Roofing
Roofing covers the various roof coverings, including unit roofing and membrane roof materials. Browse products for Roofing below.
Can't find what you're looking for?
Recently verified
Showing 793-828 of 838
PRX-RS-02
Verified over a year ago
Firth Steels Ltd
Protex® roof system.
PRX-RS-01 - Built-up Roof System
Verified over a year ago
Firth Steels Ltd
Protex roof system.
Preprufe® 160R Plus
Verified over a year ago
GCP Applied Technologies
Waterproof membrane composite sheets.
Preprufe® 800 PA
Verified over a year ago
GCP Applied Technologies
Self-adhesive membrane for basement walls in open excavations.
BITUTHENE® GP
Verified over a year ago
GCP Applied Technologies
Self-adhesive rubber bitumen/HDPE waterproof membrane for low risk applications.
BITUTHENE® 8000 HC
Verified over a year ago
GCP Applied Technologies
Advanced self-adhesive, solar reflective, flexible water and vapour proof membrane.
Bitushield™
Verified over a year ago
GCP Applied Technologies
Self-adhesive waterproofing sheet membrane finished with mineralized felt for exposed waterproofing detailing.
SERVIPAK® 3
Verified over a year ago
GCP Applied Technologies
A 3 mm thick lightweight protection board.
Grace Ice and Water Shield®
Verified over a year ago
GCP Applied Technologies
Roofing underlay.
Xtra-Load GRM
Verified over a year ago
BMI Group UK Ltd
Self adhesive, cold applied flexible sheet gas retardant membrane.
Xtra-Load Diamond
Verified over a year ago
BMI Group UK Ltd
A high performance, flexible, self adhesive membrane.
Vapourbar Vapour Control Layer
Verified over a year ago
BMI Group UK Ltd
A high performance, glass reinforced, metal-lined bituminous vapour control layer, applied using ‘pour-and-roll’ techniques.Vapourbar is suitable for use on all types of deck, such as timber, profiled metal, and cementitious substrates, as well as suitable existing bitumen and asphalt roofs.
Total Torch Warm Deck Roofing System
Verified over a year ago
BMI Group UK Ltd
Two or three layer system incorporating a range of SBS-modified elastomeric bitumen membranes with a high strength polyester carrier; vapour control layers, insulation and accessories.Total Torch membranes incorporate a special striped pattern. This advanced vapour release technology has been specially designed to dissipate any moisture vapour that may be trapped in the roofing system. When this trapped moisture begins to warm up it can form pressure pockets within the system. The Total Torch Vapour Dispersion Layer and the Total Torch Vapour Control Layer have been specially engineered to neutralize this potential problem. Once the Total Torch Vapour Control layer has been bonded to the substrate, heat is applied to its specially designed stripes onto which the insulation is fixed. Only Thermazone Torch-on insulation is approved for use within the Total Torch system, as its superior facings and dimensionally stable insulant are ideal for this form of installation.
Total Torch Vapour Dispersion Layer
Verified over a year ago
BMI Group UK Ltd
Vapour dispersion layer.
Total Torch Vapour Control Layer
Verified over a year ago
BMI Group UK Ltd
Vapour control layer.
Total Torch Inverted Warm Deck Roofing System
Verified over a year ago
BMI Group UK Ltd
Two-layer inverted warm deck roofing system.
Total Torch Inverted Cold Deck Roofing System
Verified over a year ago
BMI Group UK Ltd
Two-layer, cold deck roofing system.
TorchSafe T.A. VCL - Stripes Vapour Control Layer
Verified over a year ago
BMI Group UK Ltd
A high performance vapour control layer with a heat-activated self-adhesive underside, and an aluminium/ PET core. The upper surface has special resinous bitumen stripes which are activated by torch heating to receive and adhere the insulation board.TorchSafe T.A. VCL - Stripesis suitable for use on all types of deck, such as timber, profiled metal, and cementitious substrates.Substrates should be primed prior to the application of the membrane using Icopal S.A. Primer.
TorchSafe T.A. VCL - Stripes
Verified over a year ago
BMI Group UK Ltd
Glass-reinforced SBS modified bitumen membrane.
TorchSafe T.A. VCL - Sand
Verified over a year ago
BMI Group UK Ltd
A heat-activated self-adhesive vapour control layer with aluminium/ PET core. The membrane is suitable for use where the insulation is to be adhered to the vcl with insulation adhesive. The upper surface is finished with a plain sand coating.TorchSafe T.A. VCL - Sandis suitable for use on all types of deck, such as timber, profiled metal, and cementitious substrates.Substrates should be primed prior to the application of the membrane using Icopal S.A. Primer.
ThermoSolo Roofing System
Verified over a year ago
BMI Group UK Ltd
Single layer reinforced bitumen membrane roof covering.
Reflex 275 Vapour Control Layer
Verified over a year ago
BMI Group UK Ltd
A multi-layer vapour control layer made from virgin polyethylene with reinforcing grid and aluminium layer giving exceptionally high vapour resistance. The high resistance of the Reflex 275 makes it suitable for use within buildings with higher levels of humidity, such as swimming pools, sports halls and kitchens. It is a loose-laid membrane and therefore intended for use within mechanically fastened warm roof waterproofing systems. Joints should be sealed with Monobond LT sealant tape.
