SMET Building Products Ltd

Smet Supported Partners, Plastering Contractors (Stanmore) Limited, completed the floor screed application of 14,000 m2 of innovative SMET LiteFlo® Lightweight Flowing Screed in the iconic final phase of the acclaimed Great West Quarter, in Brentford, West London. SMET LiteFlo® Lightweight Flowing Screed is a high quality pumpable, factory-produced, CE marked, self-levelling screed based on calcium sulphate. German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available.

We supplied Integrated Flooring Technologies with 2,000m2 SMET LiteFlo® Lightweight Flowing Screed for the new-build hotel in Torpichen Street in Edinburgh. The product supplied helped our Smet Supported Partner, to deliver for the principal contractor, Ogilvie Construction, a high-quality pumpable, CE marked, self-levelling screed based on calcium sulphate.German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates – means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.Innovative SMET LiteFlo® is particularly suitable and absolutely ideal for application in high-rise buildings, over timber-suspended floors, timber-frame houses, and in new builds and renovations. LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.Have a look at the Northern Builder MagazineTop 5 Liquid Screeds Article.  Read about SMET LiteFlo® in the Irish Construction News.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET has a flooring compound or ready to use product suitable for your application.www.smetbuildingproducts.com or www.smet.ie

SMET supplied 20,000m2 of superior-quality Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services, for the flooring solution in the new hospital complex, The National Forensic Mental Health Service (NFMHS) in Portrane.The NFMHS is a new state-of-the-art facility located 22 km from Dublin City in Portrane, North County Dublin. The project was awarded by Health Service Executive to the Joint Venture formed by OHL (50%) and OHL’s local delivery partner JJ Rhatigan (50%).German-made Rapidur® B5 Rapid Drying Screed Binder is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation, and for laying to falls.  Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds, and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after the achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet.Key features of Rapidur® B5:• Ready for tiling after only approx. 3 days• Achieves grade CT-C45-F7 after 28 days*• Pumpable• For fast-track or tightly scheduled screed laying and laying to falls• Suitable for floor heating systems• Long working life: approx. 2–3 hours• May be applied in mixing ratios 1:4 and 1:5• High resistance to moisture migration from the substrate• Suitable for renovation and refurbishment schemes• EMICODE system of GEV (German Association for control of Emissions in Products for Flooring Installation): EC1PLUS R (‘very-low-emission-plus’) rating• For indoor and outdoor useSMET delivers another innovative, showcase flooring solution to their Smet Supported Partners. Click the link to see a showcase of jobs recently completed by expert screeder, Brendan Doherty Screeding Services.

We supplied 24,000m2 screed binder to our Smet Supported Partner, Fast Floor Screed Ltd. The industry experts pump-applied Südanit 280 Alpha Hemihydrate Screed using their fleet of Mobile Screed Factories in the new hospital complex, The National Forensic Mental Health Service (NFMHS) in Portrane. We supplied 20,000 m2 Rapidur® B5 Rapid Drying Floor Screed which was laid by industry experts, B Doherty Screeding Mobile Screed Factory).The NFMHS is a new state-of-the-art facility located 22 km from Dublin City in Portrane, North County Dublin. The project was awarded by Health Service Executive to the Joint Venture formed by OHL (50%) and OHL’s local delivery partner JJ Rhatigan (50%).The project, which commenced works on site in 2017, comprises the construction of a forensic mental health hospital, as part of St. Ita’s Hospital complex. It covers a floor area of 24,000 m2, not including the energy, maintenance, and gardening buildings. The new hospital will accommodate 170 patient beds, distributed as follows: National Forensic Hospital: 120 beds; Mental Health Unit for Children and Adolescents: 10 beds; Intellectual Disability and Mental Health Unit: 10 beds; and the Intensive Care Rehabilitation Unit: 30 beds. The construction project also includes the execution of spaces related to energy production systems, maintenance, and horticulture.

New floor installation with fast-track – rapid drying floor screed solution, allowing early final flooring installation. SMET supplied Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services, approximately 500 m2, for the flooring renovation and repair in Queen’s University Belfast, School of Law new extension. B Doherty Screeding Services completed the flooring project on behalf of lead contractor Felix O’Hare & Co.Ltd.Y SMETGerman-made Rapidur® B5 Rapid Drying Screed Binder is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation. Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after the achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet. SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners. Click the link to see a showcase of jobs completed by Brendan Doherty Screeding Services.

baseTherm® PROJECT Contact your local team baseTherm® for these amazing floor insulation results:📞+353 (0) 87 333 0683📞+353 (0) 87 223 2456📩 sales@basetherm.com📲basetherm.comClick here to view more finished jobs on our GALLERY:https://lnkd.in/e9zh-nwxbaseTherm® is an NSAI Agrément certified BEPS liquid floor insulation, complete with its own EPD.It's produced and installed on-site by our local team using our Mobile Floor Insulation Factory - without waste or fuss.💡baseTherm® KEY BENEFITS:👉 Seamless, void-free poured floor insulation👉 Factory-produced on-site, without waste - using our Mobile Floor Insulation Factory👉 Rapid pumped installation👉 Non-combustible👉 Ultra-lightweight with acoustic benefits👉 Highly insulating, from 0.041 W/mK👉 National Standards Authority of Ireland (NSAI) Agrément certified👉 EPD Certified – available to download on Irish Green Building Council's platform EPD Ireland👉 Available for spec on NBS Source and as BIM Digital Objects

