IWA 14 HVM Static Terra Comet Bollard - 3.5t At 30 mph
Application

Suitable for high security sites where there is limited foundation depth (typically inner city), however a complete HVM Perimeter is required. Also, public realm, crowded places and/ or pedestrianized areas where vehicles are not permitted. Shallow Static HVM Bollards are also used between automatic HVM products to ensure the installation meets PAS 69 installation guidance of 1.2 m maximum distance between upright faces.

Description

The Static Terra Comet Bollard is an HVM Terra Bollard which has been impact tested to the British IWA14 Specification, stopping a 3.5 tonne vehicle travelling at 30 mph.

PAS 68 Classification Code: V/7200[N2A]/48/90:3.3/-1.0. Impact tested in a set of three bollards.

A range of sleeves finishes and tops also available.

Static HVM Terra Bollards have been proven to stop vehicles, providing HVM (Hostile Vehicle Mitigation), counter terrorist, impact-resistant barriers preventing Vehicle as a Weapon attacks.

All made to order. A PSSA Verified Product, Secured by Design and are listed on the CPNI List of IWA 14 and PAS 68 products.

Applications:

Suitable for high security sites where there is limited foundation depth (typically inner city), however a complete HVM Perimeter is required. Also, public realm, crowded places and/ or pedestrianized areas where vehicles are not permitted. Shallow Static HVM Bollards are also used between automatic HVM products to ensure the installation meets PAS 69 installation guidance of 1.2 m maximum distance between upright faces.

General information

Finish

Polyester powder coated

Insert RAL colour requirement.

Material

Core: Mild (carbon) steel

Uniclass 2015

Pr_20_76_08_10 Carbon steel bollardsPrimary

CAWS

Q50/190 Bollards

Q50/30 Street furniture

Specification data - Carbon steel bollards

Product Reference

PAS 68 Static Terra Comet Bollard

Finish

Polyester powder coated

Insert RAL colour requirement.

Sleeve

Stainless steel 1.4303 (308) grade

Stainless steel 1.4401 (316) grade

Stainless steel bead blasted

Bollard Sleeve Topping

Flat

Mitre

Semi-domed

Reflective banding

None

Recessed/ Surface

Single/ Double

Standard product features

Material:

Core: Mild (carbon) steel.

Distance between uprights (maximum):

For the International IWA14-1 Impact tested bollards to be installed in accordance with IWA14-2, bollards should be installed with 1200 mm between upright bollard faces.

Lifted height/ height above ground:

700 mm.

Diameter:

219 mm.

Foundation requirements:

Embedment 300 mm.

Product Options

Finish:

Shotblasted, hot zinc sprayed, primed polyester powder coated to RAL number. This process provides a 20-year corrosion protection system for exterior, industrially polluted inland sites to BS 5493.

Third party certifications
  • TRL (Transport Research Laboratory): IWA14 impact tested
Similar products from Frontier Pitts Ltd