"construction plant equipment"

One of the largest self-supporting display greenhouses in the world Following the renovation of the Grand Pavilion (das Große Tropenhaus, first built in 1906) at Berlin’s Botanical Garden, daylight enters through hundreds of small, heat-insulating yet highly light-permeable glass panes onto one of the world’s most significant collections of rare and endangered tropical plants. The inner panels used in the double-glazing for the overhead sections of the pavilion are made of laminated safety glass using stiff and strong SentryGlas® ionoplast interlayers. For the first time in Germany – following its “special approval” – a special “UV-transmissible” grade of SentryGlas® is used for this application, thereby sustaining the active growth of the plants and safeguarding their preservation

The living wall at the new Postal Museum in London demonstrates ground-breaking living wall technology with the integration of 5 post boxes within a 21m × 3m elevation consisting of 3,468 plants in the freestanding vertical garden structure.

Tropical plants swaying gently in a light breeze – it’s a vision of paradise you would hardly expect to find in a health centre. But in the multicultural district of Bergsjön, outside Gothenburg, this is exactly what greets patients at the newly built health centre.

800 square meters of Black Webnet creating an innovative Webnet Green Wall ,providing shade and year-round temperature control for this contemporary office building.The innovative design features our Webnet stainless steel mesh system suspended from roof supports to create a strong, secure and long-life structure for plants to climb up. Planters at first floor level encircle the building to provide low level greening, as well as a base for the climbers.Bringing nature to this urban landscape, the green wall not only makes the office look spectacular, but also provides a habitat for wildlife and significantly improves the building’s carbon footprint. The shade and evaporative cooling of the plants also help to cool the building in summer and insulate it in winter, helping to improve thermal efficiency and save energy costs.

Helmsman System 2000 lockers 3 compartment with plant on doors are supplied and fitted at the Health Club. Helmsman System 3206 Seating are in use also to match the lockers. Helmsman System 3208 Hook Bar is also fitted to match the lockers.

Biotecture recently completed this internal living wall at Legal and General's new flagship HQ in The Interchange, Cardiff. The green wall was installed using Biotecture’s naturally resilient hydroponic system and the planting design includes the icon Legal and General umbrella.

Almost four years on we look back at a distinctive Manchester tram stop within a landscaped park setting that boasts a ‘living wall’ of plants and wildflowers surrounded by extensive landscaping, offering a calm and peaceful environment for passengers who are waiting for the tram.

When Wm Morrison Supermarketsbegan their multi-million pound ‘Back toBest’ investment programme to upgradetheir entire food manufacturing plant,they chose Whittan to deliver 1,500 high quality,hygienic lockers for the securestorage of personal belongings andvaluables.

Mead Johnson is a world leader in infant nutrition, with more than 70 products in over 50 countries. Their new US$325 million facility in Singapore includes a state of the art manufacturing plant, research and development centre and a new regional office.

The buildings around Clerkenwell Green in London feature a mixture of architectural styles. The area is designated a Conservation Area and some properties are listed. During the nineteenth century it was a busy centre for specialised crafts and manufacture and the buildings at No 10-11 were originally constructed as warehouses.The Uniform Clothing & Equipment Company (Uniquip) occupied the two buildings from around 1910 to the 1990s and was a well known supplier of band uniforms.Stagg Architects obtained planning permission to refurbish and extend the original 13,000 sq ft building by an additional 7,000 sq ft. The renovated building comprises a new roof extension, flexible spaces on the ground and lower ground floors and offices at the upper levels.A four storey side extension infill was constructed and Clement Windows Group were selected to manufacture the new and replacement steel windows and doors throughout the building. It was very important that the new windows were in keeping with the original building and did not detract from the character and appearance of the surrounding Conservation Area and adjoining Listed Buildings.Windows and doors from the Clement EB20 steel window range were chosen and powder paint coated in black with the accompanying hinges and handles painted to match the frames. The huge wall of steel windows to the side of building includes a patterned glass which allows light to enter while also providing privacy for the neighbouring properties.Photographs taken by Matt Chisnall, @mattchisnall

