Premcrete Hydroprufe DPC - Co-Polymer Damp-proof Course
Verified by manufacturer 7 months ago
Co-polymer damp-proof course.
Application
HYDROPRUFE DPC should extend through the full thickness of the wall and must be laid on an even bed of wet mortar. Special care should be taken to make sure that the HYDROPRUFE DPC does not become damaged or punctured during the construction phase. HYDROPRUFE DPC lap should be a minimum of 100 mm and taped together using HYDROPRUFE HCR BUTYL TAPE.
Description
HYDROPRUFE DPC is manufactured from co-polymer thermoplastic membrane and is designed to provide an effective barrier to rising damp and moisture as well as low levels of carbon dioxide and radon.
It is effectively installed into masonry to form a damp-proof course or cavity tray.
General information
Color | Black |
Material | Thermoplastic elastomer (TPE) |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | 25 year |
Uniclass | |
CAWS | F30/330 Damp-proof courses F30/48 Damp-proof course |
Product range |
Specification data - Plastics sheets
Material | Copolymer thermoplastic. |
Purpose | Damp proof course (DPC). |
Performance characteristics | |
Resistant to underground gases | Methane: 7.799 x 10ˆ-12 kg/m². |
Water vapour resistance (minimum) | <0.01 g/m²/day. |
Form | Co-polymer thermoplastic membrane. |
Physical properties | |
Colour | Black. |
Dimensions | |
Thickness (minimum) | 0.4 mm. |
Width (minimum) | 100 mm.150 mm.225 mm.300 mm.450 mm.600 mm.900 mm.1000 mm. |
Roll length (minimum) | 20 m. |
Puncture resistance | 160 N. |
Literature
Hydroprufe PC TDS