Aluminium fire-resistant door - ADS 80 FR 60
Verified by manufacturer 1 month ago
ADS 80 FR 60 Single leaf inward opening
ADS 80 FR 60 Single leaf inward opening
Door ADS 80 FR 60 for 60 minute fire resistance.
Application
Suitable for new build or renovation applications.
Description
Based on stable 5-chamber hollow profiles with a basic depth of 80 mm, clear openings of up to 1400 x 2488 mm can be constructed.
In addition to fire and smoke protection properties, this series also has optional burglar resistance to WK2 (RC 2), noise reduction (up to 42 dB), access control and building regulation approved fixed glazing suitable for safety barrier loading. Concealed top door closers/ pre-selectors or door hinges can also be used.
Features and benefits:
- Use of Schüco fire-resistant foam and fire-resistant joint sealing tape approved.
- Locking cams pre-assembled at the factory allow uniform and flexible installation of all fittings components in the multipurpose groove.
- Barrel hinges are easy for the fabricator to adjust.
- Door versions without fireboards make for efficient fabrication.
Standards:
- DIN EN 14351.
- DIN EN 12211.
- DIN EN 1026.
- DIN EN 1027.
- DIN EN 12211.
- DIN EN 12046.
- DIN EN 1634/1364.
- DIN EN 1191.
- DIN EN 12400.
General information
Finish | Anodized Powder-coated |
Material | Aluminium |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | L20/55 Doorsets L20/480 Doorsets |
Specification data - Aluminium doorsets
Standard | To EN 14351. |
Configuration | Single leaf inward opening. |
Doorset size | Guidance for specification option: Insert requirements, width: 610–3200 mm; height: 1725–2607 mm. Clear opening:
|
Performance | |
Fire performance | |
Fire integrity | To BS EN 1634-1, 60 minutes. |
Fire insulation | To BS EN 1634-1, 60 minutes. |
Radiation | To BS EN 1634-1, 60 minutes. |
Smoke control | To BS EN 1634-1, Class Sa / S200. |
Acoustic performance | Guidance for specification option: Insert requirements, up to 46 dB(A). |
Thermal | Guidance for specification option: Consult manufacturer and insert requirements. Frame: ≥1.9 W/m²K. |
Intruder resistance | |
Minimum requirement | Guidance for specification option: Burglar resistance; insert requirements, up to RC2. |
Frame | |
Material | Aluminium. |
Finish | |
Coating | Polyester powder-coated.Anodized. |
Texture | Manufacturer's standard. |
Colour | Manufacturer guidanceConsult manufacturer for options and insert requirements or omit for Anodized finish. |
Installation fasteners | Manufacturer guidanceConsult manufacturer for options and insert requirements. |
Frame accessories | Manufacturer guidanceConsult manufacturer for options and insert requirements or omit. |
Door leaf | |
Thickness | 80 mm. |
Core | Not applicable.Guidance for specification option: Fully glazed doors. Manufacturer's standard.Guidance for specification option: Partially or non-glazed. |
Panel details | Not applicable.Guidance for specification option: Fully glazed doors. Manufacturer's standard.Guidance for specification option: Partially or non-glazed. |
Material | Not applicable.Guidance for specification option: Fully glazed doors. Aluminium.Guidance for specification option: Partially or non-glazed. |
Glazing | |
Type | Not required.Required.Guidance for specification option: Insert requirements. Glazing up to maximum 44 mm thick, maximum panel size (w x h): 1400 x 2500 mm. |
Manifestation | Manufacturer guidanceConsult manufacturer for options and insert requirements or omit. |
Finish | |
Coating | As Frame.Polyester powder-coated.Anodized. |
Texture | Manufacturer's standard. |
External colour | As Frame.Other.Guidance for specification option: Insert requirements. |
Internal colour | As External.Other.Guidance for specification option: Insert requirements. |
Film thickness (minimum) | Manufacturer's standard. |
Door accessories | Manufacturer guidanceConsult manufacturer for options and insert requirements or omit. |
Hardware | Manufacturer guidanceConsult manufacturer for options and insert requirements. |
Accessories | Manufacturer guidanceConsult manufacturer for options and insert requirements or omit. |
Durability | Up to 1 million cycles. |
Load | To EN 1191, Class 5. Manufacturer guidanceMechanical load rating. |
Watertightness | Not required. |
Resistance to wind load | Not required. |
Fittings | Fast push-in fixing of the fittings, fixing to the building structure, location of the intumescent strips. Manufacturer guidanceMulti purpose groove. |
BIM objects
| Platform | Compatible | Version |
|---|---|---|
 Revit | - | 1 |
Literature
Schüco ADS 80 FR 60