FlexEJ partners with its sister-company Safetech to design and fabricate specialist large diameter rubber expansion joints.Typically, particularly in the Gulf States, these are used in water treatment, distribution and desalination plants – and it’s these processes that took contingents from our sales and management teams to the UAE recently to see our product installed and operating.Desalination and water distribution in the UAE and surrounding countries are vital, integral components helping to supporting these oil-rich economies, thriving as they do in a desert region.The teams flew into Dubai to meet with our local representatives Parvez Mohiuddin and Mansoor Pullat and find out a little more about how the potable water supply operates in this thirsty city. Plants all over this region are in a continual process of refurbishment; the team were able to see how rubber expansion joints of various sizes had been replaced with high quality Safetech joints during a recent plant upgrade.We have an ongoing and growing commitment to the Gulf region and various projects underway there. Building relationships and developing understanding in the field are very much how we like to do business in both Safetech and FlexEJ so this was an ideal opportunity to share information and make plans.If you are interested in finding out more about FlexEJ’s large and custom-engineered rubber expansion joints, please contact our Technical Sales Team on +44 (0) 1384 881188 or send an email to sales@flexej.co.uk.

A wide range of high quality outdoor furniture, play equipment and cycle parking products from Broxap Street Furniture complement the landscape at Kingsbrook View Primary Academy.

Bender UK delivers critical power supply solutions and equip four state-of-the-art theatres at the new £100 million The Harborne Hospital, part of HCA Healthcare UK.  

Dedicated to the memory of John F. Kennedy, whose great-grandfather, Patrick, was born in the nearby village of Dunganstown, this arboretum near New Ross, County Wexford, contains a plant collection of presidential proportions. The Arboretum was established in 1968, following a visit by Kennedy whilst President to the area in 1963, and it covers 252 hectares and contains over 4,500 types of trees and shrubs from all temperate regions of the world. A visitor centre houses engaging exhibitions on JFK and on the Arboretum itself. The original structure at the heart of the Arboretum is a masterclass in timber post and beam construction, although the exposure to weather in the south of Ireland provoked some deterioration in the building fabric and to the original roof. PAC DESIGN STUDIO, Dublin, were appointed by the Office of Public Works to survey and establish a contract for fabric replacement and repairs to this beautiful structure, which were completed in 2021. The original roof was replaced and the new roof now features PREFA PREFALZ P.10 Dark Grey Standing Seam. A & A Quinn Roofing Solutions Ltd, Wexford, carried out the installation of the PREFA PREFALZ to the new roof.

Ronafix Pre-packed Wearing Screed 15mm+ was used in the plant rooms and loading bays at One Canada Square. The London skyscraper is the 3rd tallest building in the UK, has nearly 10,000 people working on-site and takes 130,000 deliveries each year!

Pura® NFC by Trespa as connecting factor between two building volumesIn close cooperation with Guus Vedder (2•1 Architecten), architect Hendrik Jan van der Valk (Van der Valk Woudst ra) has designed a modern villa, consisting of two main volumes. The villa was for a private client and is located in a rural village in the Veluwe region. One volume is used as living/ dining room and kitchen, while the bedrooms, bathrooms, playroom and technical area are located in the other.The client had a number of explicit requirements for the design of the villa which is located on a large plot in a wooded area. In addition to various aesthetic aspects, the villa had to be sustainable and energy neutral. The facades, roofs and floors were therefore very well insulated and of airtight construction. All window frames have aluminium profiles with optimum insulation and have triple glazing. The whole house is equipped with domotics and all installations are powered by the solar panels that were fitted; there is therefore no need for a gas connection.

We were delighted to be commissioned to provide a complete playground regeneration project, for a prestigious school in Sussex. The current play facilities were starting to feel dates, and the school wanted some fresh, colourful and natural themed equipment and surfacing to reenergise the areas.3 different areas on the site catered to various age groups, and the level of challenge on the equipment reflected this. A mixture of climbing, trim trails, multiplays, a zip wire, and some tall slides will make playtimes fun for many years to come. Equally, the safety surfacing was designed to be colourful and informative, with inlaid graphics featuring windmills and electric charging points on the track helping reinforce the importance of a low carbon future.

