"barrier"

At Exeter Park, PFC Corofil offered technical solutions by our ASFP trained technical team for a fully tested range of cavity barriers to enable Longworth design team to specify the correct barriers for each location throughout the open façade.

Gradus Esplanade Plus primary barrier matting was installed to the main entrance and Boulevard 5000HD secondary barrier carpet to all side entrances, both in colourway Jackdaw (black) helping to reduce tracked in dirt and moisture and reduce overall maintenance costs.

A Manchester based passive fire protection specialist has utilised products from the range of FIREFLY – including the versatile Phoenix Smoke & Flame barriers – to achieve the compartmentation of concealed spaces within the new Macclesfield manufacturing facility of a world-leading pharmaceutical giant.Firetech UK Ltd. is a key sub-contractor to DES for the construction of the extensive new laboratories and production plant for AstraZeneca, part of the FTSE 100 company’s continuing investment at its East Cheshire site for the distribution of drugs to markets around the world. Firetech was established more than 25 years ago and makes extensive use of FIREFLY  flexible fire barriers for its work on both commercial and domestic contracts. In the case of the Macclesfield project, Firetech purchased the FIREFLY  products via national distributor, Encon.  The Contracts Manager for Firetech UK on the Macclesfield Project, Josh Dodds comments: “We work nationwide though predominantly in the North-West of the country and have been using FIREFLY  products for the past five years, including here on this very large new plant.  Early on in the contract we installed a large quantity of Titan Lite™ 120:60 fire barriers in the ‘Amenities Area’ of the building and then when we were tasked with installing a series of smoke and flame barriers in the ceiling voids over the laboratories, we proposed the Phoenix product as being the most cost-effective solution. The work consumed approximately 540 square metres of the Phoenix to create a series of vertical barriers valued at some £50K.  Although we were able to employ standard details for the installation of the Phoenix barriers  and the Collaroll which wraps some of the beams and other features, FIREFLY has been involved from the earliest stages, providing general guidance and carrying out inspections.  The project has gone very well.”FIREFLY Phoenix is a lightweight smoke and flame barrier which facilitates compartmentation within buildings to provide up to 120 minutes’ integrity under BS476 Parts 20 & 22.  Certified by IFCC, the flexible and straightforward to install material is suitable for both new-build and retrofit situations.  Manufactured from woven and non-woven glass, the FIREFLY range is designed to optimise resistance to flame and smoke as well as offer heat protection in a wide range of scenarios. The flexible barriers are easy to install horizontally or vertically using a full selection of ancillary products.  Used mainly in the construction industry across the UK and Europe, FIREFLY fire barriers help to contain fire, giving building occupants extra time to evacuate and the fire service to enter safely.Images shown are taken during installation and some sections of the installation might be incomplete.

Berry Systems supplied and installed perimeter and ramp barriers for new multi-storey car park incorporating very thin  concrete decks.A revised design for the new Heathrow Terminal 2 multi-storey car park called for a floor depth of just 150mm comprising a 60mm deep slab with 90mm structural topping. However, and there’s always a however, a traditional rigid safety barrier post needs fixing with 4 bolts each to a depth of 170mm. Obviously these couldn’t be used,so contractors Laing O’Rourke turned to barrier specialists Berry Systems to provide a solution and appropriate perimeter barriers for the 6 decks and the spiral entrance and exit ramps.Over many years Berry Systems have developed a range of flexible spring steel barriers that ‘give’ on impact. This not only reduces damage to both the barrier and an impacting vehicle but crucially reduces the pull out loading on the anchorage by 50% or more. This in turn allows post fixing to be achieved by using only a single bolt embedded to a depth of merely 110mm - a depth achievable into the new slabs.The specification was completed with Berry Beam safety rails to provide a more attractive appearance than the well known “Armco” style. Post extensions provided mountings for a pedestrian handrail at 1100mm high with integral anti-climb mesh where needed.The thin slabs were developed by Bison Manufacturing and are the thinnest precast concrete planks produced to date in the UK. They led to many benefits which considerably reduced the construction programme. It also allowed 6 floors in the usual height of 5, increasing capacity to 1340 spaces. But perimeter protection would have proved problematical without the expertise of Berry Systems.

Proud, patriotic and British to the core, Newgate have provided traffic control barriers to the British Royal Family for many years.We feel honoured that a British designed and built range of products can be associated with the most respected Royal Family in the world.We also trust that our barriers will provide long and lasting service and be around to grace these magnificent buildings for many years to come.

