NBS Source
List your products
Description

FR-INS4H shutter doors are ideal for hospitals, shopping centres and various industrial applications. Unlike single skin fire shutters, the model provides radiant heat protection. Due to the construction of FR-INS4H, the radiant heat levels around the roller shutter door drop from 65 kW/m² to 2.7 kW/m². This means that even combustible materials can be stored half a metre away from a 1200°C inferno – handy if floor space is an issue. Fire crews can safely tackle the blaze right next to the door and anyone unfortunate enough to be trapped without an immediate exit can safely walk past the FR-INS4H roller shutter.

General information
Size

Insert requirements.

Uniclass 2015
Roller shutters (Pr_30_59_84_73)Primary
Specification data - Roller shutters
Product Reference

FR-INS4H

Size

Insert requirements.

Fire panel

FCP A-Spec

F-Mate

SF-01NRG

Standard product features

Shutter curtain:

Manufactured from pre-galvanized material, designed to provide a hollow section panel with fibre infill. Each section is 100 mm profiled with twin ribbed face for rigidity. The curtain, when assembled is held in position with purposely designed end fittings, which act as a curtain alignment system. The bottom panel of the shutter is terminated with a galvanized steel plate with horizontal and vertical slots.

Barrel:

Manufactured from seamless carbon steel tube to BS EN 4760 grade 50C. Maximum barrel deflection measured at 1:400, fitted with precision machined BDMS axles to BS EN 970 EN33 with end fitted plate wheel.

Main support brackets:

Main support plates for the barrel and motor unit manufactured from carbon steel. Support plates to BS EN 4360/ 43A with perimeter welded angles and structure support angles.

Vertical side guides:

Formed from pre-galvanized material having a minimum thickness of 2.5 mm. The door guide is designed to allow reduced working face and tapered inner faces to provide automatic interlock/ retaining feature.

Operation:

The door is arranged for an electric motor unit with fusible link or solenoid release unit complete with built on starter. FR-INS4H is an insulated curtain which is able to keep its unexposed face surface radiation below 20 kW/m² when applied to the time temperature curve of BS 476-20.

Manufacturing standards:

  • Fully CE marked.
  • Mechanical aspects: EN 12604, safety in use of power assisted doors.
  • Side guide protection: EN 12604-4.5.1 and EN 12453-5.1.1.3.
  • Protection: Against crushing, shearing or drawing in.
  • Electrical safety: Depending on use.
  • Watertightness: To EN 12489.
  • Resistance to windload: To EN 12444.
  • Thermal resistance: To EN 12428.
  • Air permeability: To EN 12427.
  • Opto safety edge self-monitoring: To EN 12453-5.1.1.5.
  • Anti-fall back device: To EN 12453-5.1.1.5.
  • Installation instructions: To EN 12635-4.1.1.1.
  • Durability of mechanical performance: To EN 12635-4.1.1.1.
  • Fire test: BS EN 476-22.

Radiation test:

LPC TE88517/BRE 220737.

Integrity:

240 minutes.

Irradiance:

2.7 kW/m².

Sound reduction value:

21 dB.

Product Options

Fire panel:

  • F-Mate: Will wire into the alarm and simply send the shutter up or down when alarm is triggered using a normally open, volt free signal.
  • SF-01NRG: Will wire into the fire alarm and either go up or down when the alarm is triggered. There are also lights and a 90 dB warning alarm signalling the imminent descent of the shutter. This control panel can be set on a delay.
  • FCP A-Spec: Will wire into the fire alarm and either go up or down when the alarm is triggered. There are also lights and a warning alarm signalling the imminent descent of the shutter. This control panel can be set on a delay. Comes with an emergency mushroom push button which can be pressed to temporarily send the shutter back up. Shutter will come back down after a delay.

Similar products from UK Roller Shutters Ltd