Milliken's Arctic Survey, Isotherm design was specified for this modern and sophisticated workplace. This textural plank carpet, with Comfort Plus cushion backing was chosen in the cool, calming greys of Antarctic and Snow caves to work perfectly with the natural woods and green planting in this inspirational design scheme.

Basildon & Thurrock University HospitalBauder Total Roof System (BTRS) and LiquiTEC cold applied waterproofing systemSynopsisBasildon and Thurrock University Hospital’s existing roof was failing in multiple areas, and 80 rooflights needed replacing. The client wanted the refurbishment to make as little impact as possible on the departments directly below which included drug refrigeration, x-ray and ultrasound clinics, patient wards and operating theatres.Bauder Building BoardProject:Basildon & Thurrock University HospitalLocation:EssexProject Type:RefurbishmentRoof Area:900m²Specifier:NHSApproved Contractor:Breyer ConstructionProject challengesThe plant on the rooftop could not be turned off or raised and many of the AC units and boilers had to be left running due to the nature of the rooms below. Certain areas had to be repaired before others and detailing under and around the plant that could not be raised was almost an impossible task. When working around the plant, COSHH regulations had to be considered and adhered to.The result Coordinating with both the client and approved contractors was key in this project, and by using cold liquid applied waterproofing the contractors could ensure a watertight seal with quick application, allowing them to complete the remainder of the roof using reinforced bitumen membrane, and meet the tight project deadline of 12 weeks.System installedBauder Total Roof System (BTRS)Suitable for a variety of applications on both new build and refurbishment projects and can be used in warm, cold and inverted roof scenarios.1 Bauder K5KA top quality, heavy duty, torch-applied SBS elastomeric bitumen capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.2 BauderTEC KSA DUO 35A 3mm thick technically advanced self-adhesive elastomeric bitumen underlayer with DUO lap technology and glass lattice reinforcement.3 BauderPIR FA G16 Tapered (laid to falls)Tapered insulation is a lightweight, convenient, easy to install and cost-effective alternative method of providing falls to a roof instead of incorporating them into the structure.4 BauderTEC KSD FBSA technically advanced, self-adhesive SBS elastomeric bitumen air & vapour control layer, with a mica finished upper surface to allow easy bonding of insulation using the specified Bauder insulation adhesive.LiquiTEC Roof SystemThe Bauder LiquiTEC roof systems combine ease of application, fast cure and durability to provide a cold applied liquid waterproofing product second to none.1 LiquiDEK with reinforcement layerA cold applied liquid fast curing waterproofing resin, for use on the main roof area of the LiquiTEC Roof System. It is applied in 2 coats ‘wet-on-wet’, with a layer of Bauder 110g reinforcement fleece between them. The product is a PMMA based resin and requires the addition of catalyst to trigger curing. It is solvent, isocyanate and halogen free, minimizing its environmental impact.2 BauderTEC KSD DUOCarrier membrane & Vapour Barrier is a technically advanced self-adhesive elastomeric bitumen vapour barrier with patented “DUO” lap technology. The product features an aluminium foil facing for vapour impermeability.AdvocacyBreyer Roofing’s Contracts Manager for the project, Kerry Cutts:“The main challenge was working around the hospital’s requirements. For example, we provided a weekly plan for the areas we were working in and the rooflights / plant affected. Where possible, we worked out of hours while doing rooflight replacements to minimise any issues. We also worked closely with Bauder to vary the specification when we had to work around live plant. The communication between Bauder and Breyer Roofing was exemplary throughout and I was pleased this completed project was nominated for a national award."