FIREFLY™ PHOENIX Offers Temporary Fire Protection For Fenchurch Street OfficesThe refurbishment of two complete floors to one of the City’s largest office buildings is making use of the well proven and versatile TBA FIREFLY™ PHOENIX smoke & flame barriers, to create temporary fire barriers while the work is being carried out: protecting people and property across the rest of the five storey structure where business continues as normal.The project at 30 Fenchurch Street, EC3 is being led by Overbury – one of the capital’s most experienced fit-out contractors, while the London office of HLW Architects is leading the design team. T&R Fire Protection meanwhile is the specialist sub-contractor carrying out the installation of the PHOENIX around the atrium, as well as other passive fire protection measures as the scheme evolves.In total T&R has fixed 22 rolls of the lightweight PHOENIX material to create the two hour integrity smoke and flame barriers around the glazed edge of the floor plates at levels Three and Four of 30 Fenchurch Street. The lightweight barrier has been fixed to the bulkhead and at intervals down all of the existing columns, before finally being secured across steel angle sections bolted to the floor slab.IFC Certification duly inspected all 160 metres of the temporary barriers – up to 3,300 mm in height - once installed, on behalf of Overbury and duly issued a certificate of compliance. The permanent works are expected to include creating fire breaks within the ceiling zones at 20 metre intervals, as part of T&R’s overall contract for Fenchurch Street in the region of £250K.The Site Manager for T&R Fire Protection, Tom Port Smith, commented: “We’ve used PHOENIX and other FIREFLY™ products on many hundreds of projects in the past, but in this case it was the insurers for the project who insisted on the installation of the screens to protect the atrium while the sprinkler system was being replaced. The installation though was relatively straightforward and in our work generally, FIREFLY™ is our ‘go to’ manufacturer when it comes to fire compartmentation. We base our recommendations and design drawings on TBA FIREFLY™ standard details and, once they’ve been approved, go in and install the flexible fire barriers.”Tom, like the majority of T&R Fire Protection’s operatives, has attended training sessions at FIREFLY's premises in Rochdale, reinforcing their trade skills and gaining valuable insights into the performance parameters of the different barriers in the range.FIREFLY™ PHOENIX is a lightweight smoke & flame barrier developed to enable compartmentation within buildings to provide up to 120 minutes’ integrity under BS476 Parts 20 & 22. Certified by IFCC, the flexible and straightforward to install material and is suitable for both new-build and retrofit situations.Manufactured from woven and non-woven glass, the FIREFLY™ range is designed to optimise resistance to flame and smoke as well as offer heat protection in a wide range of scenarios. The flexible barriers are easy to install horizontally or vertically using a full selection of ancillary products. Used mainly in the construction industry across the UK and Europe, FIREFLY™ Fire Barriers help to contain fire, giving building occupants extra time to evacuate and the fire service to enter safely.

Coopers solution was to install over 100 SmokeStop smoke curtain barriers. Concealed within the ceiling voids of each of the 39 floors, the SmokeStop smoke curtain barriers were developed to deploy in the event of fire, channelling smoke away from occupant and out of the building. This effective strategy for containing and channelling smoke would ensure that Gherkin’s 41 floors were protected from filling with smoke and provide occupants with a safe means of escape.

HTA Architects designed the Next Wave scheme to renovate the seafront and public realm surrounding the Grade 1 listed modernist De La Warr pavilion. The CABE Seachange Funded project which aims to make the area a more attractive place for residents and visitors to Bexhill, and a catalyst for economic regeneration of this seaside resort.When Bexhill on Sea needed a new barrier for the seafront promenade, Architectural Street Furnishings (ASF) was contacted to look at the project.For harsh coastal environments, ASF would typically advise the use of cast iron products, however the client brief requested the barrier was constructed from aluminium, in a design that was sympathetic to the architecture of the De La Warr pavilion.Aluminium is not renowned for being particularly durable in coastal environments. To ensure the barrier would withstand the environmental conditions over time, ASF had the aluminium hard anodised.The anodising process involved the immersion of aluminium in a bath of sulphuric acid (an electrolyte) and running a low voltage electrical current through the bath. Normal anodising results in a thin coating of aluminium oxide (rust) on the surface of the material, hard anodising is achieved by cooling the solution to freezing temperature and increasing the amount of electric current that is passed through the bath.Hard anodising produces a much thicker coating of aluminium oxide, rendering the finished material only a few hardness points below diamond and protecting it against harsh environments such as the salt at the coast.The client agreed the simple clean lines of the design and a machined aluminium cap was added to finish off the modern and stylish barrier.The finished result is a low maintenance, minimalist seafront barrier that will not pitt or corrode over time. The use of anodised aluminium enabled the client's brief to be matched without the need for compromise.

