SR4 Rated High-security, insulated folding doors.
Any facility requiring compliance with high security considerations such as:-
High-security, insulated folding doors, which have been specially designed and tested to meet the requirements of high-security installations, whilst maintaining a high aesthetic appearance and thermal performance. The door has been independently tested by the Loss Prevention Council to LPS1175 'Specification for testing and classifying the burglary resistance of building components, strongpoints and security' and has received approval to Grade 4.
This approval confirms that the Superfold 4000 doorset will survive an experienced attempt at a forced entry using portable tools.
Features and benefits:
The Superfold doors are single bunching and internally face fixed.
The doors are electrically operated as standard using a 400-volt nominal, 3 phase direct drive motor mounted on the top track.
A control panel with integrated open/close/stop push buttons is positioned adjacent to the opening at the bunch side.
Emergency hand chain operation with low-level engagement is provided adjacent to the motor.
The leading edge of the door is locked into position by means of a LPCB approved electrically interlocked hasp and staple complete with Chubb 1K11 Battleship padlock
A range of RAL colours available.
Galvanized steel with ethylene propylene diene monomer (EPDM) seals.
Bespoke; consult manufacturer for details and insert requirements.
Maximum 8000mm clear width x 6000mm clear height
null Loose laid gas retardant damp proofing
L20/530 Sliding folding external doors
L20/535 Sliding folding shutter doors
Third party accreditation
Loss Prevention Council (LPCB) to LPS1175 - Grade 4.
Bunching to one side, left-handed.
Bunching to one side, right-handed.
Top track: Galvanized steel rolled section, forming a box-type track on which pulleys run, mounted on the top of the door panels. A branch track is incorporated to allow the door to stack correctly; Bottom track: A steel channel bottom track is provided and set for alignment within a 200 x 75 mm chase, before being grouted into position.
Constructed from 3 mm-thick, double-skin steel sheets, infilled with high-density insulation and special reinforcing ballistic material. The door panels are 56 mm thick and are flush in appearance. Each panel is fitted with high-quality ethylene propylene diene monomer (EPDM) sections, forming a tight weather seat between panels and around the perimeter of the door.
Finish and colour
Electrical via a 400 V, three-phase geared motor, mounted on the top track at one or both ends. Push-button controls are provided at low level
Door panel upgrade to achieve a G2 ballistic rating.
Consult manufacturer for details and insert requirements.
Contains Red List materials
Country of material origin
Country of product manufacture