We were commissioned to supply and install cloakroom fittings and a bespoke ‘classpack’ package for a four-classroom extension at Hillside School in the north-east of Scotland... all to seriously tight deadlines.Portlethen is one of Aberdeen’s fastest-growing commuter towns and, within two years of completion, the local primary school needed space for more pupils... quickly. What’s more, the four-classroom extension had to be completed while the existing school and nursery operated as normal.Boyco were approached to simply provide fixed furniture and equipment but, instead, proposed a fully managed, supply and installation service that would ease the pressure on main contractor Bancon Construction. Our end-to-end package included the design, manufacture and installation of a bespoke system of cloakroom fittings, teacher walls, kitchen units and height-adjustable worktops.Challenging lead times were made more difficult by the coronavirus pandemic and new construction site rules. However, we put together a plan of works for accelerated manufacture and installed the systems in just two weeks at the end of 2020. The extension was handed over to the client in January 2021.“It was satisfying that even in the midst of a global pandemic, the Council and its partners could work together to ensure the completion of the project,” said Cllr Gillian Owen, chair of Aberdeenshire Council’s Education and Children’s Services Committee.Throughout, we liaised directly with the architect and the end client, combining our skills and experience to provide a fully-managed service designed to take the pressure off the main contractor. “Hassle-free” was how they described it. The project contributed to a portfolio of successful supply-and-fit projects in Scotland. “I will be recommending that Bancon Construction use Boyco on future projects,” said site manager Colin Smith.The service from Boyco couldn’t be faulted - from the drawings and delivery schedule to the quality of fittings, and an installation team who worked diligently without fuss to get the work completed on time.Colin Smith, Site Manager, Bancon Construction

A high profile residential development located on the derelict site of the once mighty Wimbledon FC, completed in 2008.OverviewAxter designed and supplied a complete structural waterproofing, insulation, drainage and landscaping solution to all elevated podia. The areas were intensively landscaped combining hard and soft finishes, creating a mixture of meandering pedestrian walkways and landscaped recreational gardens with a combined area of 6000m2.ChallengesThe primary challenge was to achieve a robust structural waterproofing system that could provide construction programme design, installation and cost efficiencies.A complex site drainage strategy, combined with multiple hard and soft landscaped finishes of varying depths, resulted in the need for additional drainage and water retention measures to be designed and implemented throughout the site.A high cost and varied landscaping design, with a relatively short seasonal installation time frame, demanded a waterproofing system designer and manufacturing partner that could meet these challenges.SolutionsThe design supply and installation of Wilotekt-Plus, unique second generation hot melt structural waterproofing system, provided 30% quicker on site installation speeds than traditional first generation hot melt systems. This ensured the waterproofing was completed swiftly, in excess of 500m2/day, which enabled landscaping finishes to be installed within deadline.The drainage strategy was simplified across all podia through the creation of a horizontal drainage zone above the waterproofing. Axter’s combined reservoir and drainage board was installed, retaining appropriate moisture levels for the specified plant requirements, whilst allowing excess moisture to drain freely away. It also acted as a permanent shutter for concrete works that allowed secondary structures to be built off these areas without contacting the waterproofing system or interrupting the drainage zone.Intensive hard and soft landscaping was completed by Frosts Landscapes Ltd using conveyor technology to distribute the soil and plants across the podia with ease.Systems in useWilotekt®-Plus

The 77 metre long living wall on the link bridge at New Street Station in Birmingham welcomes travellers from all over the country to the centre of the city. The living wall creates a pleasant promenade of calming, green infrastructure amongst this built urban environment with the addition of 16,600 plants.

This 1,800m2 living wall in Leeds at at recycling & energy recovery facility, is the largest in Europe. It is a vertical forest that incorporates over 100,000 plants including larger shrubs, small trees and over 700 habitat boxes. At 28 metres tall it is also one of Europe’s tallest living walls

Topseal PU was specified over numerous roofs on this hospital covering 1000's of metres. Topseal PU was chosen due to its BBA certification, high performance, 25 year guarantee, low odour together with the failed asphalt roofs and amount of plant on the roof it was the perfect product.