Hush Acoustics provided an effective solution to ‘noise break-in’ at a newly built primary school in Chester to ensure the internal acoustic environment was supportive of learning goals.The Huntington Primary school was designed by Cheshire West and Chester Council to cater for 420 primary age pupils and a 26-provision nursery. The former primary schools it replaced had a capacity of 120 children, but to cope with the demand of 1,200 new houses being built nearby on the former Saighton Army camp, the decision was made to build a new school to meet the requirements.An acoustic concern highlighted was ‘noise break in’ which is caused by issues such as the sound of rain falling onto the roof, which in turn would detract from the learning environment. In order to resolve this potential issue and to guarantee the children a healthy setting free from noise disturbance, we specified our Hush 10kg Barrier Mat to be installed in the roof of the building.Hush Barrier Mat is a vinyl sound barrier mat loaded with naturally occurring minerals. The product is free of lead, unrefined aromatic oils and bitumen. Designed to improve the sound insulation of existing panels of metal, wood, plastic etc., at all frequencies. The mat is normally fixed in intimate contact with the original panel. Hush barriers are particularly effective in overcoming coincidence dip resonance found in stiff lightweight composites such as plywood sheets and hollow core panels.Working alongside Kier, were Delta Group, who we supplied with 1100 sheets of our Hush 10 kg Barrier Mat. They then applied this to the roof of the school in 3x layers, to give a mass of 30 kg/m2 and improving acoustic performance across all frequencies.

Contract interiors specialist Gradus has supplied primary barrier matting to the new Haymarket bus station, as part of a £13.5milllion new build project, which allows 23 buses to drop off or pick up at any one time. Gradus’ Esplanade 8500 primary barrier matting was installed throughout the new bus station. Constructed from double grey rubber wipers and silver anodised aluminium scraper linking strips, Esplanade 8500 is an ideal solution for this busy environment.

Column mounted perimeter safety barriers for the upper desk and ramp of a two storey shoppers’ car park.

The busy Stanley Harbour area of the Falkland Islands features barrier protection designed and manufactured by Broxap Street Furniture.

Taking 10 years to build, and costing £23 million, Cambridge Central Mosque is the first purpose-built mosque in the city, being described as ‘the greenest mosque in Europe’. To reduce the noise impact for both local residents and worshippers, our Jakoustic® Reflective acoustic fencing was installed, resulting in a safe, secure, anti-climb perimeter with an aesthetically pleasing noise barrier that blends in with the surrounding area. This is achieved using a flat timber profile along with interlocking ‘V’ boards which reduces the rate at which sound waves can pass through the barrier.

Following the brief outlined by the water treatment plant the proposal adopted for implementation was for the creation of secure access control. Bi-Folding Speed Gates topped with razor wire were supplied to each of the main entry and exit points to the site. These were supported by PAS 68 rising bollards and rising arm barriers with synchronised operation and traffic light signalling. The gates and barriers were flanked by runs of Jacksons Securi-Mesh® fencing to provide a separate pedestrian entrance to the facility, while static PAS 68 rated bollards were additionally deployed to manage traffic within the site.

Artesian House is an eight-storey building comprises 73 mixed-tenure flats, located in Bermondsey, London that is managed by the Hyde Group, alongside a large number of private leaseholder.Artesian House features a distinctive curved design, and so frequent design meetings were crucial to the success of the project. To ensure compliance and thermal performance for the project, three ROCKWOOL® products were specified, namely for cavity barrier protection and insulation.With this in mind, ROCKWOOL Rainscreen Duo Slab, ROCKWOOL SP Firestop Slab and ROCKWOOL SP Firestop Open State Cavity Barrier (OSCB) was installed throughout the building.

