NBS Source
I'm a manufacturer

Application

Suitable for use in:

  • Prisons – perimeter sealing of cell doors and windows.
  • Prisons – sealing of fixings and sanitary ware, anti pick/ anti vandalism joints, heavy duty floor joints, tile to tile joints (no primer required), shower rooms.
  • Not recommended for structural joints.
  • Variety of internal stress relief joint systems where a tough, non-pick seal is required.

Description

Arbokol Secure is a bespoke two part epoxy sealant which cures to form a hard wearing seal, designed to accommodate small amounts of movement in extension but considerable movement in compression.


Features and benefits:

  • Where applicable, an appropriate joint filler, e.g. closed cell polyethylene foam should be used to provide the correct joint depth.
  • All joint preparation and sealant application should be carried out in accordance with BS 8000-16 (British Standard for the sealing of joints in buildings).
  • Anticipated service life in excess of 20 years.

General information

Color

Grey

White

Finish

Epoxy

Material

Epoxy

Shape

Formless

Uniclass

Pr_30_31_76_16 Construction joint sealantsPrimary

CAWS

L10/75 Sealant joints

L10/810 Sealant joints

L20/80 Sealant joints

L20/820 Sealant joints

Product range

Epoxy Sealants
Sealants and Facades

Specification data - Construction joint sealants

Material

Two part epoxy.

Colour

Grey.

Off White.

Accessories

Arbo Cleaner No. 17 (Xylene based).

Guidance for specification option:

Not suitable for use with plastics or delicate finishes.

Arbo Cleaner No. 16 (Alcohol based).

Application temperature

+10 to +40ºC.

Service temperature

-20 to +90ºC.

Cure time

48 hours at 20ºC.

Guidance for specification option:

At lower temperatures cure rate will be extended.

Shore Hardness - D

60–70 cured at 20ºC.

Chemical resistance

Resistant to most alkalis and dilute acids, petrol, diesel, jet fuel.

Anticipated service life

20 years+.

Movement

Movement accommodation: Tension 5%; compression 50%.

Joint width

6 mm (minimum single application); 20 mm (maximum single application).

Guidance for specification option:

Joint depth:

  • Porous substrates: 10 mm (minimum); 10 mm (maximum).
  • Non-porous substrates: 6 mm (minimum); 10 mm (maximum).

Manufacturer guidance

Contact Adshead Ratcliffe Technical Service Department for width: depth ratio.

Sustainability data

Country of product manufacture

United Kingdom

Similar products from Carlisle Construction Materials Limited

Arbokol 1025 SP

Arbokol 1025 SP

Arbomeric MP10

Arbomeric MP10

Arbomeric MP20

Arbomeric MP20