baseTherm® is produced and installed on-site by our local team using our Mobile Floor Insulation Factory - without waste or fuss.�baseTherm® KEY BENEFITS: � Seamless, void-free poured floor insulation� Factory-produced on-site, without waste - using our Mobile Floor Insulation Factory� Rapid pumped installation� Non-combustible� Ultra-lightweight with acoustic benefits� Highly insulating, from 0.041 W/mK� National Standards Authority of Ireland (NSAI) Agrément certified � EPD Certified – available to download on Irish Green Building Council's platform EPD Ireland� Available for spec on NBS Source and as BIM Digital ObjectsContact your local team baseTherm® for amazing insulation results:�+353 (0) 87 333 0683�+353 (0) 87 223 2456� sales@basetherm.com�basetherm.comClick here to view more finished jobs on our GALLERY:https://lnkd.in/e9zh-nwx#EPD #basetherm #BEPS #pouredinsulation #insulation #koreinsulation #liquidfloorinsulation #floorinsulation #beadscreed Fast Floor Screed Ltd Eddie Hussey Smet Building Products Limited KORE Insulation NBS

👉 Client: Rathcorbally Construction👉 Insulation: baseTherm® 200👉 Floor Screed: Sudanit 280 Alpha Hemihydrate Floor Screed over UFH👉 Floor area: 880 m2baseTherm® is:👉 Seamless & void free👉 Without heat loss or cold bridges👉 Full encapsulation of services👉 No surplus & no waste👉 Levels the substrate = even thickness of screed👉 Even screed thickness = uniform heat

Job: Bray Medical Centre for Collen ConstructionSmet Supported Partner: B Doherty Screeding ServicesProduct:Sopro Rapidur® B5 Rapid Drying Screed BinderRelated Downloads:TDS Sopro Rapidur® B5 Rapid Drying Floor Screed BinderSMET Floor Screeds and Compounds Product SelectorDescriptionSMET supplied Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services, for the flooring solution in this fast track in Bray Medical Centre. B Doherty Screeding Services completed the flooring project on behalf of lead contractor Collen Construction.German-made Rapidur® B5 Rapid Drying Screed Binder is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation, and for laying to falls.   is suitable for use on heated screeds, bonded screeds, unbonded screeds, and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet.

We supplied Sopro SLC 578 – Self Levelling Compound for this new hard-wearing, super-flat floor in the Newry-based Cottage Dog Grooming & Day Care Newry, County Down.  Sopro SLC 578, supplied by Smet Building Products Ltd is a pumpable, self-levelling, rapid-set, cementitious surface filler, and can be used in conjunction with floor heating internally. Sopro SLC 578 is a pumpable, self-levelling, rapid-set leveller which is great for a quick turn-around, self-build job like this.

SMET NHL 3.5 binder was specially selected for the restoration works in Dechomet Cemetry, Moneyslane.  Rainey Restoration Ltd used our superior-quality pure Natural Hydraulic Lime binder SMET NHL 3.5 to produce a superior-quality lime mortar. The selective hydraulic strength development of NHL binders makes them particularly suitable for producing lime mortars for masonry work, rendering, and plastering on historical buildings and monuments.NHL binders, available directly from SMET and online or in-store via our distribution partner Haldane Fisher, are particularly suited for ecological new builds, conservation, restoration, and preservation works. The products’ special composition allows mortars to breathe and permits constant hygrometric exchange between the substrate and the environment. This Restoration is another showcase of sympathetic historic building restoration, using superior-quality NHL products available from SMET.

SMET NHL 3.5 binder was specially selected for the restoration of the Donegal Parish Church.  Rainey Restoration Ltd selected our superior-quality pure Natural Hydraulic Lime binder SMET NHL 3.5 to produce a superior-quality lime mortar. The selective hydraulic strength development of NHL binders makes them particularly suitable for producing lime mortars for masonry work, rendering, and plastering on historical buildings and monuments. Rainey completed a full restoration program on the Donegal Parish spire and tower with all masonry joints being raked out and repointed with this hydraulic lime mortar. In addition, there were a number of stone indents, stone replacements, and stone repairs.NHL binders, available directly from SMET and nationwide online or in-store via our distribution partner Haldane Fisher, are particularly suited for ecological new builds, conservation, restoration, and preservation works. The products’ special composition allows mortars to breathe and permits constant hygrometric exchange between the substrate and the environment. This restoration is another showcase of sympathetic historic building restoration, using superior-quality NHL products available from SMET.

A fine cooperation from our clients - the floor screed specialists at B Doherty Screeding Ltd | Mobile Screed Factory along with baseTherm® Ltd Liquid Floor InsulationProjectDCU Polaris Building | School of Health & Human PerformanceMain ContractorWalls & McKeown Joint Venture Floor Screed PackageB. Doherty Screeding & baseTherm® Joint VentureVoid Former500 m³ baseTherm® 200, supplied and installed by baseTherm®Floor Screed3,500 m² Rapidur® EB5 Floor Screed by ourselves B. Doherty Screeding LtdContact your professional baseTherm® team for efficient, fuss-free, floor insulation results: 🔥📞Philip +353 (0) 87 333 0683📞Eddie +353 (0) 87 223 2456📩 sales@basetherm.comFor stunning floor screed results give B Doherty Floor Screed a call:📞 +353 (0)74 9383654📱 +353 (0)86 6031230📧 info@bdohertyscreeding.com