Twice the height of any other building in Cyprus, the ONE Tower commands the skyline of Limassol. Sitting on the palm tree lined seafront close to both the city’s bustling business district and its quaint old town, the new development offers 83 luxurious residences, leisure and commercial opportunities set across 37 floors. Its award-winning curved design reminiscent of a yacht’s sail, stands at 170 m high which, coupled with its coastal location, presented a unique set of passive fire requirements for its facade. Key informationCompletion dateSummer 2020SectorResidential | Retail | LeisureEnd clientPafilia Property Developers Ltd.Main contractorArabian Construction Company (ACC) | JV Partners | Joannou & Paraskevaides Group (J&P Group)Facade contractorGlassline Industries LtdArchitectWKK ArchitectsDistribution PartnerDPS TechnoIndustrial Ltd Products usedSiderise RH Horizontal Cavity Barriers for Ventilated CladdingSiderise RVG Vertical Cavity Barrier (galvanised mild steel brackets)Siderise OSCI Open State Cassette Insert DesignThe sheer height of the tower meant it was vital to ensure the facade construction contained adequate passive fire protection, complying with local regulations and ensuring ongoing safety throughout the building’s lifetime. After working with our products and our Cypriot distribution partner DPS for a number of years, facade contractors Glassline specified a combination of open state Siderise cavity barriers and cassette inserts. The RV vertical and RH horizontal cavity barriers are designed to allow the facade system to maintain airflow and drain away any moisture within its construction but, in the event of a fire, rapidly close the ventilation gap to create an effective hot smoke and fire seal. Both products achieve Class A1 to EN 13501-1 and provide 120 minutes fire integrity. The barriers are complemented with the use of OSCI Cassette Inserts which are Class A2 rated. All these products have undergone rigorous third party testing to ensure dependable performance. These include single product tests and testing as part of a large-scale system, such as BS 8414 (1&2) and NFPA 285, demonstrating their performance within a complex, high-rise cladding system such as that used on the ONE Tower. For more detail about the standards the products meet, please visit the individual technical data pages. In addition to providing straightforward passive fire protection, the stonewall lamella core of the RVG vertical cavity barriers allows them to accommodate the natural movement associated with rainscreen facades. This is especially important on this exposed seafront project. It is also for this reason that the cavity barrier brackets were specified in robust galvanised steel, protecting them from corrosion caused by the sea air.InstallationAll Siderise products are designed to be easily installed— a key benefit on this large-scale project, enabling it to be finished to a high standard without compromising the project timeline. The RV vertical barriers and then the RH horizontal barriers were cut to the correct size and installed by Glassline using Siderise galvanised steel brackets and foil tape. Where the two products met, they were simply tightly abutted, and the joints sealed with foil tape to ensure continuity of intumescence and therefore fire protection. The OSCI cassette inserts were then fitted as part of the cladding system, installed directly behind the cassette panels and in parallel and centrally aligned to the RVG and RH cavity barriers. This helped to simplify detailing and ensure the ventilation gap met the project requirements. Technical support and site services were provided by our partner DPS throughout the design and installation process, in-keeping with the Siderise ethos of standing by the side of our customers to deliver optimum results.Final CommentsCreated in collaboration with a number of renowned international and local firms and suppliers, ONE Limassol Tower not only stands as a symbol of the city’s exciting future, but also of what can be achieved when diverse skills, expertise and vision are brought together. The selection of tested Siderise products chosen for the project will help to ensure that the building remains a safe and beautiful home and landmark for the people of Limassol for many years to come.Image copyright (C) Pafilia www.pafilia.com 

Canopies, cycle parking, barriers and bollards made up a package of works from Broxap to support the creation of the High Wycombe Park and Ride service.

Vehicle and pedestrian safety barriers to edge protection on all deck perimeters; lighting columns included in the 460 space multi-storey car park.

RC was approached by Dorsey Construction Materials to supply our award-winning cavity fire barriers and cavity closers for a high-rise housing development in Dagenham.

CMS DANSKIN ACOUSTICS recommended a bespoke combination of industrial acoustic materials to ensure noise at work compliance at ExxonMobil Oil Refinery. The ChallengeFawley Oil Refinery is the largest oil refinery in the UK. When ExxonMobil found that the noise output from two industrial fans at the refinery exceeded the levels specified by The Control of Noise at Work Regulations, it consulted CMS Danskin Acoustics for advice. To ensure the most cost effective and high performing materials were specified, CMS Danskin Acoustics evaluated the noise reduction required on-site. Evaluation of the acoustic data revealed that noise levels in excess of 118dB at 125Hz were being emitted by the fans. Based on these criteria, the technical team at CMS Danskin Acoustics recommended the use of a combination of specialist materials from its industrial acoustic range. The SolutionTo control the low frequency-biased sound, CMS Danskin Acoustics recommended and supplied the SuperLag Quietslab Laminate with Acoustic Barrier Type WB10 combination for the fan casings and associated ductwork. Creating a multi-layered, high performance system, two layers of SuperLag Quietslab Laminate, totalling 250mm thickness, with a core of 5mm Acoustic Barrier Type WB10, were bonded onto the fan casings and ductwork. A direct coupled lagging system, SuperLag Quietslab Laminate comprises long-stranded mineral fibres thermo-set with resins for the absorption of sound at the surface, as well as a high mass inner acoustic barrier core to reduce the transmission of sound through the material. Manufactured from a weight-enhanced, high-density material, Acoustic Barrier Type WB10 provides a flexible and cost effective treatment for chemical and refinery applications. In total, 1,000m2 of the SuperLag Quietslab Laminate/Acoustic Barrier Type WB10 materials were installed around the fans and ductwork to achieve the high levels of sound reduction required.ResultsThe high performance bespoke system specified by CMS Danskin Acoustics, significantly reduced the noise generated by the fans. This enabled ExxonMobil to comply with The Control of Noise at Work Regulations by bringing noise levels under the 85dB compliance level.

A new fulfilment and distribution facility in the centre of Barcelona utilising high end robotic technology is treated to future proof gas protection with GP® TITANFLEX® protective barriers.

