This site uses cookies to store information on your computer. Learn more about these cookies, and how to opt out of them. Find out more
Showing 1-36 of 45
DaVinci Select Shake Fire Safety Report
Tapco Roofing Products
Fire safety report to BS EN 13501-5 : 2016
DaVinci Select Shake Fixing Guide
Tapco Roofing Products
Fixing guide details for the DaVinci Select Shake product.
DaVinci Select Shake Miami Dade Wind Uplift Testing
Tapco Roofing Products
Wind uplift testing to TAS110
DaVinci Select Shake Product Leaflet
Tapco Roofing Products
DaVinci's Select Shake roofing provides the craftsmanship
and authenticity of natural, hand-split cedar shake but
without the ongoing maintenance and upkeep of wood.
Make your dream home a reality today with Select Shake!
DaVinci Select Shake UL2218 Hail Impact Testing
Tapco Roofing Products
DaVinci Select Shake UL2218 Hail Impact Testing
Intertek UL 2218 Hail Impact Testing
Tapco Roofing Products
Hail impact testing on TapcoSlate Classic performed with varuous-sized heavy steel balls simulating 90mph hailstones.
Miami Dade Wind Uplift Testing
Tapco Roofing Products
Miami Dade TAS-110 testing to 110mph wind uplift.
Protect VP300 Membrane Brochure
Tapco Roofing Products
Protect VP300 is a medium weight vapour permeable roof underlay with a vapour resistance better than that required by BS 5250 and a strength greater than many other underlays in its class. It is suitable for all pitched roofs particularly fully supported applications. Protect VP300 is both CE marked and BM TRADA certified and provides an economic solution when the highest specification of roof underlay such as VP400 PlusLR is not required.
Protect VP300 Membrane Certificate
Tapco Roofing Products
This is to certify that the Construction Product known as: Protect VP300 Vapour Permeable Roof Underlay intended for use, within limitations, as a roof underlay in pitched roofs, under slates or tiles as a secondary weather resistant layer for protection against wind driven rain or snow, against tile wind-uplift and dust ingress.
Protect VP300 Membrane Q Mark
Tapco Roofing Products
The Q-Mark Scheme is a third-party product certification scheme operated by Exova bM TRADA Certification Ltd.
The scheme is based on the principles of ISO 9001, ISO 17065, ISO 17021 and confirms compliance with BS EN 5250 and BS EN 5534, together with a specific set of performance criteria set by Exova BM TRADA (as defined in Clause 4 of this document) in order to attain a product which performs to a high standard. The relevant standards listed above are to be read in conjunction with this document.
The scheme covers factory production control, documentation and test/assessment evidence, and the resultant certification is specific to clearly defined products and their constituent components.
Protect Wunderlay Membrane Brochure
Tapco Roofing Products
Protect Wunderlay is a lighter alternative to Protect A1 type HR roofing underlay, developed to overcome the disadvantages of traditional Type 1F and 5U felts and second generation plastic sheet materials. It has good strength and nail tear resistance and is independently certified by BM TRADA.
Protect Wunderlay provides a secondary line of defence against wind driven rain and snow and resistance to wind uplift. Being entirely waterproof it can be used as a temporary roof covering.
Protect Wunderlay Membrane Certificate
Tapco Roofing Products
This is to certify that the Construction Product known as: Protect Wunderlay Vapour Impermeable Roof Underlay intended for use as a Type HR polymeric roof underlay, in pitched roof construction under slates or tiles as a secondary weather resistant layer for protection against wind driven rain and snow, tile wind-uplift and dust ingress.
Protect Wunderlay Membrane Q Mark
Tapco Roofing Products
The Q-Mark Scheme is a third-party product certification scheme operated by Exova BM TRADA Certification Ltd.
The scheme is based on the principles of ISO 9001, ISO 17065, ISO 17021 and confirms compliance with BS EN 5250 and BS EN 5534, together with a specific set of performance criteria set by Exova BM TRADA (as defined in Clause 4 of this document) in order to attain a product which performs to a high standard. The relevant standards listed above are to be read in conjunction with this document.
The scheme covers factory production control, documentation and test/assessment evidence, and the resultant certification is specific to clearly defined products and their constituent components.
RidgeMaster Plus & HipMaster Brochure
Tapco Roofing Products
Crushproof. Bug-proof. Weather-proof. All the Proof you Need.
