Sherwin-Williams High Performance Flooring

Our range of food-safe, anti-microbial, non-slip, resin flooring systems comply with strict hygiene & safety standards for the food & drink sector including HACCP International. Industrial flooring from food factories, distilleries, wineries and breweries, to dairies, meat processing, bakeries, confectionaries and pet foods, we've got you covered. To ensure cleanliness, the best solution is a monolithic industrial floor structure enusure theres no ingress of water or fluids, and nothing gets trapped between the substrate and the floor surface. Systems are seamless and impervious; spills stay on the surface which can be cleaned maintaining hygiene with no contamination. Our floors can also be pitched to a fall and can have coving and steel drainage to complete the hygienic finish.

We manufacture a range of industrial resin flooring that stand up to modern industrial demands. Resin flooring provides seamless monolithic solutions making the floor a permanent fixture of a building with long term performance. Industrial flooring for processing areas, engineering environments, distribution centres, logistics facilities and manufacturing plants. Sherwin-Williams resin flooring can tolerate constant heavy-traffic from automated machinery and fork lift truck operations. Industrial flooring options also have a high compressive strength, meaning they can withstand heavy loads from equipment, high loads and shelving. Our hard-wearing, seamless resin floors can incorporate bespoke levels of non-slip to protect staff and operators from slips, trips and falls.

Colour chart for Epoxy coatings and self smoothers

Sherwin-Williams standard colour range of Resuflake multi coloured seamless resin floor systems. These systems vary in thickness from 0.5mm to 11mm using epoxy, polyurethane and polyaspartic based formulations.

AquArmor S is a water based epoxy resin floor system for application as an industrial floor coating at a thickness of around 100 microns. This is a roller applied economic industrial coloured floor coating providing a hard seamless finish. Using two-pack technology Resuseal WB the epoxy coating used in this system has extremely good adhesion to concrete and other cementitious surfaces. The product is low odour being a water based product and is vapour permeable. The product is typically used as an industrial floor finish for large areas of concrete such as warehouses, production areas and workshops where an economic hard wearing clear or coloured finish is required to protect and case harden a substrate. Resuseal WB can also be used as a wall finish.

AquArmor UV Wall system is a very hard hygienic wall finish with superb adhesion to cementitious type substrates. The system utilises a water based epoxy resin base coat for adhesion which is top coated with a water based polyurethane for toughness, UV stability and resistance to chemicals. The finish is solvent free with very low VOC content making it ideal for vertical substrates in food preparation environments. It is also used in custodial suite areas and prisons because of its toughness and adhesion.

Sherwin-Williams Cemcrete S industrial flooring system is a polymer-cement coating designed for driveways, walkways, car parks, public concourse areas and ship decks. It can be laid over a wide range of floor and wall surfaces, and bonds with the substrate in a way that allows for movement and flexibility in the structure. Inside and out Cemcrete industrial flooring has superb adhesion and can be used in exterior or interior environments, and be applied as a smooth or textured finish as required. An aggregate can be added to create a non-slip texture, it can also be built-up to achieve a range of resin floor seamless thicknesses. Whatever the industrial flooring system you choose, you'll have peace of mind that youve got support from Sherwin-Williams, the worlds largest coating company.

Resucoat Deco Flake SF is a multi-component epoxy floor system which utilises coloured akes applied to a base coat to provide a 1 mm thick decorative flooring finish. Resucoat Deco Flake SF provides a solvent free low odour flooring solution with a hard wearing gloss or matt finish. This system can be installed economically over large industrial areas where heavy duty performance is required with a decorative floor coating. Sherwin-Williams provide a standard colour range of Resuflake blends for this system and bespoke blends of colours incorporating glitters to provide a sparkle finish are also available. Resucoat HB used as the base coat for this system is Sherwin-Williams best selling high-build epoxy resin industrial coating.

Elladur Deco Flake SF is a polyaspartic high-build coating system applied by roller and brush incorporating multi-coloured decorative flakes. The resin flooring system has very low VOC content and is fast curing down to 2 degrees between 3-5 hours for each coat. Elladur Deco Flake SF is UV stable and is hard wearing with a degree of flexibility.

Elladur SF S is s build coating system using polyaspartic fast curing advanced materials to provide a tough and durable gloss finish. Elladur SF S is UV stable and has low odour and extremely low VOC content (volatile organic compounds. Because of the fast curing performance in a few hours several coats of Elladur can be applied in a day. Where anti-slip finishes are required aggregates can be incorporated to create textured floor finishes. See the Elladur SF SR system for this. Decorative systems can be created incorporating coloured flakes or quartz. See the Elladur Deco Flake SF and Elladur Deco Quartz SF system guides for these resin flooring finishes. Whilst being tough and durable as a resin floor coating Elladur SF also has a degree of flexibility for a wide range of applications.

