NBS Source
List your products
Application

  • Commercial cinemas.
  • 4DX cinemas.
  • Theatres and concert halls.
  • TV studios.
  • Lecture theatres.
  • Home cinemas.
  • Existing structures.

Not currently fire rated.

Description

Partition base track acoustic isolation system, designed to provide maximized sound insulation with minimal imposed load.

Features and benefits:

  • Designed for auditorium walls where exceptionally high sound insulation is required, but wall mass is low.
  • Can be easily shaped and cut to length on site with a retractable knife.
  • CineWALL LITE strips ensure a low natural frequency for reduced height and/ or composite material walls.
  • The system can get wet without being damaged, however it will take on water. When wet, the strips will not provide acoustic isolation and will not dry out once installed under a base channel.
  • Natural frequency (fn) Single strip: 13 Hz. Double strip: 9 Hz.
  • Up to 25 year warranty.

Applications:

  • Commercial cinemas.
  • 4DX cinemas.
  • Theatres and concert halls.
  • TV studios.
  • Lecture theatres.
  • Home cinemas.
  • Existing structures.

Not currently fire rated.

Components:

  • Partition base track (contractor-supplied).
  • Wall sheet material – Generally acoustic plasterboard (contractor-supplied).
  • Base track fixings – Generally M6 mechanical anchors (contractor-supplied).
  • Farrat CineWALL LITE acoustic isolation strips, 5 mm thick.
  • Farrat CineWALL acoustic washers.
  • Structural slab, existing or contractor-supplied.

General information
Specification data - Acoustic and vibration resistant bearings
Product Reference

Partition Base Track Isolation System – Farrat CineWALL LITE

Standard product features

Wall height:

6 m (maximum).

Components:

- CineWALL LITE acoustic isolation strips:

  • Size: 1000 x 130/ 210/ 290 x 12.5 mm.
  • Installation: Allow one strip per 1 m of auditorium perimeter, plus 10% for off-cuts.

- CineWALL acoustic washers:

  • Sizing: To suit M6 fixings only, however can be used for smaller fixings with a head size <7 mm.
  • Installation: Typically fixings are used at 600 mm centres, however use as per partition manufacturer specification (Note: Extra bushes are not required if two layers are to be used).

Similar products from Farrat Isolevel Ltd