FIREFLY™ APOLLO Lite Specified for Royal Stoke RefurbishmentA leading passive fire protection contractor has been involved in the installation of fully compatible products from the range of TBA FIREFLY™ for the creation of half hour fire barriers within ceiling voids to a major general hospital undergoing extensive refurbishment work in the north of England.Birmingham based Cubic FM is the specialist sub-contractor carrying out all of the passive fire protection work at the Royal Stoke University Hospital in the city’s Newcastle Road. The work is making use of FIREFLY’s well proven APOLLO Lite™ 30:30 barrier system in combination with the equally widely specified Collaroll across areas featuring cable trays, water pipes and other building services. All of the barrier and ancillary products are being supplied by the Birmingham branch of Encon, one of FIREFLY’s main distributors.The Senior Contract Manager for Cubic, Brett Kelly, commented: “This is a family run firm where passive fire protection forms one of our key divisions, serving both private and public sector clients: working in schools, prisons, police stations and MOD properties as well as hospitals. The contract here in Stoke has been particularly challenging because the ceiling void of the Lower Trent Ward contains a variety of services - including gas and water - which could not be isolated due to having to keep adjoining areas of the hospital supplied. Also the presence of steel beams meant the new drywall partitions could not be taken right up to the underside of the slab.”“We were first introduced to the FIREFLY's range some three years ago when it was specified by a client, but we now prefer the systems to the rock mineral wool we used previously. The FIREFLY™ barriers are quicker and easier to install, do not create dust or skin irritation and the company is always ready to provide design guidance or on–site assistance. We currently have half a dozen operatives trained up by FIREFLY™ and another group due to attend the company’s training school soon.FIREFLY™ worked with the architect here after they specified the APOLLO Lite™ 30:30 and have been helping us with installation details, where we are using the special staples and adhesives to secure the barriers, as well as around all the service penetrations – working off scaffolding. Overall the installation is progressing very well.”APOLLO Lite™ 30:30 has been developed for use in vertical separation or compartmentation situations, offering 30 minutes integrity and insulation and is able to be sealed around penetrations. It is widely specified to form fire barriers within roof voids and floor voids in many different property types, including tower blocks and other HMOs.The flexible woven material is easy to cut and fix and is treated with a proprietary coating to improve its cooling properties and therefore prevent temperatures rising in adjoining areas. The system has been fully tested to BS 476 Parts 20 & 22 and is third party certified by IFC. The six metre long rolls of APOLLO Lite™ 30:30 have a minimum thickness of 6mm and are installed using stainless steel staples as well as high temperature adhesive.Employed as part of the FIREFLY™ System and also to wrap the services which penetrate barriers such as PHOENIX, ZEUS Lite™ 90:30 and TITAN Lite™ 120:60, Collaroll comes in a roll 10m long x 300mm wide with a sewn-in concertinaed skirt. The skirt can be moulded to shape to seal it neatly to the upright barrier, which is usually at 90 degrees to the Collaroll and fixed into place using the high temperature adhesive. The R31 Staple Gun and Staples are used to staple the Collaroll to itself tightly around the penetration.

An 18 month long fit-out contract for a Tewkesbury based cladding specialist has seen the company install thousands of square metres of FIREFLY® barriers, to protect the roof space and other voids within a major new food processing plant in the Manchester area. Cold Clad Ltd. was appointed by the main contractor to install all of the internal wall panels, suspended ceilings and the kerbing, as well as carrying out the installation of the vertical fire protection barriers using Titan Lite™ 120:60 and Collaroll, which were secured across light gauge steel subframes to provide two hours integrity and 60 minutes insulation.  Aligning with the nearest roof purlin to secure the frames assembled from 50 x 50mm steel angles, Cold Clad created barriers ranging in height from three metres down to less than one metre. While also accommodating the movement requirement of the large metal structure. Cold Clad’s Contract Manager for the project, Ross Camberley, commented: “The scale of the installation meant we had up to 30 operatives involved on the work for most of the period, many of whom had undergone the training course delivered by FIREFLY®, which I also took in order to be able to understand the complexities of erecting the ‘triple curtain’, and also protect all of the penetrations such as steel beams and building services.  While this was a very challenging project due to the scale of the work – and also my first experience of the FIREFLY® range – we are about to carry out another contract in Holyhead for a different client and will actually be using another of the manufacturer’s approved installers to do the work.”  FIREFLY® Titan Lite™ 120:60 is a lightweight flexible fire barrier designed to provide fire compartmentation of larger concealed spaces and voids within buildings, offering 120 minutes Integrity and 60 minutes insulation.  Manufactured from woven and non-woven glass, the FIREFLY® range is designed to optimise resistance to flame and smoke, as well as offer heat protection in a wide range of scenarios.  The certified barriers are easy to install horizontally or vertically using a full selection of FIREFLY® ancillary products to ensure a fully tested and certified installed system.