Profiles XL Warm System
Verified over a year ago
BMI Group UK Ltd
A two layer high performance SBS modified bitumen torch-on flat roofing system.
Thermaweld FireSmart Mineral
Verified over a year ago
BMI Group UK Ltd
Reinforced bitumen roof waterproofing system.
Tecnatorch® Sand
Verified over a year ago
BMI Group UK Ltd
Roof waterproofing capsheet.
Profiles XL Inverted Warm System
Verified over a year ago
BMI Group UK Ltd
A two-layer, high-performance, SBS-modified bitumen, torch-on flat roofing system.
Profiles XL Cold Deck System
Verified over a year ago
BMI Group UK Ltd
A two-layer, high-performance, SBS-modified bitumen, torch-on flat roofing system.
Profiles Vapour-Vent XL
Verified over a year ago
BMI Group UK Ltd
As part of the Profiles high performance roofing system, the Profiles Vapour-Vent XL membrane is a SBS-modified aluminium/ PET lined bitumen membrane applied by ‘torch-on’ application. It has with resinous bitumen stripes on the upper surface which are activated by torch-heating to receive and adhere the insulation board.Profiles Vapour-Vent XL is suitable for direct application to non-combustible substrates, such as profiled metal, and cementitious substrates, as well as suitable existing bitumen and asphalt roofs. The Profiles system is available to IMA approved roofing contractors only.
Profiles T.A. Warm Roofing System
Verified over a year ago
BMI Group UK Ltd
A two-layer high performance SBS modified bitumen thermically activated flat roofing system.
Profiles T.A. Cold Roofing System
Verified over a year ago
BMI Group UK Ltd
A two-layer, high-performance styrene butadiene styrene (SBS)-modified, bitumen, thermically activated flat roofing system.
Monarplan PVC Warm Deck Roofing System
Verified over a year ago
BMI Group UK Ltd
Monarplan is a flexible PVC-P single ply membrane offering excellent characteristics of strength, elongation and weathering making it ideal for new build or refurbishment projects.All membranes are reinforced and are available with or without a fleece backing providing scope for all methods of application and offering specifiers confidence in performance and unlimited freedom in design.Mechanically Fastened System:Monarplan FM systems rely on the use of fasteners and pressure plates installed at pre-determined centres within the overlap to attach the roofing system to the structure. The system offers fast application time, instant seam strength and reduced impact associated with inclement weather conditions. Monarplan FM membrane is mechanically attached through to the structural deck using Monarplan Tubular Fasteners of appropriate length. The fasteners are required to penetrate through the structural deck with a minimum projection to the underside of 25 mm.Fully Adhered System:Monarplan GF Fleecebacked membrane offers an ideal solution on very complex building shapes or where drilling and mechanical fasteners are inappropriate or impractical.Warm Ballasted System:Monarplan G membrane offers an ideal solution on very complex building shapes or where drilling and mechanical fasteners are inappropriate or impractical, and is fast to installation but can support the increased loading from the ballast material.Components:Primer.Vapour control layer.Insulation.Waterproof membrane.
Profiles Solo Roofing System
Verified over a year ago
BMI Group UK Ltd
Single layer reinforced bitumen membrane warm deck roof covering.
Monarplan PVC Inverted Roofing System
Verified over a year ago
BMI Group UK Ltd
Single layer roof covering for very complex building shapes or where drilling and mechanical fasteners are inappropriate or impractical, and is fast to install but can support the increased loading from the ballast material.
Monarplan Cold Deck Roofing System
Verified over a year ago
BMI Group UK Ltd
Monarplan is a flexible PVC-P single ply membrane offering excellent characteristics of strength, elongation and weathering making it ideal for new build or refurbishment projects.All membranes are reinforced and are available with or without a fleece backing providing scope for all methods of application and offering specifiers confidence in performance and unlimited freedom in design.Mechanically Fastened System:Monarplan FM systems rely on the use of fasteners and pressure plates installed at pre-determined centres within the overlap to attach the roofing system to the structure. The system offers fast application time, instant seam strength and reduced impact associated with inclement weather conditions. Monarplan FM membrane is mechanically attached through to the structural deck using Monarplan Tubular Fasteners of appropriate length. The fasteners are required to penetrate through the structural deck with a minimum projection to the underside of 25 mm.Fully Adhered System:Monarplan GF Fleecebacked membrane offers an ideal solution on very complex building shapes or where drilling and mechanical fasteners are inappropriate or impractical.Warm Ballasted System:Monarplan G membrane offers an ideal solution on very complex building shapes or where drilling and mechanical fasteners are inappropriate or impractical, and is fast to installation but can support the increased loading from the ballast material.
Parabit Solo System
Verified over a year ago
BMI Group UK Ltd
Hot melt roof waterproofing system.
Nubit
Verified over a year ago
BMI Group UK Ltd
High performance bitumen membrane with high strength base.
Showing 793-828 of 838