Sealant based, drywall lining system.
Drywall thermal lining system that provides a simple and effective technique for drylining brick, block and concrete walls in both new-build and refurbishment work.
DriLyner RF uses Gyproc Sealant to bond plasterboard or thermal laminate boards directly to the wall.
|Uniclass 2015||Gypsum board wall lining systems (Ss_25_25_45_35)|
Gyproc sealant spots
For Gyproc Triline.
1 x 12.5 mm Gyproc WallBoard
1 x 12.5 mm Gyproc WallBoard TEN
1 x 15 mm Gyproc DuraLine
1 x 22 mm Gyproc ThermaLine BASIC
1 x 30 mm Gyproc ThermaLine BASIC
1 x 40 mm Gyproc ThermaLine BASIC
1 x 27 mm Gyproc ThermaLine PLUS
1 x 35 mm Gyproc ThermaLine PLUS
1 x 40 mm Gyproc ThermaLine PLUS
1 x 48 mm Gyproc ThermaLine PLUS
1 x 30 mm Gyproc ThermaLine SUPER
1 x 40 mm Gyproc ThermaLine SUPER
1 x 50 mm Gyproc ThermaLine SUPER
1 x 60 mm Gyproc ThermaLine SUPER
1 x 70 mm Gyproc ThermaLine SUPER
1 x 80 mm Gyproc ThermaLine SUPER
1 x 90 mm Gyproc ThermaLine SUPER
1 x 52 mm Gyproc TriLine
Taped seamless finish
Skim coat plaster finish
To receive ceramic tiles
One coat of Gyproc Drywall Primer
Two coats of Gyproc Drywall Sealer
For use where vapour control is a consideration.
Gyproc skirting plates
As a ground for fixing skirting.
Rigid beads/ stops
Gyproc nailable plugs
For secondary fixing of ThermaLine boards.
Adhesive method – Priming:
When installing Gyproc TriLine, Gyproc Sealant is applied to the board rather than the wall, in two applications. The first application of sealant blobs is flattened using a taping knife to prime the surface. Further blobs are applied over each primed area.
Gyproc nailable plugs: Insert two Gyproc Nailable Plugs per board (after the dabs have set) as secondary mechanical fixings, located within the tapered edges so that they are concealed when the system is finished, at mid height for Gyproc ThermaLine or 200 mm from the top of the board for Gyproc TriLine. Ensure plugs penetrate at least 25 mm into the background excluding the thickness of any existing plaster finishes. Drive nail heads slightly below the paper surface; do not break paper or gypsum core.