FFM 4 Wing Bi-Part Folding Door System
Verified by manufacturer 3 months ago
Folding door system.
Application
Suitable for a wide variety of applications such as: retail, hotels, offices, airports, stations, hospitals, schools, colleges, garden centres and leisure.
Description
The FFM 4 Wing Bi-Part Folding Door System is designed, constructed and installed to satisfy BS EN 16005:2012, and also complies with the Building Regulations (E&W) Approved Document M, The Equality Act 2010 and BS 8300:2009.
The system requires a minimum of installation space, yet offers maximum clearance width.
All Gilgen folding doors are supplied complete with a fail-safe system which gives up to 30 minutes operation in the event of a mains failure. The main drive unit also incorporates both an auto-reverse safety mechanism and safety stopping mechanisms.
All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.
General information
Finish | Anodized Powder-coated |
Material | Aluminium |
Warranty description | One year |
Uniclass | |
CAWS | L20/490 Automatic doors L20/55 Doorsets L20/60 Doors |
Specification data - Sliding door and partition sets
Arrangement | Bi-parting folding. |
Track system | Manufacturer guidanceDoor movement guide: Recessed floor track, helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain. |
Door leaves | |
Construction | Door profile: 40 mm thick. |
Operation | 24 V DC motor with microprocessor controller. Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals, voice message systems to assist partially sighted people and integrates with access control systems.Manufacturer guidanceDrive system: FFM drive unit incorporating both auto reverse safety mechanism and safety stopping mechanisms. Power requirements: 230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation. |
Width | Guidance for specification option: 800–1600 mm; insert requirements. |
Height | Guidance for specification option: 2500 mm (maximum); insert requirements. |
Finish | Anodized Powder-coated |
Control | Bedis hard wired control unit Six position key switch Guidance for specification option: Optional. Manufacturer guidance
|
Activation | Integration with access control systems Manual push pad Motion sensors Push-button. Pull switch. |
Speed | 0.5–0.7 m/s. |
Battery back-up | Required. Not required. |
Power | 230 V, 50/60 Hz, 13 A. Manufacturer guidancePower consumption 200 W. Static drive power maximum 150 N. |
Literature
Gilgen FFM Automatic Folding Door
Similar products from Gilgen Door Systems UK Ltd
SL35 Automatic Sliding Door Systems
SL35 PAS 24 Automatic Steel Security Door
SLX/D Hermetically Sealed Automatic Sliding Door
SRM Automatic Curved Sliding Door