Peran STB Public System - Resin Floor Topping
Verified by manufacturer 8 months ago
A hard wearing, decorative resin floor topping made up of colour stable quartz granules encapsulated in a clear low emission resin binder with good UV resistance.
Application
Suitable for use in public and dry process areas where the floor is subject to heavy traffic, impact and chemical spills.
IMPORTANT: All specification information must be checked against the individual site requirements. Flowcrete advises that specifications are confirmed with their technical experts.
Description
A hard wearing, decorative resin floor topping made up of colour stable quartz granules encapsulated in a clear low emission resin binder with good UV resistance.
Features and benefits:
- Decorative.
- Anti-slip finish.
- Environmentally friendly.
- CE Marked.
- Hand trowel applied.
- Scratch-resistant.
- Easy to clean and maintain.
- Wear and impact resistant.
- Seamless, hygienic finish.
- Abrasion-resistant.
- Chemical-resistant.
General information
Color | Black Blue Brown Green Grey |
Finish | Matt |
Material | Resin |
Height | 3 mm |
Uniclass | |
CAWS | M12/10 Resin flooring M12/110 Resin flooring |
Specification data - Resin flooring systems
Substrate | |
Testing | Moisture content of substrates dry to 75% RH. |
Preparation | Preparation of substrate. |
Primer | Hydraseal DPM Natural, scattered with quartz.Guidance for specification option: Hydraseal DPM Natural at 0.3 kg/m², scattered with quartz 1.0–1.8 mm at 0.5 kg/m². |
Resin flooring | Peran STC LE, Peran Compact White mixed with coloured quartz.Guidance for specification option: Peran STC LE at 1.0 kg/m² + Peran Compact White at 1.0 kg/m² + coloured quartz at 3.5 kg/m². |
Surface treatment | Peran STC LE.Guidance for specification option: at 0.2 kg/m². Peran STC LE and Flowseal PU Matt (Ultra).Guidance for specification option: Flowseal PU Matt (Ultra) at 0.12 kg/m² (two coats of at 0.06 kg/m²). |
Certification | CE Marked. |
Fire resistance | To EN 13501-1, Bfl-s1. |
Wear resistance | To EN 13892-5, RWA10 (<10 cm³). |
Temperature resistance | Tolerant up to 70°C (intermittent) or 50°C (sustained). |
Impact resistance | To EN ISO 6272, IR20 (20 Nm). |
Bond strength | To EN 13892-8, B2.0 (≥2 MPa). |
VOC emissions | Indoor Air Comfort GOLD: Pass. Guidance for specification option: M1: Pass | AGB/AgBB: Pass | BREEAM Int.: Exemplary Level. |
Slip resistance | To EN 13036-4, >40 (dry); >25 (wet). |
Cure speed | Light traffic: 24 hours. Guidance for specification option: These figures are typical properties achieved in laboratory tests at 20°C. |
Finish options | Matt. |
Colour options | Commercial, Beige 101. Commercial, Biscuit 102. Commercial, Black 901. Commercial, Dark Grey 703. Commercial, Grass Green 601. |
Thickness | 3 mm. |