A new self-build farmhouse in the beautiful Scottish countryside has been fitted with the high-performing Wraptite air-barrier. The project is designed to Passivhaus standards by Architect Frances Strachan-Friar. Talla Fiodha (‘timber or wooden hall’ in Gaelic), Charleston Farm, near Errol, Perthshire, will be the new home for Frances and her husband.From the outset, the aim was to achieve a more sustainable design and follow a different approach from the traditional timber kit. After undertaking significant research into different types of construction, the architect selected Xilonor CLT cross-laminated timber installed by Glulam Solutions Ltd., Inverurie.Frances Strachan-Friar commented on how the selection of Wraptite has benefitted the development. “The specification of the correct type of airtightness barrier was critical in achieving thermal efficiency. Wraptite was chosen because it allows the airtightness layer to be fitted to the outside of the construction. In doing so, the external application of Wraptite provides essential protection in the form of waterproofing and weatherproofing for the CLT during the build.“The Wraptite system was great and easy to apply, especially around junctions, enabling us to seal all of the junctions completely. The use of a traditional membrane would not have given the same performance. I have previously specified products from the A. Proctor Group, but this was the first time using Wraptite. Proctors provided a comprehensive Toolbox Talk and have been a great support throughout the project.”The Wraptite system is the only self-adhering vapour permeable air barrier certified by the BBA. It combines the critical properties of vapour permeability and airtightness in one self-adhering membrane. As a result, it provides high vapour permeability in a continuously sealed, airtight membrane.The high vapour permeability of the Wraptite air barrier allows the substrate beneath to dry quickly and moisture vapour to escape and reduces the likelihood of mould, mildew, condensation, timber distortion and metal corrosion. The vapour permeability of Wraptite also allows any water vapour to escape efficiently, thereby avoiding interstitial condensation problems.Designed to replace traditional airtightness methods cost-effectively, Wraptite is a low-resistance vapour permeable air barrier, durable, flexible and lightweight, allowing for easy installation, with the added benefit of providing temporary protection against the elements during construction

The completion of a stunning new Hilton hotel at Silverstone is another step nearer and leads the way featuring the superior high-performance Wraptite external airtightness barrier.The impressive new hotel, located trackside, overlooks the starting grid for the home of the iconic British Grand Prix. Facilities include 197 guest rooms, a rooftop terrace and the offer of race-day hospitality experiences.KKA Architecture designed the hotel, with Metclad Contracts appointed as the specialist envelope contractor for the project.Wraptite airtightness membrane from the A. Proctor Group, specialists in supplying high-performance products to protect buildings, was selected by Metclad to maximise airtightness and energy efficiency, perfectly balanced with the crucial requirements of vapour permeabilityWraptite self-adhesive breather membrane is applied externally, quickly and efficiently as part of the rainscreen system. Incorporating the Wraptite System helps ensure “as-designed” performance. Its inclusion narrows the gap between asdesigned and actual energy performance whilst reducing the likelihood of possible failures to meet required airtightness levels.Traditionally air barriers have been fitted internally. The internal installation of an air barrier necessitates accommodating building services such as electrical, lighting, heating and drainage systems, thereby increasing the gap between as designed and built. However, the Wraptite membrane fully bonds externally to virtually any substrate, requiring no additional mechanical attachment, seals or tapes to suppress air leakage around junctions or penetrations.The high vapour permeability of Wraptite allows the substrate beneath to dry quickly and moisture vapour to escape and reduces the likelihood of mould, mildew, condensation, timber distortion and metal corrosion.Wraptite is the only self-adhering vapour permeable air barrier certified by the BBA and combines the critical properties of vapour permeability and airtightness in one self-adhering membrane. Quite simply, providing a winning performance in advanced membrane technology for buildings.

Broxap Street Furniture has designed, manufactured and installed a range of cycle parking and has supplied seating, picnic benches, door barriers and litter and recycling bins for the £20 million Chorlton High School South.