University of Aberdeen Science Teaching Hub’s development is an ambitious regeneration plan consisting 73,194sq ft teaching and laboratory space over three floors, and a plant room on the fourth.  Location: AberdeenContractor: RobertsonArchitect: RSPAspex supplied: Intercoms, & Access Control throughout the building

GEC Anderson stainless steel back bar counters and units were specified for the Foyer Bar and Mezzanine Kitchen at landmark London theatre, the Lyric.Mica architects were asked to handle the extensive refurbishment and GEC Anderson were awarded the contract to supply and install their specialist back bar equipment. Although the overall area of the bar is quite large, including all of the required items and equipment within its confines was quite challenging. Careful planning and design was necessary to achieve it and some unique fabrications and inventive use of available space were needed. Careful co-ordination and liaison between the GEC Anderson, the theatre and the design team enabled the end result to be realised.

Private Clinic Blomenburg stands for holism when it comes to the therapy and design concept.A haven in the middle of a beautiful environment in the north of Germany: The 19th Century Blomenburg („Burg“ for castle), is surrounded by a huge park. Away from the everyday hustle and bustle, offering 69 furnished in premium quality, spacious single rooms and suites. The modern bathrooms are equipped with KEUCO furnishings and complement the syntonic interior design. Here the guests can dedicate their soul to regeneration in a quiet and peaceful stylish ambience.The elaborate restoration of the building was carried out taking the historic importance and special use of the Blomenburg into consideration. The new building with its generous glass facade was constructed under the castle rock and now accommodates the guest rooms. Between the old and the new building, there is an approximately 800m² big spa and pool area engrafted in the topography of the castle rock. The historic buildings surrounding the castle yard are used for social purposes, medical fitness, healthy living and mindfulness training of the body, soul and mind. The exclusive design of the indoor rooms is not to be compared with the magnificence of the outside of the buildings.Noble materials and luxurious items of furniture in the guest rooms create an ideal setting for convalescence and relaxation. This temporary home equipped with KEUCO furnishings and accessories in the bathroom offer the guests plenty of storage space for personal care products. Not only do the PLAN vanity unit and tall unit in unobtrusive truffle offer generous storage space, but the light mirror with a frame offers additional storage space. The perfect light lets the windowless bathrooms appear brighter and friendlier. The integrated mirror heating makes it possible to look in the mirror after a hot and relaxing shower.IXMO fittings in a strong design offer intuitive use to reach the right temperature. Matching accessories nicely round-off the bathroom interior in a coherent way and perfectly match the high-class concept of the clinic.

Data centres and server halls present unique challenges that demand a distinct approach to architectural design and infrastructure. These facilities require a delicate balance: efficient ventilation to combat heat accumulation while ensuring robust protection against intrusion and unauthorized access.Challenges faced by Data CentresHeat AccumulationThe relentless heat generated within data centres necessitates effective ventilation systems to manage and disperse this thermal load efficiently.Security and PrivacySimultaneously, the need to shield sensitive information from prying eyes and potential intruders underscores the crucial requirement for stringent security measures without compromising on airflow or functionality. Solutions to Address Data Centre Challenges 1. Natural and Intensive Ventilation To meet the specific needs of each data centre project, our range of ventilation solutions is tailored to ensure optimal airflow. By combining DUCO ventilation products, such as weather-resistant screening and louvres (DucoWall), Nightcooling (NightVent), dampers (DucoGrille Close), transfer grilles, roof turrets for discreet air vent concealment, and sound-absorbing, self-regulating window ventilation, we create bespoke high airflow systems suited to your project's requirements.Explore our high-performance products2. Acoustic Noise ControlNoise pollution management is paramount in data centres. Our DucoWall acoustic louvre walls and sound-absorbing window vents are specifically designed to minimize sound while maximizing airflow to equipment. The louvre blades are filled with non-flammable mineral wool, ensuring effective noise control.Discover our noise control solutions3. High Security LevelEnhancing security and reducing the visibility of machinery is critical. Our DUCO louvre wall screening and structural solar shading act as visible screens, maintaining natural airflow while deterring intruders. The DucoDoor seamlessly integrates with the louvred walls or screening, providing access to server halls and technical areas without drawing attention. Our patented intrusion-resistant solution increases security while shielding open plant equipment from view.Explore our security solutions4. Architectural Solar ShadingPreventing heat penetration through windows or entrances is vital in data centres. Our solar shading solutions reduce heat ingress, minimizing the need for excessive ventilation to maintain a consistent indoor temperature.Find out more about our shading solutionsResults and Impact Implementing these tailored solutions across diverse data centre projects has brought remarkable outcomes:Optimized EfficiencyBespoke ventilation systems have significantly reduced energy consumption while maintaining precise airflow control, ensuring an efficient data centre environment.Enhanced PerformanceAcoustic noise control measures have fostered a quieter and more productive workspace, maximizing equipment performance and staff focus.Improved SecurityIntegrated high-security solutions have fortified data centres against intrusions while maintaining essential airflow and functionality.Sustainability AdvancementsArchitectural solar shading has contributed to sustainability goals by minimizing heat ingress, reducing reliance on energy-intensive cooling systems. These solutions collectively exemplify our commitment to revolutionizing data centre ventilation and solar shading solutions, ensuring optimal performance, security, and sustainability.