Efficient ventilation regardless of wind direction or speed.
Blocks out nasty weather, pesky bugs.
Sturdy, no-dent construction shrugs off falling tree branches, hammer strikes.
Accommodates fiberglass and organic shingles, composite tiles, wood, slate or metal systems; residential or commercial; new construction or re-roofing.
Meets or exceeds all major building code standards.
Easy, smooth installation with nailing and shingle alignment guides.
RidgeMaster Plus & HipMaster Fixing Guide
Tapco Roofing Products
The RidgeMaster Plus ridge ventilator system and HipMaster hip ventilator system are suitable for roof pitches of between 14° and 45°.
We recommend RidgeMaster Plus 11" (279mm) to meet your ridge ventilation requirements and HipMaster 11" for your hip ventilation requirements.
Tapco Abutment Vent Fixing Guide
Tapco Roofing Products
This vent is suitable for roof pitches of 20° and above. if required below this pitch, please contact our technical services department.
Tapco Abutment Vent Technical Guide
Tapco Roofing Products
The Tapco Abutment Ventilator (TABV) provides unobtrusive high-level ventilation and can be used in conjunction with traditional lead roll details on slate and shake roofs. It is also particularly useful in top edge abutment situations where installation is limited due to vertical clearances.
Tapco Cowl Vent Fixing Guide
Tapco Roofing Products
Universal cowl soaker slate ventilators are suitable for roof pitches of between 15° and 60°. For pitches above and below this please contact our technical department.
Tapco Dry Verge Data Sheet
Tapco Roofing Products
The Tapco Slate Dry Verge System permanently secures slate applications on gable ends protecting the verge from wind uplift and rain.
The Slate Dry Verge System can be used with both interlocking slates and double lap natural or fibre cement slates.
The components are manufactured from high durability extruded and injection moulded UV inhibited PVC-U.
Tapco Dry Verge Fixing Guide
Tapco Roofing Products
The Continuous Slate Dry Verge System is designed for use with most natural and man-made slates. The system for TapcoSlate Classic fits slate up to a maximum 6mm in thickness.
The Slate Dry Verge System is fitted to the top end of the battens and forms a fixing for the slate whilst covering the end of the battens.
Expansion joints are provided and the following instructions should be followed to avoid possible buckling or breaking during periods of hot or cold weather
Tapco Eaves Ventilation Kits Fixing Guide
Tapco Roofing Products
The fascia board should be fixed lower than normal to allow for the ventilator, 15mm for the 10mm system and 27mm for the 25mm system.
Attach the selected ventilator to the top edge of the fascia board ensuring each vent is connected to the adjacent unit.
Tapco Inline Vent Fixing Guide
Tapco Roofing Products
The ventilator has a non-nailable area, nailing into this area will cause irreparable damage to the unit. To help with the installation of this product, a piece of card or paper can be cut to sit around the central vent to use as a guide when securing the relevant TapcoSlates around it onto the battens.
Tapco Rafter Roll Ventilator Fixing Guide
Tapco Roofing Products
Attach one piece of the Roll Ventilator by placing the end square corrugation over the rafter and fixing with staples or nails.
The ventilator should be placed to ensure the airflow from the soffit area is not restricted by the roof insulation.
By lightly stretching the roll along its length, the square corrugations will fall into line automatically with rafters at 400mm and 600mm centres and can easily be extended to suit 450mm centres.
Tapco Roofing Products 40-year Warranty
Tapco Roofing Products
Tapco Europe Limited (TAPCO) warrants to whichever of the Contractor and the Customer is the original purchaser (and to the Customer or any other party to whom the original purchaser transfers ownership as permitted in this document (a Permitted Transferee)) that the Tapco Roofing Products to which this warranty applies (i.e. only those TAPCO products that are branded as TapcoSlate or TapcoShake and that are sold and purchased in the European Union, collectively referred to in the remainder of this document as the Products) will be free from manufacturing defects resulting in warping, cracking, splitting, rotting, peeling, flaking and blistering when subject to normal use for a period of forty (40) years from the date of supply
Tapco Roofing Products Brochure
Tapco Roofing Products
Whether you have a modern home or historic mansion, TapcoSlate Classic
Roofing adds splendour, elegance, and tradition. Classic Slate not only brings
beautiful classic style to your home, it is authentically shaped and has textured
surfaces and edges. This makes Classic Slate virtually indistinguishable from
natural slateyet it has an even more refined appearance. Classic Slate will not
break or delaminate either, standing the test of time better than natural slate.
