Roofing
Roofing covers the various roof coverings, including unit roofing and membrane roof materials. Browse products for Roofing below.
Can't find what you're looking for?
Recently verified
Showing 865-881 of 881
ExtraLight Tile Kit - Lightweight Roof Tiles
Verified 10 months ago
Supalite Tiled Roof Systems Ltd
Lightweight roof tiling kit; a complete range of accessories to complete a roof.
Tapco - Lightweight Synthetic Slate Kit
Verified 10 months ago
Supalite Tiled Roof Systems Ltd
TapcoSlate ClassicFeatures and benefits:Authentically shaped with textured surfaces and riven edges moulded from authentic slates.Will not crack, break or delaminate.Manufactured from recyclable virgin limestone and polypropylene.Pitch: 12–70°.Lightweight; as low as 12 kg/m².Easy to install with pre-marked nailing and exposure guides and spacers.Easily cut with a fine-toothed saw or sharp utility blade.Built-in camber for tighter fit when fixed in situ.No sorting, clipping, or drilling prior to roof loading.Fittings (ridges and hips) are mechanically fixed.Choice of colours (seven standard colours and one mix).Fully tested to BBA, UKTA and ETA standards, and has UKCA and CE marking, including fire rating, wind, driven snow & rain, and water absorption.
Sikaplan® SGmA Single Ply Membrane (Warm Roof System with Sika® Green Roof)
Verified 1 year ago
Sika Limited
Green roof system based around the Sikaplan® SGmA membrane.
Sika® Liquid Applied Membrane (Warm Roof System with Sikalastic® -625 BMS)
Verified 1 year ago
Sika Limited
High performance reduced CO2 footprint polyurethane liquid applied waterproofing.
EshaFlex 370 FireSafe
Verified 1 year ago
Radmat Building Products Ltd
Cap sheet with a fire protection top layer for EshaFlex exposed flat roofing systems, providing a zero spread-of-flame risk and eliminating the potential for fire penetration.
Bauderflex Green Roof System Reinforced Bitumen Membrane Inverted Roof Covering System Self-Adhered (with Torch-On Capping Sheet)
Verified over a year ago
Bauder Ltd
Two-layer, self-adhered, inverted roof bitumen membrane waterproofing system suitable for new build and refurbishment applications, incorporating torch-on bitumen root resistant capping sheet.
Power Elastomeric 250 Sand
Verified over a year ago
BMI Group UK Ltd
A two or three layer torch-on, SBS modified elastomer bitumen roofing system.
Evolight - Roofing membrane
Verified over a year ago
Mapei (UK) Ltd
Polyester based torch-on waterproofing membrane.
Polyvap
Verified over a year ago
Mapei (UK) Ltd
High performance vapour control layers.
Polyshield
Verified over a year ago
Mapei (UK) Ltd
High performance polyester based polymer modified torch-on cap sheet.
Plana V
Verified over a year ago
Mapei (UK) Ltd
Glass fibre based polymer modified torch-on underlay.
Plana P
Verified over a year ago
Mapei (UK) Ltd
Polyester based polymer modified torch-on cap sheet.
Modibond
Verified over a year ago
Mapei (UK) Ltd
Polyester based polymer modified torch-on cap sheet.
Elastobond
Verified over a year ago
Mapei (UK) Ltd
Bituminous roofing waterproofing membrane.
ThermoSolo Roofing System
Verified over a year ago
BMI Group UK Ltd
Single layer reinforced bitumen membrane roof covering.
Reflex 275 Vapour Control Layer
Verified over a year ago
BMI Group UK Ltd
A multi-layer vapour control layer made from virgin polyethylene with reinforcing grid and aluminium layer giving exceptionally high vapour resistance. The high resistance of the Reflex 275 makes it suitable for use within buildings with higher levels of humidity, such as swimming pools, sports halls and kitchens. It is a loose-laid membrane and therefore intended for use within mechanically fastened warm roof waterproofing systems. Joints should be sealed with Monobond LT sealant tape.
Monofilament 250 Vapour Control Layer
Verified over a year ago
BMI Group UK Ltd
Monofilament 250 is constructed using a three layered membrane combination and incorporates a high density polyethylene reinforcement grid which ensures high tensile strength and excellent water vapour resistance.It is for use within buildings with low to medium levels of humidity. It is a loose-laid membrane and therefore intended for use within mechanically fastened warm roof waterproofing systems. Joints should be sealed with Monobond LT sealant tape.
Showing 865-881 of 881