Tricky floor refurb? Our Smet Supported Partner, contractor, Ciaran McAteer uses a practical solution for the professional flooring contractor or tiler.  VS 582 is a self-levelling smoothing screed with excellent mouldability for laying to falls. A flexible, self-levelling, mouldable, rapid-set, cementitious, fibre-reinforced surface filler, with 2-in-1 formulation for simultaneous levelling and creation of falls. Excellent workability and mouldability because you also have the flexibility of adding water.It’s strong, with a compressive strength after 28 days: approx. 35 N/mm² (as levelling coat laid to falls), dries quickly and is pumpableBenefits of Sopro VS 582:3 – 70 mm coat thickness For floors, indoors and outdoors2-in-1 formulation: suitable as self-levelling filler and for laying to fallsCompressive strength after 28 days: approx. 35 N/mm² (as levelling coat laid to falls)Flexural tensile strength after 28 days: approx. 7 N/mm² (as levelling coat laid to falls)Self-levellingOutstanding mouldability when laid to fallsQuick-dryingFlexible, fibre-reinforcedPumpableSuitable for timber flooringSuitable for floor heating systemsLong working life: 30 – 40 minutesWalkable after 2 – 3 hoursNo client is too large or too small, SMET delivers another innovative, showcase flooring solution. Click here at other jobs using our Sopro levellers.SMET is renowned for its comprehensive range of professional CE marked, EPD certified products. The SMET flooring range includes; calcium sulphate-based screed binders, self-smoothing calcium sulphate-based screeds & compounds, cement-based screed binders, self-smoothing cement-based screeds, lightweight flowing screeds, professional tiling materials & tools, tanking and wet-room solutions, barrier coats, primers & bonding agents; for any domestic, commercial, industrial or design-flooring use.Suffice to say, the SMET product portfolio includes a German-made floor solution for any new or repair flooring requirement. Get in touch for your upcoming floor screed or tiling project.

DescriptionSmet Supported Partner, B Team Shopfitters machine applied the LIDL External Render System onto Poroton blocks externally using as Base Coat: Bauprotec 850 M – Lightweight Lime Cement Render and as Finish Coat; Mineral Finish Coat K.  As Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete and insulated plinths: Bauprotec RHS Multi-Purpose Render with the addition of Bauprotec SLP for plinths.The Internal Render System specification onto Poroton blockwork consists of a base of Coat: Bauprotec 850 M, Lightweight Lime Cement Render, sponge floated in warehouse areas, and skim finished in sales areas. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS is used.The LIDL render spec, available from SMET consists of:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.Mineral Finish Coat – K is a CE marked, factory-produced mineral-based, high-quality finish-coat render, specially designed for hand and machine application to EN 998-1, 2010.Bauprotec SLP is a CE Marked, factory-produced Lightweight Sand & Cement Render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are key factors in choosing SMET. SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI.  If you’d like to speak to us about your Lidl job – contact SMET.All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.Related DownloadsTDS CASEA Bauprotec 850 M – Lightweight Lime Cement RenderTDS CASEA Bauprotec RHS – Multi-Purpose RenderTDS CASEA Bauprotec SLP Tanking and Plinth RenderTDS CASEA Mineral Finish Coat – KSMET Render and Plaster Product Selector

Job: New Lidl Store, BlythSmet Supported Partner: Plunkett Tiling ContractorsSMET Product Used: Sopro RS 648 Vibration SlurryRelated DownloadsTDS Sopro RS 648 Vibration SlurrySmet Professional Tiling Systems BrochureDescriptionSopro RS 648 Vibration Slurry was selected for the LIDL tiling system method of vibro-compaction fixing of porcelain floor tiles, in the Blyth LIDL. Smet Supported Partner, Plunkett Tiling Contractors, selected the superior quality German-made, RS 648 Vibration Slurry, for its flexibility as a bonding slurry for the installation of stone and ceramic coverings, making it ideal for use in vibrated floor systems (or indeed conventional methods).In preparing the floor to LIDL spec, the floor screed is placed, struck off to required levels, and pre-compacted using a straight edge. The bonding layer, namely Sopro RS 648 vibration slurry is applied to prepared and pre-compacted floor screed and ceramic tiles are immediately placed with tightly butted joints to LIDL spec.After installation of a vibratable area (10 – 20 m², depending on situation/ambient conditions and resultant setting behaviour of floor screed), a surface vibrator is passed over floor covering and tiles vibrated into adhesive bed. When sufficiently set, hardened and bonded joints are grouted*.Sopro RS 648 Vibration Slurry is a one-component, fibre-reinforced, polymer-modified, trass-bearing, cementitious bonding and contact slurry. Applied as flexible bonding slurry for installation of stone and ceramic coverings using vibrated floor system or conventional methods. It’s ideal for slurry application technique. Sopro RS 648 is particularly suitable for laying tiles with low water absorption (fully vitrified stoneware). For laying large-format units (30 cm × 60 cm) using vibrated floor system. Also, it can be used as slurry-applied bonding layer on substrates and on bedding adhesive.The product's special properties and SMETs superior technical backup, are key factors in choosing Sopro RS 648 Vibration Slurry. Smet Building Products Ltd is committed to delivering high-quality products to the construction of LIDL stores.For more info on our range of SMET Professional Tiling Products.*We always recommend grouting with Sopro FL 526 Flexible Tile grout in the required colour.