FIREFLY ZEUS Lite™ Safeguards Ceiling Spaces Across Wakefield Food WarehouseForming a fresh element to the UK’s critical food supply infrastructure, a new distribution warehouse in Wakefield, West Yorkshire, is near to completion with the specialist suspended ceiling installer making use of ZEUS Lite™ 90:30 from the range of TBA FIREFLY™, to create vertical fire barriers at intervals within the roof-space across the footprint of the building.The 15,300m2 facility at Headways in Stanley, on the outskirts of Wakefield, has been built by GF Tomlinson for the Kitwave Group, a national distribution business with a fleet of over 500 vehicles supplying hotels, restaurants and many other venues across the country. The installation of the ZEUS Lite™ was undertaken by Nottingham Suspended Ceilings, as the sub-contractor well experienced with the performance and user-friendly characteristics of the Firefly range.All the rolls of ZEUS Lite™ 90:30 material and the well proven FIREFLY™ fixings, including stainless steel staples and fire-resistant adhesive, were supplied to Nottingham Suspended Ceilings by the merchant, Minster On-line.The site agent for Nottingham Suspended Ceilings, Mark Prescott, commented: “Our company carries out commercial contracts right across the East Midlands and beyond, where we have made use of Firefly barriers on a large number of past projects. Although you have to be a competent contractor and follow the manufacturer’s guidance precisely, we find the ZEUS Lite™ and other products in the FIREFLY™ range straightforward to install. In the case of the warehouse here, we have now completed the installation of the fire barriers up to roof level in dozens of locations across the building; as well as installing all of the suspended ceilings throughout.”FIREFLY™ ZEUS Lite™ is ideally suited to this type of application, comprising a flexible woven fabric fire barrier that has been specifically developed for the vertical separation and compartmentation of extensive concealed spaces within buildings.By offering 90 minutes integrity and 30 minutes insulation, FIREFLY™ ZEUS Lite™ 90:30 exceeds the minimum requirements regarding fire barriers under the Building Regulations’ Approved Document B (Fire Safety). The specially treated glass fibre fabric is strong and resilient as well as flexible while, crucially, the system’s certification covers the inclusion of service penetrations; which many alternative products do not.

All in-ground filtration reservoirs were lined using 2,5mm thick polyethylene geosynthetic barriers, complying with the strictest quality requirements (the total volume of BAM-certified membranes supplied to BER projectwas 400 000 m2).

Gradus products were supplied throughout the Darwin Building. GXT51 stair edgings with interior inserts in Snowdrift (white) were installed on the main staircase. Boulevard 6000 barrier matting was also installed at the main entrance of the building.

As part of the development of Birmingham New Street to transform into Grand Central, key infrastructure works were undertaken. Berry Systems installed a bespoke barrier system that was designed, manufactured and installed as per our client's project specific requirements.

For what is one of London’s tallest residential towers, Siderise, leaders in the development of fire, thermal and acoustics insulation solutions, has provided cavity barriers and perimeter fire seals as part of the glazed curtain walling system for the Landmark Pinnacle Tower.

Gradus supplied R95XT11 PVC-u and CXT3 aluminium stair edgings to the main staircases to help protect against the risk of slips, trips and falls. Gradus also supplied a range of barrier matting to the development, including Esplanade 5000HD and Boulevard 5000HD.

A significant redevelopment project at a specialist mental health hospital in Nottinghamshire is nearing a successful completion, with two of FIREFLY’s versatile and fully certified systems being employed by one of the manufacturer’s approved contractors installing the lightweight, but high performing fire barriers, to protect the ceiling spaces. The work at the Millbrook Mental Health Unit in the Sutton area of Mansfield is being carried out by Tilbury Douglas on behalf of the Nottinghamshire Healthcare NHS Foundation Trust and includes the construction of a new dementia ward as well as the refurbishment of two existing wards.  The new facility will create a low-stimulus environment containing 18 single bedrooms with en-suite shower rooms, while the refurbished building is being upgraded to meet current NHS guidelines, as well as to achieve compliance with the latest requirements of Approved Document B and the Building Safety Act.   Coventry based KRASI Fire Protection Limited – a specialist sub-contractor well experienced in hospital upgrades, including other projects across the East Midlands – was awarded its package under competitive tender and had up to 10 of its highly trained operatives on site during the four-month contract.  The company’s Contract Manager, Daniel Oldacre, commented: “When we were approached to install all of the fire barriers within the building at the Millbrook Hospital, we put forward the APOLLO LiteTM 30:30 and TITAN Lite™120:60 as being appropriate to the periods of protection being sought by the project team, including Tilbury Douglas’s fire consultant.  They were really the only products which would have worked in this situation. We have come to rely on FIREFLY® systems in recent years since we moved away from mineral wool solutions.  They ensure high performance with good technical back-up when required and, crucially, they carry the best testing.”  “In this instance, FIREFLY’s regional manager, Dave Allen attended the site to advise on some special details – provided as sketches backed up by email confirmation with photographs.  The TITAN Lite™120:60 provides 120 minutes integrity and 60 minutes insulation, while the APOLLO LiteTM 30:30 offers 30 minutes in each respect.  There were no horizontal barriers required on this job.” While Krasi carries out its own IFC certification work, FIREFLY’s technical consultants continued to visit the project at intervals to confirm that all of the work was being carried out in accordance with the manufacturer’s instructions: with the special staples and fire rated adhesive being used to attach the barrier materials to sub-frames of steel angles reaching down on top of the individual partition walls creating compliant compartmentation.  Krasi’s completed contract saw a total of 700 square metres of Titan Lite and Apollo Lite barriers installed throughout the refurbished ward building. Manufactured from woven and non-woven glass, the FIREFLY® range is designed to optimise resistance to flame and smoke as well as offer heat protection in a wide range of scenarios.  The barriers are easy to install horizontally or vertically using a full selection of FIREFLY® ancillary products to ensure a fully tested and certified installed system.The lightweight and flexible FIREFLY® Penowrap has been developed to compliment other FIREFLY® fire barrier systems and can be used to fully protect structural members as much as 300mm below the main barrier, offering additional protection.  It provides 60 minutes integrity and 60 minutes insulation when used to wrap around exposed sections of timber or steel during the construction or upgrade of a building.Tested to BS 476 Parts 20 & 22, FIREFLY® Penowrap is manufactured utilising a layer of non-woven silica with aluminium foil on the outward facing surface.  The product, which is non-toxic as well as easy to cut and shape, has additionally received a Pass for Parts 6 & 7 (propagation and surface spread of flame).  The 300mm wide fire wrap is supplied in 10 linear metre long rolls, and is just 12mm thick.  Furthermore, it only weighs 2.02kg/m2 so it is light to handle on site.  FIREFLY® Penowrap is installed using standard fixings and is fully compatible with the angles and high temperature adhesives to be found within the approved FIREFLY® range.  