TapcoSlate Classic Accessories
Tapco Roofing Products
A range of recommended, purpose-built accessories to complement your TapcoSlate roofing projects. Built from either polypropene/limestone, or from painted-to-colour ABS, these roofing accessories are made to last!
TapcoSlate Classic BBA Certificate
Tapco Roofing Products
This Agrément Certificate Product Sheet(1) relates to TapcoSlate, a range of polypropylene compound-moulded
roof tiles used to provide a weatherproof finish to pitched timber roofs with a rafter pitch of 14° and over, in accordance with BS 5534 : 2014.
TapcoSlate Classic Care & Maintenance
Tapco Roofing Products
N.B. Staining can often appear on a roof if leadwork has not been treated with patination oil, and the resultant deposit following rainfall runs down the roof, marking the tiles. The application of patination oil should be done at the same time as the roofing/leadwork.
TapcoSlate Classic Chemical Compatibility
Tapco Roofing Products
Tapco Roofing Products' roof tiles are chemically compatible with most substances and products which are normally present in a roof deck environment. Our roof tiles will not react adversely when exposed to acids, bases and salts. They are also compatible with EPDM, PVC, Uncured Neoprene, and asphalt compounds that are typically present in roofing underlay and self-adhered
membranes.
TapcoSlate Classic Coachman Mix
Tapco Roofing Products
Why have ordinary when you can have a roof that stands out from the crowd? Our new Coachman Mix is just the WOW! factor your home needs. With all the benefits of our TapcoSlate Classic tiles, Coachman bundles a mix of three complementary colours formulated to replicate the subtle, beautiful colour variations of a natural slate roof but with the ease of fixing and maintenance that TapcoSlate Classic provides. This simply stunning mix is now stocked in our UK warehouse to adorn your project today!
TapcoSlate Classic Conservatory
Tapco Roofing Products
Not only does your conservatory roof have to keep out the harsh elements, but it also has to look great too! With its outstanding, natural looks, low waste and unbreakable qualities, Classic Slate has always been a perfect fit for conservatories. It is easy to install, easy to cut and shape, and its 40-year warranty gives you the peace-of-mind needed from a company that has been trading since 1961. Classic Slates 16 different tile moulds make sure that your roof has a natural, non-repeated look, just like natural slate, but at a quarter of the weight saving costs on materials and installation times.
TapcoSlate Classic ETA Certificate
Tapco Roofing Products
European Assessment document (EAD) no. European Assessment Document 22006-00-0402 for Roofing slates made of polypropylene, limestone and fillers.
TapcoSlate Classic Features & Benefits
Tapco Roofing Products
COMPOSITION AND MANUFACTURING
Advanced composite polymer blend UV inhibitors, blockers and absorbers, achieving an extremely LOW-MAINTENANCE product.
Colours are vibrant and controlled by using a blend of 100% virgin resins and limestone.
State-of-the-art moulding process produces a unique natural slate appearance on each tile.
A more natural colouring is created by blending-in colour during the forming process.
TapcoSlate Classic Fixing Guide
Tapco Roofing Products
For felt and batten roofs, start by fixing battens minimum size of 2" (50mm) by 1" (25mm) treated battens over underlay to the required gauge. The first course and eaves (starter) course should oversail the fascia by at least 1½" (38mm), so the first course batten should be placed approximately 7½" (190mm) centrally from the start of the roof (see diagram). A second batten should then be placed directly under the first course batten to accommodate the eaves or starter course (made from a cut ¾-slate).
TapcoSlate Classic Marketing Materials
Tapco Roofing Products
The following items are available FREE OF CHARGE to help with customer marketing activities.
TapcoSlate Classic Modular Homes
Tapco Roofing Products
With its outstanding, natural looks, low waste and unbreakable qualities, Classic Slate is perfect for modular construction. It can withstand the movement of being transported over distance where other roofing products crack and break. Classic Slate is easy to install, easy to cut and shape, and with its 40-year warranty is easy to love. Its 16 different tile moulds make sure that your roof has a natural, non-repeated look, just like natural slate, but at a quarter of the weight saving costs on materials and installation times.
Showing 1-36 of 45