DescriptionSoldi Investments completed the new Lidl store in Chichester, West Hampnett Road.  Soldi Investments machine applied the LIDL External Render System onto Poroton blocks externally using as Base Coat: Bauprotec 850 M – Lightweight Lime Cement Render and as Finish Coat; Mineral Finish Coat K. As Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete and insulated plinths: Bauprotec RHS Multi-Purpose Render with the addition of Bauprotec SLP for plinths.For the internal Poroton walls Smet One Coat Projection Plaster was used at a thickness of 15mm. One Coat Projection Plaster Hard Coat is a factory-produced hard coat One Coat Gypsum Plaster designed for machine application produced to EN 13279-1. It is manufactured from a controlled blend of selected gypsum and other components to give a high-quality, high-strength plastering product that is suitable for use in internal plastering.The LIDL render spec, available from SMET consists of:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.Mineral Finish Coat – K is a CE marked, factory-produced, mineral-based, high-quality finish-coat render, specially designed for hand and machine application to EN 998-1, 2010.Bauprotec SLP is a CE Marked, factory-produced Lightweight Sand & Cement Render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are key factors in choosing SMET.SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI.  If you’d like to speak to us about your Lidl job – contact SMET. All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.

Sopro RS 648 Vibration Slurry was selected for the LIDL method of tiling which consists of compact-vibration floor tile fixing, in the new LIDL store in Bently, Doncaster. Smet Supported Partner, Core PIC Ltd, selected the superior quality German-made, RS 648 Vibration Slurry for its flexibility as a bonding slurry in the installation of stone and ceramic tiles, making it ideal for using in vibrated floor systems (or indeed conventional methods). The tiling was carried on on behalf of main contractor PDR Construction.In preparing the floor to LIDL spec, the floor screed is placed and struck off to required levels and pre-compacted using a straight edge. The bonding layer, namely Sopro RS 648 vibration slurry, is applied to prepared and pre-compacted floor screed and ceramic tiles are immediately placed with tightly butted joints to LIDL spec.After installation of a vibratable area (10 – 20 m², depending on situation/ambient conditions and resultant setting behaviour of floor screed), a surface vibrator is passed over floor covering and tiles vibrated into the adhesive bed. When sufficiently set, hardened and bonded joints were grouted with Sopro FL 526 Flexible Tile grout.Sopro RS 648 Vibration Slurry is a one-component, fibre-reinforced, polymer-modified, trass-bearing, cementitious bonding and contact slurry. Applied as flexible bonding slurry for installation of stone and ceramic coverings using vibrated floor system or conventional methods. It’s ideal for slurry application technique. Sopro RS 648 is particularly suitable for laying tiles with low water absorption (fully vitrified stoneware). For laying large-format units (30 cm × 60 cm) using vibrated floor system. It can also be used as slurry-applied bonding layer on substrates and on bedding adhesive.Sopro FL 526 Flexible Tile Grout is a flexible, trass-bearing, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13 888. Suitable for grouting ceramic, fully vitrified stoneware, natural and cast stone coverings and glass block assemblies. Rapid set for low-suction tiles, with specially tailored joint-filling properties and first-rate washability (removability). Particularly suitable for balconies, patios and in conjunction with floor heating systems (UFH).The product’s special properties and SMET’s superior technical backup, are key factors in choosing Sopro RS 648 Vibration Slurry and Sopro FL 526 Flexible Tile Grout. Smet Building Products Ltd is committed to delivering high-quality products to the construction of LIDL stores.For more info on our range of SMET Professional Tiling Products.PDR built the new LoF (Lidl of the future) store in Bentley Doncaster. The 23,000 sq/ft store with its striking design will help to increase Lidl’s market share and see their profits continue to rise in the UK. The Bentley store will be PDR’s 10th new build store for Lidl.Related DownloadsTDS Sopro RS 648 Vibration SlurryTDS Sopro FL 526 – Flexible Tile GroutSmet Professional Tiling Systems Brochure

Smet Supported Partner, Adston Construction, machine applied the LIDL External Render System onto Poroton blocks consisting of a Base Coat of Bauprotec 850 M – Lightweight Lime Cement Render, Façade System Primer and a Finish Coat of Mineral Finish Coat. The Plinth Render used is Bauprotec SLP – Lightweight Plinth and Tanking Render. Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete: Bauprotec RHS was used.The Internal Render System specification onto Poroton blockwork consists of Single Coat: Bauprotec 850 M, Lightweight Lime Cement Render. A smooth finish is required in the sales area, so either 850M steel trowelled smooth or skim finished. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS used.The LIDL render system, available from SMET:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.Mineral Finish Coat – K is a CE marked, factory-produced, mineral-based, high-quality finish-coat render, specially designed for hand and machine application to EN 998-1, 2010.CASEA Bauprotec SLP is a CE Marked, factory-produced Lightweight Sand & Cement Render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are key factors in choosing SMET. SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering Contractors across the UK and ROI. If you need to speak to us - click to contact SMET.All LIDL spec SMET Render System products are available from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.

Smet Supported Partner, NRS Group machine applied the LIDL External Render System onto Poroton blocks externally using as Base Coat: Bauprotec 850 M - Lightweight Lime Cement Render, and as Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete and insulated plinths: Bauprotec RHS Multi-Purpose Render.The internal Render System specification onto Poroton blockwork consists of a base of Coat: Bauprotec 850 M, Lightweight Lime Cement Render, sponge floated in warehouse areas and skim finished in sales areas. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS is used.SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI.If you'd like to speak to us about your Lidl job - contact SMET on.All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.