ASF were asked to produce handrailing and glass balustrade for a facelift project at the site of the re-purposed Bradford library. 3 main products were selected: The ever popular ASF 5006 handrailing for the steps - supplied as central double rails and single rail at the wall sideASF Max Channel, 3kn Frameless Glass Balustrade hosted between granite piers on the walkwayThe ASF Adaptions, Stud Mounted Glass Balustrade that finished off the barrier section of the public terrace when approached from the top, and complimented the step units when viewed from below.The finished effect of the Adaptions balustrade on this project celebrated 2 of this system's key benefits. From the top it brought the viewing platform barrier to a full 1100mm whilst not interrupting the view across the city and from below offers a visually impressive architectural feature.

To meet the passive fire protection requirements for a new 27 storey high-rise student accommodation in the centre of the thriving Welsh capital of Cardiff, Siderise, leaders in the development of fire, thermal and acoustics insulation solutions, has provided cavity barriers and firestops as part of the curtain walling system.

Fully compatible products from the range of TBA FIREFLY™ have been chosen to compartmentalise roof voids between apartments and communal lobbies of a large apartment building in the London Borough of Lewisham, providing 120 minutes fire integrity protection as part of a wide ranging refurbishment programme carried out earlier this year.The contract on Lewisham Homes’ Commodore Court in Albyn Road has been led by the sector specialist construction company, Mulalley & Co. with London/Sevenoaks based CLM Fireproofing carrying out the installation of the TITAN Lite™ 120:60 barrier system, in combination with Collaroll and the use of ancillary products from the FIREFLY™ range.CLM Fireproofing was founded 30 years ago by Clive Miles and has established a reputation as a leader in the fields of both passive fire protection and fire-stopping; working in a variety of sectors on projects right across the UK. A regular user of the FIREFLY™ range, many of its operatives have attended courses at the company’s premises in Rochdale to become trained FIREFLY™ installers.The Site Agent for CLM, Virginijus Pasvenskas, commented: “There was initially an intention to use a mineral wool flexible fire barrier, but the product was not tested for the scenario installed around the services such as a downpipe and it was upgraded to the use of the FIREFLY™ system by the client/project team. The installation of the TITAN Lite™ and the Collaroll to wrap the trusses and the services went very well and, as well as supplying specific details for the work, FIREFLY's technical team came to site to inspect the works. We completed our contract on schedule back in the summer.”TITAN Lite™ 120:60 has been developed for use in vertical separation or compartmentation situations, offering 120 minutes integrity and 60 minutes insulation and is able to be sealed around penetrations. It is widely specified to form fire barriers within roof voids and floor voids in many different property types, including tower blocks and other HMOs.The flexible woven material is easy to cut and fix, and is chemically treated to improve its cooling properties and therefore prevent temperatures rising in adjoining areas. The system has been fully tested to BS 476 Parts 20 & 22 and is third party certified by IFC. The six metre long rolls of TITAN Lite™ 120:60 have a minimum thickness of 6mm and are installed using special staples as well as high temperature adhesive.Employed as part of the FIREFLY™ System and also to wrap the services which penetrate barriers such as PHOENIX, ZEUS Lite™ and APOLLO Lite™, Collaroll comes in a roll which unwraps to 10m long x 300mm wide with a sewn in concertinaed skirt. The skirt can be moulded to shape to seal it neatly to the upright barrier, which is usually at 90 degrees to the Collaroll and fixed into place using the FIREFLY™ high temperature adhesive. The R31 Staple Gun and Staples are used to staple the Collaroll to itself tightly around the penetration.