This leading private hospital offers rapid access to the very latest diagnostic equipment and tests, including CT, MRI and PET scanning. It has five main operating theatres, a fertility lab and a cardiac catheter lab.

Cannon Park Shopping Centre in Coventry has undergone a significant transformation. Led by MPR, the redevelopment project includes refurbishment of the existing shopping centre, construction of a new 780-bed student residence, and the addition of a new 400-space multi-storey car park. Biotecture was brought on board to incorporate living walls into the development.In 2021, Biotecture installed a 690 square metre green wall on the multi-storey car park as part of the project’s first phase. We then continued to collaborate with the project’s architects, Urban Innovations, and landscape architects, Parkhood, on phase 2; 9 living walls on the student accommodation phase. The vertical greening was an important part of the scheme, helping to help soften the development, improve air quality, contribute to biodiversity net gain.The living walls are integrated into the building fabric. We worked closely with the design team to ensure that the living walls not only aligned with the desired aesthetics but also met the technical requirements.We used our BioPanel system which uses Grodan® as the growing medium. Grodan is dimensionally stable, chemically inert, and water retentive resulting in healthier and longer-lasting plants.

We supplied and installed over 500m² of Jakob Webnet for the new build sports hall at St Dominic’s College in Harrow. The Webnet, now clad with climbing plants has created a free-standing green wall which provides shade to the building and effectively disguises it, allowing it to blend in to the surrounding grounds.

The £25 million redevelopment of the hospital includes a new emergency department. Working alongside our clients Willmott Dixon Interiors Ltd, GDL were appointed to manufacture and supply the Acoustic Louvres and the Clip-on Louvre screening as part of the 23 hour assessment and A&E refurbishment. Our acoustic Louvres are designed to attenuate medium and high frequency noise breakouts from ductwork and plant room openings and were selected for the existing plant area along Pond Street. This product can be manufactured to suit any bespoke size requirements and is available in single bank or for higher levels of attenuation, double bank.  Our Louvre screening can be located at basement, ground, mid or roof level and can be fixed in a conventional 45º angle or inverted depending on the privacy requirements of the designers and architects. We can also supply single or double leaf doors providing secure access to the screened areas. 

Ark Oval Primary Academy were in the process of having multiple works completed at their academy in Croydon, London which included a new build, re-surfacing the entire playground and various outside equipment including a new canopy.