DescriptionLocal Smet Supported Partner, a seasoned Lidl Contractor, McCallion Group machine applied the LIDL External Render System onto Poroton blocks externally using as Base Coat: Bauprotec 850 M – Lightweight Lime Cement Render, and as Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete and insulated plinths: Bauprotec RHS Multi-Purpose Render.The internal Render System specification onto Poroton blockwork consists of a base of Coat: Bauprotec 850 M, Lightweight Lime Cement Render, sponge floated in warehouse areas, and skim finished in sales areas. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS is used.The Irish LIDL render spec, available from SMET consists of:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and the Smet Supported Partner superior technical backup, are key factors in choosing SMET.SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI.  If you’d like to speak to us about your Lidl job – contact SMET.All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.Related DownloadsTDS CASEA Bauprotec 850 M – Lightweight Lime Cement RenderTDS CASEA Bauprotec RHS – Multi-Purpose Render

Smet Supported Partner, Hargreaves Group contracted to M2 Plastering, machine applied the LIDL External Render System in Waterlooville onto Poroton blocks externally using as Base Coat: Bauprotec 850 M – Lightweight Lime Cement Render and as Finish Coat; Mineral Finish Coat K.  As Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete and insulated plinths: Bauprotec RHS Multi-Purpose Render with the addition of Bauprotec SLP for plinths.The Internal Render System specification onto Poroton blockwork consists of a base of Coat: Bauprotec 850 M, Lightweight Lime Cement Render, sponge floated in warehouse areas and skim finished in sales areas. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS is used.The LIDL render spec, available from SMET consists of:Bauprotec 850 M is a factory produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.Mineral Finish Coat – K is a CE marked, factory-produced mineral-based, high-quality finish-coat render, specially designed for hand and machine application to EN 998-1, 2010.Bauprotec SLP is a CE Marked, factory-produced Lightweight Sand & Cement Render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are key factors in choosing SMET.SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI.  If you’d like to speak to us about your Lidl job – contact SMET.All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, who ensures the contractor has a superior level of technical back up in the machine application of the LIDL specification.

DescriptionLocal Smet Supported Partner, master builders NRS Group Construction, machine-applied the LIDL External Render System onto Poroton blocks externally using as Base Coat: Bauprotec 850 M – Lightweight Lime Cement Render, and as Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete and insulated plinths: Bauprotec RHS Multi-Purpose Render.The internal Render System specification onto Poroton blockwork consists of a base of Coat: Bauprotec 850 M, Lightweight Lime Cement Render, sponge floated in warehouse areas, and skim finished in sales areas. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS is used.The Irish LIDL render spec, available from SMET consists of:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and the Smet Supported Partner’s superior technical backup, are key factors in choosing SMET. SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI.  If you’d like to speak to us about your Lidl job – contact SMET.All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, who ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI.  If you’d like to speak to us about your Lidl job – contact SMET.

We supplied our partner, Fast Floor Screed Ltd with SMET LiteFlo® Lightweight Flowing Screed for the first floor of a timber frame house. This lightweight screed is ideal for renovation projects where loading is an issue. This is a high quality pumpable, factory-produced, CE marked, self-levelling screed based on calcium sulphate. German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates – means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.Innovative SMET LiteFlo® is particularly suitable for use in timber-frame builds, suspended timber floors, tower blocks, apartments, and high-rise buildings. SMET demonstrates best practice in construction partnerships – providing a superior level of customer service to their Smet Supported Partners during the installation process.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET have a flooring compound or ready to use product suitable for your application.www.smetbuildingproducts.com or www.smet.ie

TDS SMET LiteFlo® Lightweight Flowing Screed Aftercare SMET LiteFlo® Lightweight Flowing ScreedEPD – LiteFlo® Lightweight Flowing ScreedWe supplied our Smet Supported partner, Floor Screed Ireland with SMET LiteFlo® Lightweight Flowing Screed for the Our Lady of Hope special school in Crumlin. The job was completed by Floor Screed Ireland on behalf of Vision Contracting for the Dept of Education. This lightweight screed is ideal for renovation projects where loading may be an issue. This is a high-quality pumpable, factory-produced, CE marked, self-levelling screed based on calcium sulphate. German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates - means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.Innovative SMET LiteFlo® is absolutely ideal for application in high-rise buildings, over timber-suspended floors, timber-frame houses, and in new builds and renovations.LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.Have a look at the Northern Builder MagazineTop 5 Liquid Screeds Article.  Read about SMET LiteFlo® in the Irish Construction News.Check out SMET lightweight screed, lightweight flooring systems, and aggregates (void fillers) suitable for any building project. We demonstrate best practice in construction partnerships - providing a superior level of customer service to our Smet Supported Partners during the installation process.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET has a flooring compound or ready to use product suitable for your application.