FasTop RS69 industrial flooring is a heavy duty resin rich antimicrobial polyurethane floor screed system providing superb resistance against chemical attack, thermal shock and abrasion. A food grade non-taint and odourless product, providing slip resistance in wet and dry conditions which is certified as being food safe with HACCP International. For fast installation FasTop RS69 industrial flooring can be applied by rake and trowel as a resin rich system. Resistant to steam cleaning, boiling water and process liquids up to 120ºC and suitable for freezer temperatures down to -40ºC at 9 mm thickness. As a resin rich floor screed FasTop RS69 has such good adhesion to concrete substrates that it becomes a monolithic permanent fixture of a building to provide a very hard long term solution.

FasTop SL23 is a water-based polyurethane self-smoothing resin floor screed system typically installed at 3 mm thickness to provide excellent heavy duty usage with resistance to thermal shock, abrasion and chemical attack in aggressive industrial environments. FasTop SL23 is a resin flooring system suitable for use in wet and dry environments as a dense impervious smooth finish. The system is HACCP International certified as a food grade product making it ideal for the food and beverage industry where a smooth floor finish is required.

FasTop SL23 WBU is a polyurethane resin screed system thats UV stable, non-taint, low odour and low VOC, yet hard wearing and hygienic. Brought to you by Sherwin-Williams, the worlds largest coating company. Our Sherwin-Williams FasTop polyurethane resin screed systems are hard wearing and hygienic with the option of enhanced antimicrobial protection. They have very low levels of Volatile Organic Compound (VOC, Low-VOC) which means virtually no odours and no tainting during installation, because of this FasTop is a popular choice for projects in the food and drink sector. The UV stable protective finish is available as a Satin or Matt coloured finish which also has excellent chemical resistance and durability.

FasTop SL45 is a water-based polyurethane self-smoothing resin floor screed system designed to provide excellent heavy duty usage with resistance to thermal shock, abrasion and chemical attack in aggressive industrial environments. The flooring system is HACCP International certified as food grade product promoting the latest modern standards for food factory flooring. The resin flooring system is typically installed at 4-5 mm thickness providing a full matt finish suitable for heavy duty use. FasTop SL45 contains an antimicrobial agent that reduces bacteria that come into contact with the floor, making it ISO 22196 compliant and inhibiting the growth of bacteria and fungal organisms such as E-Coli, Aspergillus Niger, and Salmonella.

FasTop SL45 SRA is a 4-5 mm thick polyurethane self-smoothing resin floor system with an aggregate scatter and seal coat to provide a very heavy duty textured finish with resistance against chemical attack, hot water and abrasion. FasTop SL45 SRA is a food certified system ideal where maximum hygienic standards are required with an anti-slip textured finish.

FasTop SL45 is a self-smoothing polyurethane resin screed system that's UV stable, non-taint, low odour and low VOC, yet hard wearing and hygienic. Brought to you by Sherwin-Williams, the worlds largest coating company. Our FasTop polyurethane resin screed systems have very low levels of Volatile Organic Compound (VOC, Low -VOC) which means virtually no odours and no tainting during installation. FasTop SL45 WBU is a popular choice for projects in the food and drink sector and other industries where a UV stable floor finish is required.

FasTop TG69 industrial flooring is a very heavy duty antimicrobial polyurethane floor screed system providing superb resistance against chemical attack,thermal shock and abrasion. A HACCP International certified food grade, non-taint and odourless product which incorporates an antimicrobial additive tested to ISO 22196, and provides slip resistance in wet and dry conditions. When installed at 9 mm thickness the system is resistant to steam cleaning and pressure washing, boiling water and process liquids up to 120ºC and also suitable for freezer temperatures down to -40ºC. FasTop TG69 industrial flooring is installed in a single application as a resin screed which has superb adhesion to create a monolithic long term seamless flooring solution which becomes a permanent fixture of a building.

Resucoat Deco Flake Screed is a multi-component epoxy floor screed system which utilises coloured flakes applied to 10 mm epoxy screed to provide a very heavy duty decorative flooring finish. Resucoat Deco Flake Screed is used on rigs and offshore areas and can form coving, ramps and concrete surface repairs where required. The resin floor screed system has a very high compressive strength and superb adhesion making it ideal for any heavy duty industrial situation where maximum durability is required from a floor finish.

Resucoat HB S industrial flooring is a two-pack solvent-free high-build epoxy resin system system for application as a heavy duty floor coating at a thickness of 500 microns. The coating will provide a smooth Gloss coloured finish to function as a hard wearing floor surface which is installed throughout all industrial sectors and commercial situations where a tough paint type finish is required. Anti-slip aggregate can be added if required to create a light textured finish. See the Resucoat HB SR system guide for this. Applied by roller and paint brush the product is 100% solids and low odour producing an economical seamless, hard wearing, hygienic floor finish. Resucoat HB is available in a range of standard colours and can also be supplied in bespoke Ral shades as required.