The ProjectRobinsons is one of the largest independent breweries in the UK. It has a rich history, with the family brewing in the centre of Stockport since 1849. Its main building is called the Unicorn Brewery, after the pub which the family originally ran from 1838.The bottling plant needed a refurbishment, to help keep employees safe. The brewery requested a highly slip resistant flooring surface, to deal with the inherent risk of liquid spillages in the plant, which could cause hazards. To go with the floorcovering they also needed a hard-wearing, robust, and highly slip resistant stair nosing.The stair nosing would need to have low slip potential in both dry and wet conditions, to help ensure safety in the plant. The main way the Health and Safety Executive (HSE) assesses the slip resistance of flooring and stair nosings is by using a pendulum test, which measures the friction of a surface. In this way, a pendulum test value (PTV) can be given to different products. Any stair nosing must have a PTV of 36, or more, in dry and wet conditions to be considered low slip potential.The ApproachSteven Holland Flooring contacted Quantum Flooring to discuss the most appropriate stair nosings for the project. They decided to go with Quantum’s Ecoglo slip resistant yellow tread material, Eglo-34, fitted into double-channel SF225R Slenderline carriers.Ecoglo tread infills are often utilised for their photoluminescent qualities. From just 30 minutes of charge with either natural or artificial light, Ecoglo’s photoluminescent strips can provide 7 hours of glow in either internal or external environments. Ecoglo also has a slip resistant silicon carbide tread material.Eglo-34 is one of the highly slip resistant silicon carbide tread infills in the Ecoglo range. It has a PTV of 70 in dry conditions, and 66 in wet conditions. These both easily exceed the minimum required guidelines for low slip potential in HSE publications, and slip resistance in BS 8300-2:2018. This made Eglo-34 ideal for Robinsons Brewery.The OutcomeSteven Holland Flooring expertly cut Quantum’s yellow Eglo-34 silicon carbide strips to size, and fitted them in both channels of the SF225R aluminium stair nosings. As Ecoglo tread material is secret fix, there was no need for plugs to hide the screws.The result looks fantastic and helps to ensure the safety of all employees at the Robinsons bottling plant. The stair nosing is durable and has very low slip potential, with the double channel Eglo-34 double treads maximising the surface area of grip. The SF225R profiles have a ramped back, to remove any trip hazard at the back of the steps.With the help of Quantum’s stair nosings, Steven Holland Flooring have ensured a safe, secure and visually pleasing staircase in Robinsons bottling plant. The installation will be used for years to come, helping to prevent slips, trips and falls on the spiral stairs.

The shelters were well-received at Rotherham General Hospital; staff now have an undercover space where they can take a breather or enjoy using the outdoor gym equipment, throughout the year. This will be greatly beneficial to their mental and physical health.

To facilitiate their exciting BSc Paramedic Science course, the University of Surrey identified that they needed more practical training space for their students. By working alongside Scott Brownrigg Architects, Newton Specialist Contractor Advanced Basements, and the Newton Technical Team, an extensive existing undercroft was converted into three large, dry rooms that are ideal for the purpose.With an emphasis on practical elements, the exciting BSc Paramedic Science course at the University of Surrey needed a new, well-equipped training facility for its students at the Surrey Research Park, Guildford.Having identified a large existing undercroft for the purpose, the University consulted with Scott Brownrigg Architects, as well as the Newton Technical team and Advanced Basements in order to create a new, dry space.The extensive undercroft area was first separated into three large rooms, based on what each room was going to be used for. These were defined as:A live environment Paramedic Training room, with an existing concrete floor, concrete retaining walls, and blockwork internal wallsA storage area, requiring a new insulated floor, and with concrete retainng walls and blockwork internal wallsA plant room, requiring full internal waterproofing to the walls and floorConsidering that the existing structure was already quite robust, Newton and Advanced recommended an internal Type C Newton CDM System. This method of waterproofing is the most failsafe method, using membranes to capture the water, and sump chambers and pumps to collect and remove it. The pumps are also supported by a battery backup system for total security.Advanced Basements acted as the specialist waterproofing contractor and the waterproofing design specialist on this project, working alongside the architect and client to design the system, before providing a high quality installation.Furthermore, thanks to their early involvement, Advanced also took design liability for the project and guaranteed the installation for the client.