Smet Supported Partners, Capel (CS) Ltd, completed the floor screed application of SMET LiteFlo® Lightweight Flowing Screed within the improvement works at Harold Wood Station.  A number of improvements were delivered at Harold Wood station in preparation for the new Elizabeth line service, including:A new footbridge over the tracks with new staircasesThree new lifts to provide step-free access to every platformPlatform extensions to accommodate the new, 200m long Elizabeth line trainsNew platform lightingNew station signage, help points, customer information screens, and CCTV.SMET LiteFlo® Lightweight Flowing Screed is a high-quality pumpable, factory-produced, CE marked, self-levelling screed based on calcium sulphate.German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates - means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.German-made LiteFlo® is unique, in that it’s the first pumpable lightweight flowing screed. Made from specially selected aggregates, makes it 30% lighter than conventional flowing screeds and therefore 70% lighter than traditional sand & cement – ultimately this means less is required per m2. Another plus is that that screed made from Calcium Sulphate has naturally substantially lower embodied carbon emissions than a sand and cement screed. LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.Have a look at the Northern Builder MagazineTop 5 Liquid Screeds Article.  Read about SMET LiteFlo® in the Irish Construction News.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET has a flooring compound or ready to use product suitable for your application.www.smetbuildingproducts.com or www.smet.ie

We supplied our partner, Fast Floor Screed Ltd with SMET LiteFlo® Lightweight Flowing Screed for the renovation job in Fleet Screed in Dublin city. This is a high-quality pumpable, factory-produced, CE marked, self-levelling screed based on calcium sulphate.German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates – means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.Innovative SMET LiteFlo® is particularly suitable for use in timber-frame builds, suspended timber floors, tower blocks, apartments, and high-rise buildings.LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.Have a look at the Northern Builder MagazineTop 5 Liquid Screeds Article.  Read about SMET LiteFlo® in the Irish Construction News.SMET demonstrates best practice in construction partnerships - providing a superior level of customer service to their Smet Supported Partners during the installation process.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET has a flooring compound or ready to use product suitable for your application.www.smetbuildingproducts.com or www.smet.ie

We supplied B. Doherty Screeding with SMET LiteFlo® Lightweight Flowing Screed for the new build in Harold’s Cross in Ireland. The product supplied helped our Smet Supported Partner, B. Doherty Screeding to deliver the project as a high-quality pumpable, CE-marked, self-levelling screed based on calcium sulphate.German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates – means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.Innovative SMET LiteFlo® is particularly suitable for use in timber-frame builds, suspended timber floors, tower blocks, apartments, and high-rise buildings. SMET demonstrates best practice in construction partnerships – providing a superior level of customer service to their Smet Supported Partners during the installation process.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET has a flooring compound or ready to use product suitable for your application.TDS SMET LiteFlo® Lightweight Flowing ScreedAftercare SMET LiteFlo® Lightweight Flowing ScreedSMET Floor Screeds and Compounds Product Selectorwww.smetbuildingproducts.com or www.smet.ie

TDS SMET LiteFlo® Lightweight Flowing ScreedAftercare SMET LiteFlo® Lightweight Flowing ScreedSMET Floor Screeds and Compounds Product SelectorWe supplied Pier Contractors Ltd with SMET LiteFlo® Lightweight Flowing Screed for the renovation job in Old Admiralty Building Refurb in London. The product supplied to help deliver the project is a high-quality pumpable, factory-produced, CE marked, self-levelling screed based on calcium sulphate.German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates - means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.SMET LiteFlo® Lightweight Flowing Screed is a high-quality, innovative, pumpable factory-produced, CE marked, self-levelling screed based on calcium sulphate. Made from specially selected aggregates, makes it 70% lighter than traditional sand & cement – ultimately this means less is required per m2.LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.Have a look at the Northern Builder MagazineTop 5 Liquid Screeds Article.  Read about SMET LiteFlo® in the Irish Construction News.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET has a flooring compound or ready to use product suitable for your application.www.smetbuildingproducts.com or www.smet.ie

SMET supplied SMET LiteFlo® Lightweight Flowing Screed for a timber suspended floor, in a self-build set in the idyllic district of Ballymena. Smet LiteFlo® Lightweight Flowing Screed is a high-quality, innovative, pumpable factory-produced, CE marked, self-levelling screed based on calcium sulphate. German-made, SMET LiteFlo® Lightweight Flowing Screed is unique, in that it’s the first-available, pumpable lightweight flowing screed. Made from specially selected aggregates, which make it 30% lighter than conventional flowing screeds and 70% lighter than Sand & Cement - means less is required per m2. Another plus is that that screed made from Calcium Sulphate has naturally substantially lower embodied carbon emissions than a sand and cement screed.LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.Have a look at the Northern Builder MagazineTop 5 Liquid Screeds Article. Read about SMET LiteFlo® in the Irish Construction News.Innovative SMET LiteFlo® is particularly suitable for use in timber-frame builds, suspended timber floors, tower blocks, apartments, and high-rise buildings. SMET demonstrates best practice in construction partnerships - providing a superior level of customer service to their Smet Supported Partners during the installation process.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET has a flooring compound or ready to use product suitable for your application.www.smetbuildingproducts.com or www.smet.ie

