof slope.
AIRTRAK® AB3 Abutment Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Abutment ventilator for mastic asphalt (vertical kerb).
AIRTRAK® EC Eaves Carrier - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Support profile to prevent ponding at eaves caused by a backfall in the roof underlay membrane.
AIRTRAK® IL Inline Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Inline ventilators for use at the foot or head of vertical or pitched cladding to provide a continuous airgap for ventilation.
AIRTRAK® CP Change of Pitch Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides ventilation at the change of pitch in a slated or tiled mansard roof.
AIRTRAK® MV Mansard Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Range of mansard ventilators for slate and tile roofing is used to introduce ventilation into a flat roof where it falls out onto a pitched roof.
AIRTRAK® VA Ventilated Apron - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Introduces ventilation at the head of slated or tiled pitch where the roof meets an abutment wall.
AIRTRAK® AB6 Abutment Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Ventilator for use at a parapet wall abutment.
ROOFPORT® RPV - Roof Void Point Ventilators
Verified 13 days ago
Nicholson STS Ltd
Roof void point ventilators with an integral fly screen mesh, and a ventilation area of 15 000 or 30 000 mm².
AIRTRAK® LB Layboard Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Range of ventilators providing 25 mm ventilation over the layboard into the roof void.
AIRTRAK® CL Cladding Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides ventilation into metal cladding from 60° pitch to vertical.
AIRTRAK® AB4 Abutment Ventilator - Stainless steel linear ventilator
Verified 13 days ago
Nicholson STS Ltd
Abutment ventilator for mastic asphalt (splayed kerb).
AIRTRAK® F10/ F25 Fascia Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Provides ventilation to the roof void over the eaves fascia board.
AIRTRAK® VR Ventilated Ridge - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Introduces ventilation at the head of slated or tiled pitch where it reaches the ridge.
AIRTRAK® AB5 Abutment Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Abutment ventilator for hard metal roofing.
AIRTRAK® AB1 Abutment Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Abutment ventilator for fully supported metal, membrane and liquid applied roofing.
AIRTRAK® LV Lead Roof Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Range of compact point ventilators for flat or pitched lead covered roofs up to 30°.
AIRTRAK® SLV Slate Ventilator - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Low profile roof ventilator.
AIRTRAK® BRV Between Roll Ventilators - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Range of between-roll ventilators for lead ridge details.
AIRTRAK® CS Comb Strip - Roof Ventilation System
Verified 13 days ago
Nicholson STS Ltd
Comb strip designed to prevent the entry of birds and vermin into the batten void beneath profiled tiles at the eaves.
Telescopic Underfloor Vents
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
Telescopic underfloor vents are used to create a clear airflow channel into voids below suspended timber and block and beam floors.
Circular Soffit Vents
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
Disk shaped soffit vents. They can be fitted before or after the installation of the soffit boards to ventilate the roof space.
Bird Comb Filler
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
Eaves comb filler to prevent against bird and vermin infestation.
Over Fascia Vents - Eaves Level Ventilation
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
Over fascia ventilators provide air flow into the roof space.
Felt Support Tray - Eaves Level Ventilation
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
High-quality PVC eaves trays that protect the roofing felt from intense weather and temperature conditions.
Cavity Sleeves
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
Cavity sleeves are used in conjunction with brick vents and are used to provide ventilation through a standard cavity or solid brick walls.
Continuous Rafter Tray - Eaves Level Ventilation
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
Rafter roll-out tray used to maintain ventilation paths at the eaves and provide a barrier between the underlay and the roof felt.
2 in 1 Felt Support Tray - Eaves Level Ventilation
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
High-quality, 1 metre eaves support trays with an integrated 10mm over fascia vent.
3 in 1 Felt Support Tray
Verified 24 days ago
Easy-Trim Roofing and Construction Products Ltd
A PVC felt support tray that incorporates an over fascia ventilator and bird comb filler.
Louvre and Invisivent: Integrated Unit for Inlet and Mechanical Extract - Integrated Ventilation Solutions
Verified 1 month ago
Renson Fabrications Ltd
A combined inlet and extract unit with acoustic inlet ventilator and extract duct spigot.
Over Fascia Ventilator
Verified 1 month ago
Eurocell plc
Over-fascia ventilators are an effective way to ventilate your roof space.
Passivent Thermal Hybrid Aircool® - Wall/ Window Ventilator with Heater
Verified 1 month ago
BPD Building Product Design Ltd
Thermal Hybrid Aircool® ventilator (without external weather louvre) with a restyled room-side ventilation outlet that incorporates an inline Low Temperature Hot Water (LTHW) heater unit.
RyMar® IM Vent Pipe Cover
Verified 1 month ago
Fixfast Ltd
Vent pipe cover - insertion model.
Showing 37-72 of 310