Resucoat HB SR is a two-pack solvent free high-build textured epoxy resin system for application as a heavy duty floor coating at a thickness of 500. The system will provide a textured non-slip gloss coloured finish which is suitable for all areas of industry where an economical hard wearing anti-slip and chemically resistant floor coating is required. The amount of aggregate incorporated into the coating system can be increased to create a more textured finish. This can effect the coverage rate of the Resucoat HB and create a finish which has greater non-slip performance but requires a more aggressive cleaning regime. Please consult Sherwin-Williams for more advice on this.

Resucoat Profile S is a roller applied 100% solids epoxy floor coating system which incorporates an aggregate within the formulation to create a consistent light textured finish. This is an easier way of achieving a textured non-slip floor finish compared to an aggregate being added as a scatter by hand whilst a floor coating is being applied. The system is installed across a wide range of commercial and industrial environments. This includes large areas such as Stadiums where there can be large amounts of footfall which require non-slip performance and also ease of cleaning to maintain good aesthetic standards.

Resudeck EP is a multi-component epoxy flooring system for underground and basement car park decks where thermal cycling conditions do not require crack bridging properties. As a solvent-free very low odour system Resudeck EP coated surfaces reduce the risk of skidding with traction and provide cosmetically enhanced spaces with light reflection. Areas can be colour blocked to have good visibility for all forms of traffic.

Resudeck ID floor coating system is for intermediate car park decks. The system is promoted for car parks, vehicle areas and loading bays using the latest in polyurethane and resin technology to provide durable, long lasting attractive surface coatings that protect the integrity of your vehicle facilities. Our slip and skid resistant Resudeck deck coating solutions come in a number of bright and colourful options that are not only attractive, but also waterproof to prevent corrosion. As a car park is often one of the first things visitors to your premises will see, aesthetics and impressions matter. Our Resudeck surface systems are resilient against the dynamic movement of traffic and pressure from heavy loads often found in these environments.

Resuflor FX S is a self smoothing polyurethane modified epoxy resin seamless floor system with a degree of flexibility. The system has low VOC content which is non dusting and designed to provide a smooth gloss hard wearing finish at a nominal 3 mm thickness following the profile of the existing floor. Resuflor FX S can be applied over varied substrates including concrete, asphalt, metal and wood as it has a degree of flexibility to accommodate possible movement within a substrate.

Resuflor SL S is a self smoothing epoxy resin floor system which provides a flat hard wearing gloss finish 3mm in thickness. The system provides a very hard wearing aesthetically pleasing finish with resistance against chemical attack and abrasion. It is ideal for production areas and clean room type situations where a smooth and tough hygienic floor is required. As a liquid applied self smoothing resin flooring system Resuflor is applied by notched trowel and spread evenly and then spiked rolled within 15 minutes. The product will follow the contours of an existing substrate and cure overnight to a hard finish. Resulfor is installed in varied industrial situations including automotive and aviation and also pharmaceutical environments where clean room type finishes are required.

Resuscreed Deco Quartz TS system is a 3-pack decorative trowel applied epoxy resin industrial resin floor screed. The system incorporates multi-coloured aggregates to create a subtle decorative finish. It is typically applied at 4 mm minimum thickness to provide a hard wearing, attractive smooth seamless flooring which is sealed with clear resin for an impervious finish. Resuscreed Deco Quartz TS can be used to form coved skirting at the same time that the flooring is applied to create a truly seamless and continuous finish. This makes the product a superb solution for pharmaceutical type projects where a seamless 'tanked' finish is required with good aesthetics. The system is also widely specified in custodial areas because of its durability and ease of cleaning.

The SofTop Comfort SL resin floor system is seamless, flexible and heavy duty yet soft and comfortable underfoot. Not only is SofTop Comfort SL better for the health and safety of employees and visitors, but it also contributes to noise reduction. The soft surface is similar to that found with cushion vinyl, but without the joins, seams and abrasions that can ruin the look and feel of your floor finish. Whilst being tough and durable the SofTop resin comfort flooring system reduces bumps and vibrations through the body making it better for the back. Its also sound absorbing and reduces sound echoing around a building. The system is typically installed widely in commercial areas and hospital and healthcare environments.

This guide provides a comprehensive overview of cleaning processes for cleaning and maintaining resin floor systems. Sherwin-Williams manufacture and supply a range of single coloured and decorative flooring used across large floor areas. Our resin flooring systems are seamless and hygienic, create an ultra-clean environment suitable for the food and drink sector. We always recommend a proper industrial cleaning regime being organised to help maintain the life and the appearance of all our systems. The textured finishes available vary greatly with resin flooring systems as they are used throughout all industrial sectors. Cleaning processes therefor vary according to site situations in line with what standards have to be maintained.

At Sherwin-Williams we manufacture a range of seamless resin flooring solutions for the automotive industry including workshops, dealerships, valeting areas, showrooms and production areas in manufacturing plants. Automotive facilities require attractive floors that are hard-wearing, durable, scratch resistant, anti-slip, chemical and stain resistant whilst also being easy to maintain. Our Sherwin-Williams resin flooring systems deliver a seamless finish that creates a safe, aesthetically pleasing and hygienic environment where oil and chemical spills can be easily cleaned.