Job: Maldron Hotel Swimming Pool Renovation, Portlaoise, Co. Laois.Smet Supported Partner:Precision Building Services – Mark PembertonProducts: Sopro Rapidur® B5 Rapid Drying Screed BinderMerlin Barrier CoatSopro RAM 3 (454) Renovation and Levelling MortarSopro GD 749 Universal Floor and Wall PrimerSopro DSF® 523 Tanking MembraneSopro PUK 503 PU AdhesiveSopro VF HF 420 – VarioFlex® High Strength Flexible Tile AdhesiveSopro’s No. 1 Flexible Tile AdhesiveSopro FKM® XL 444 – Extra Light Weight Tile AdhesiveSopro Sanitary SiliconeSopro DE 014/015 Sealing CornersSopro FEP 508Sopro DBF-638Racofix 818Description:SMET supplied Smet Supported Partner, Precision Building Services (Mark Pemberton), for the renovation of the Maldron Hotel Swimming Pool, Portlaoise, Co. Laois. A total area of Floor screed @ 140m² | Wall tiling @125m² | Floor tiling @ 140 m² was completed.New floor installation with fast-track – rapid drying floor screed solution, using Sopro Rapidur® B5 Rapid Drying Screed Binder, a fast-setting screed which was laid to falls prior to waterproofing and tiling providing an early completion. German-made Rapidur® B5 Rapid Drying Screed Binder is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560.Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet.Sopro Rapidur® B5 was installed directly on top of Merlin Barrier Coat wet on wet. The screed was ready for waterproofing/tiling after 3 days. This system was also used to repair the Jacuzzi’s surrounding walls prior to waterproofing, tiling, and grouting.Sopro RAM 3 levelled the deck area (3-60mm) between the drainage channel edge and pool perimeter movement joint. Sopro RAM 3 was bonded with Sopro GD 749.

Job: Restoration of Norman CastleProduct: SMET NHL 5 BinderDescriptionSMET NHL 5 Binder was specially selected for the restoration works in this historic Norman Castle and Tower.  Rainey Restoration Ltd used our superior-quality pure Natural Hydraulic Lime binder SMET NHL 5 to produce a superior-quality lime mortar.SMET NHL 5 is a high-quality, pure, Natural Hydraulic Lime binder, produced under ISO 9001 and ISO 14001 management systems to EN 459-1. The eminent hydraulic strength development of SMET NHL 5 makes it suitable for producing lime mortars for masonry work, rendering, plastering base coats, and limecrete in extreme weather environments and exposed areas.  An eminently hydraulic lime binder for the production of mortars particularly suited for ecological new build, restoration, and preservation works in extreme weather environments and exposed areas. The product’s special composition allows the mortar product to breathe and also permits constant hygrometric exchange between the substrate and the environment.NHL binders, available directly in-store and online via our distribution partner Haldane Fisher, are particularly suited for ecological new builds, conservation, restoration, and preservation works. The products’ special composition allows mortars to breathe and permits constant hygrometric exchange between the substrate and the environment. This restoration is another showcase of sympathetic historic building restoration, using superior-quality NHL products available from SMET.Our restoration and preservation NHL is available from Haldane Fisher online. Superior quality combined with exceptional technical support and aftercare, are the key drivers in the selection of SMET natural conservation products.ISO 9001, 14001, and 45001 accredited Smet Building Products Ltd, demonstrating – once again – best practices in supporting Smet Supported Partners in Natural Hydraulic Lime products.

Job:Transformation of Seamus Heaney Centre, QUBMain Contractor:GEDA ConstructionPlastering Contractor:IFP LtdProducts:bauprocalc KG – Hydraulic Lime-Based Skim Coatbauprocalc 830 – Hydraulic Lime-Based Render/PlasterSMET NHL 3.5Descriptionbauprocalc KG – Hydraulic Lime-Based Skim Coat, bauprocalc 830 – Hydraulic Lime-Based Render/Plaster and SMET NHL 3.5 were selected for the internal plastering in the renovation of this important historic building refurbishment of The Seamus Heaney Centre in QUB Belfast.This consisted of the Scud Coat: SMET NHL 3,  followed by the Base Coat: bauprocalc 830, and finished with our Finish Skim: bauprocalc KG.Quadruple-BSI-certified SMET Building Products continues to champion sustainability and ethical responsibility in the construction industry, making it a trusted partner for conscientious builders and developers. For more restoration case studies, visit: www.smetbuildingproducts.com/projectsNI Builder Magazine says, “As the main contractor for Queen’s University Belfast’s new £4.9m Seamus Heaney Centre, GEDA preserved the heritage of two listed buildings while upgrading the site to meet modern standards. Transforming two Grade II-listed buildings into Queen’s new £4.9m Seamus Heaney Centre has proved both a challenging and rewarding experience for its main contractor.Dungannon-based GEDA Construction is well-versed in handling projects of all sizes and complexity and pushing the boundaries of engineering and construction.The refurbished site occupies 38-40 University Road and 3 Mount Charles buildings. Spanning 1,000 sqm, it doubles the size of the original centre founded in 2004 and opened by the acclaimed poet himself.Having successfully navigated the many challenges emerging along the way, the Seamus Heaney Centre now represents a distinguished addition to GEDA’s portfolio.“A significant milestone for our company, it reflects our ability to handle complex, high-profile projects and reinforces our reputation as a trusted and capable construction partner,” said Eddie Murnin, Associate Director of Construction at GEDA“This project stands out as a testament to our expertise, collaborative spirit and unwavering commitment to preserving cultural heritage while advancing modern construction practices.”  Source NI Builder July 24WHY USE LIME-BASED RENDER AND PLASTER?SMET’s bauprocalc products are CE-marked, factory-produced hydraulic hardening skim coat plasters and render based on lime, specially designed for hand and machine application produced to DIN EN 998-1. bauprocalc KG and bauprocalc 830 contribute to a healthy internal atmosphere.They are an excellent alternative to plaster and renders containing gypsum or patent cement, which are too strong and have less vapour-permeable qualities.They are ideal for kitchens, bathrooms, and rooms where high humidity levels are expected. bauprocalc KG produces a mortar that is softer than cement mortar. After the initial set, stability and strength gradually build up over time, allowing enough flexibility to cope with minor settlement or movement in the building during this period, thereby reducing the risk of cracking.bauprocalc 830 has unique properties, making it suitable for application on low, medium, and high-density substrates, especially suited for renovating old /listed buildings and ecological new builds.Good vapour permeability performance allows an unhindered transference of excess internal moisture through the building to the outside, thereby contributing significantly to a balanced and healthy internal atmosphere.SMET is delighted to have supplied its bauprocalc plaster and SMET NHL 3.5 for the lime plastering of The Seamus Heaney Centre, Queen’s University Belfast.Check out SMET’s full range of lime and lime-based products now available direct from Smet Building Products Ltd.SMET is BES 6001 CompliantCall SMET to purchase directly: Tel UK: +44 (0) 28 3026 6833 or ROI: +353 (0) 1697 8586Or to purchase SMET NHL binders online, you can buy SMET NHL 3.5 direct from Haldane Fisher Nationwide, follow this link. SMET NHL binders, available online or in-store via our distribution partner Haldane Fisher. SMET NHL binders are particularly suited for ecological new builds, conservation, restoration, and preservation works. The products’ special composition allows mortars to breathe and permits constant hygrometric exchange between the substrate and the environment.Make SMET your trusted partner! Related DownloadsTDS CASEA bauprocalc KG – Hydraulic Lime-Based Skim CoatTDS CASEA bauprocalc 830 – Hydraulic Lime Based Render/PlasterTDS SMET NHL 3.5EPD – CASEA bauprocalcSMET & Haldane Fisher NHL Brochure

SMET Supported Partner, Brendan Doherty Screeding Services supplied Südanit 280 Alpha Hemihydrate Screed and SMET LiteFlo® Lightweight Flowing Screed for the floor solution in this self-build in picturesque West Donegal.The ground floor was prepared with 280 Alpha Hemihydrate Screed at 50mm with UFH, maximising the clients’ insulation. The first floor was completed at 50 mm SMET LiteFlo® Lightweight Flowing Screed poured on UFH on timber joists.The 280 Alpha Hemihydrate Screed self-levelling liquid screed is remarkably quick to walk-on – applied at 500m² per day and walkable within 6 hours thus ensuring the follow-on trades were not delayed. it’s particularly suitable for use with UFH, fully encapsulating pipes and services, providing excellent heat transfer – and with thinner floors and more insulation – this increases the performance of underfloor heating.SMET LiteFlo® Lightweight Flowing Screed used on the first floor of the timber frame house is ideal where loading is an issue. SMET LiteFlo® Lightweight Flowing Screed is a high-quality, innovative, pumpable factory-produced, CE marked, self-levelling screed based on calcium sulphate.German-made LiteFlo® is unique, in that it’s the first pumpable lightweight flowing screed. Made from specially selected aggregates, makes it 30% lighter than conventional flowing screeds and therefore 70% lighter than traditional sand & cement – ultimately this means less is required per m2. LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.TDS SMET LiteFlo® Lightweight Flowing ScreedAftercare SMET LiteFlo® Lightweight Flowing ScreedSMET Floor Screeds and Compounds Product SelectorHave a look at the Northern Builder MagazineTop 5 Liquid Screeds Article.  Read about SMET LiteFlo® in the Irish Construction News.SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.

Smet Supported Partner, Fast Floor Screed pump applied SMET LiteFlo® Lightweight Flowing Screed for the retrofit of this large house in Dalkey Co Dublin. This lightweight screed is ideal for renovation projects where loading is an issue. LiteFlo® is a high-quality, innovative, pumpable factory produced, CE marked, self-levelling screed based on calcium sulphate.German-made LiteFlo® is unique, in that it’s the first pumpable lightweight flowing screed. Made from specially selected aggregates, makes it 30% lighter than conventional flowing screeds and therefore 70% lighter than traditional sand & cement – ultimately this means less is required per m2. Another plus is that screed made from Calcium Sulphate has naturally substantially lower embodied carbon emissions than a sand and cement screed.LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.Have a look at the Northern Builder MagazineTop 5 Liquid Screeds Article.  Read about SMET LiteFlo® in the Irish Construction News.Smet Building Products Ltd in partnership with Fast Floor Screed Ltd, demonstrates, once again, a superior level of customer service, both pre and after-care. Whether your job is self-build, retro-fit, floor renovation, design, commercial, or an industrial venture – the flooring gurus have a floor compound suitable for you.Contact Smet Building Products Ltd 

Job: Restoration of cottage dating from 1764 in Ardglass Golf ClubProduct: SMET NHL 3.5 BinderRelated DownloadsTDS SMET NHL 3.5SMET / Haldane Fisher NHL BrochureSMET NHL 3.5 binder was specially selected for the restoration works internal restoration of an old 1764 cottage found on the 7th hole of historic Ardglass Golf Club. This will be an added attraction for members and the many overseas visitors alike when coming to play Ardglass.Our superior-quality pure Natural Hydraulic Lime binder SMET NHL 3.5 was used to produce a superior-quality lime mortar for repointing and internal restoration.  The selective hydraulic strength development of NHL binders makes them particularly suitable for producing lime mortars for masonry work, rendering, and plastering on historical buildings and monuments.NHL binders, available directly from SMET and online or in-store via our distribution partner Haldane Fisher, are particularly suited for ecological new builds, conservation, restoration, and preservation works. The products’ special composition allows mortars to breathe and permits constant hygrometric exchange between the substrate and the environment.This restoration is another wonderful showcase of sympathetic historic building restorations around the country, using superior-quality NHL products available from SMET.