Ronacrete Ltd
Excellence in concrete floor repair, polymer screeds and resin bound surfacing products.
A-Z
Showing 1-36 of 37
FPC Certificate (0836–CPR–13-F042 to BS EN 13813)
Ronacrete Ltd
Monoprufe DPM TDS
Ronacrete Ltd
Technical data sheet for Monoprufe DPM
Monoprufe WP Elastic
Ronacrete Ltd
Monoprufe WP Elastic is a high performance cold applied polymer cement
waterproofing membrane. Monoprufe WP Elastic is used in basements, planters and on balconies and terraces to exclude water. Monoprufe WP Elastic is sufficiently elastic to bridge minor dynamic cracks.
Monoprufe WP Elastic is a two component blend of polymers, cements, graded fillers and chemical binders. Monoprufe WP Elastic is mixed on site to produce a roller or slurry brush applied thin liquid membrane. Monoprufe WP Elastic must not be used as a wearing surface, it may be covered with screeds, renders, tiles, resilient flooring etc.
RonaBond Bedding Mortar
Ronacrete Ltd
RonaBond Bedding Mortar is used to bond brick slips, copings and other components to concrete and building surfaces. The cured mortar has high physical strength, is waterproof and frost proof and will not break down through frost action.
RonaBond Concrete Repair Mortar
Ronacrete Ltd
RonaBond Concrete Repair Mortar is a prepacked, ready to use mortar for concrete repair and is used with Ronacrete Standard Primer which gives monolithic adhesion to all correctly prepared surfaces. RonaBond Concrete Repair Mortar is used to repair and replace concrete damaged as a result of spalling through reinforcement corrosion, freeze/thaw cycling, impact or other damage.
RonaBond Crack Bridging Anti Carbonation Coating WB technical data sheet
Ronacrete Ltd
Product technical data sheet
RonaBond EasySkim FC
Ronacrete Ltd
RonaBond EasySkim FC is a pre-packed fairing coat mortar which is applied as a skim coat in thicknesses up to 3mm to provide a smooth, hard finish to damaged, blemished and repaired concrete surfaces. RonaBond EasySkim FC is used as a levelling mortar prior to the application of protective coatings or paints. The material is supplied in pre-blended form.
RonaBond Flowable Micro Concrete
Ronacrete Ltd
RonaBond Flowable Micro Concrete is a repair concrete used for reinstatement of structural elements such as columns and beams. RonaBond Flowable Micro Concrete is designed for pumped or poured application to watertight shutters when hand application of mortars is impractical or undesirable. RonaBond Flowable Micro Concrete is shrinkage compensated and provides high ultimate strengths.
RonaBond HB25
Ronacrete Ltd
RonaBond HB25 is a prepacked mortar used for repairing concrete on vertical and overhead surfaces where ease of application is as important as high strength. It can be applied in relatively thick section to walls and soffits and, depending on the nature of the repair, in layers up to 75mm deep in pocket repairs.
RonaBond HB25 is supplied prepacked requiring only the addition of water.
The cured mortar bonds well to concrete, steel and other building surfaces. It offers long term performance and protection to structures.
RonaBond HB40
Ronacrete Ltd
RonaBond HB40 mortar is used for repairing concrete on vertical and overhead surfaces where ease of application is as important as strength. RonaBond HB40 can be applied in relatively thick section to walls and soffits and, depending on the nature of the repair, in layers up to 75mm depending on size and orientation.
RonaDeck Eco Tree Pit
Ronacrete Ltd
RonaDeck Eco Tree Pit is a resin bound natural aggregate finish surround for planted trees in public and private areas. Surrounding the tree in a solid yet semi-flexible construction allows the tree to grow, prevents a build up of litter and removes a storage or hiding place for hazardous items such as syringes and needles. Dogs are also less likely to foul in such areas.
Its porosity allows water to flow through a 6-10mm aggregate system at the rate of >850 litres/m2/minute. The flow rate may be reduced when using a smaller or more angular aggregate.
RonaDeck Eco Tree Pit Data Sheet
Ronacrete Ltd
RonaDeck Eco Tree Pit data sheet
Ronacrete Ltd
RonaDeck EcoAgg UV
Ronacrete Ltd
RonaDeck EcoAgg UV is a resin bound aggregate surface for pedestrian traffic. RonaDeck EcoAgg UV surfaces are decorative and functional, seamless and slightly flexible. The open matrix allows water to drain through to the base, eliminating water ponding and allowing water to drain to planted areas or land drains. The system is designed to be SuDS compliant reducing the impact of development on flood risk and allowing water to flow into water courses or water harvesting systems. Edgings created from brick, stone, timber or steel should be installed to retain and protect the resin bound surfacing.
RonaDeck EcoPath UV
Ronacrete Ltd
RonaDeck EcoPath UV is a resin bound aggregate surface for pedestrian traffic. RonaDeck EcoPath UV surfaces are decorative and functional, seamless and slightly flexible. The open matrix allows water to drain through to the base, eliminating water ponding and allowing water to drain to planted areas or land drains. The system is designed to be SuDS compliant reducing the impact of development on flood risk and allowing water to flow into water courses. Edgings created from brick, stone, timber or steel should be installed to retain and protect the resin bound surfacing.
RonaDeck EcoPath UV is typically applied to compacted Type 3 aggregate to provide a thin alternative to asphalt or concrete. RonaDeck EcoPath UV is designed for light foot traffic only.
RonaDeck EcoPath UV data sheet
Ronacrete Ltd
RonaDeck EcoPath UV data sheet
RonaDeck Resin Bonded Surfacing
Ronacrete Ltd
RonaDeck Resin Bonded Surfacing is a resin bonded aggregate surfacing system for paths, car parks, drives, ramps, highways etc. RonaDeck Resin Bonded Surfacing produces a surface with the appearance of natural aggregate or stone but with aggregate which is firmly bonded to the surface.
It is designed for use on concrete, asphalt, steel and timber surfaces to provide some or all of the following:
Decoration
High friction surfacing
Colour coding
Compliance with Disability Discrimination Act
Minimal maintenance
An alternative to loose aggregate and stone surfacing
RonaDeck Resin Bonded Surfacing provides surfaces for all types of traffic from paths to busy highways and provides excellent traction in wet and dry conditions.
RonaDeck Resin Bound and Bonded Surfacing
Ronacrete Ltd
The RonaDeck Resin Bound and Resin Bonded Surfacing range of products provide highly decorative and functional systems for exterior pavement surfacing.
RonaDeck Resin Bound Surfacing TDS
Ronacrete Ltd
Technical Data Sheet
RonaDeck Rubber Granule Tree Pit
Ronacrete Ltd
RonaDeck UV Rubber Granule Tree Pit is a resin bound rubber granule tree pit surfacing for trees in hard landscaped areas. RonaDeck UV Rubber Granule Tree Pit surrounds trees in a solid yet porous and flexible construction, allowing drainage of rainwater to roots and unlike grilles presenting no voids for litter, or hiding of syringes and needles.
The RonaDeck UV Rubber Granule Tree Pit comprises a two layer system of resin bound rubber granules. The thicker base layer is composed of black recycled 2-6mm granules bound in UV stable polyurethane resin and the topping layer of 1-4mm coloured granules is bound in the same resin. The design of this resin bound tree pit system provides a surface which is attractive, highly porous and able to receive light foot traffic.
RonaDeck Wet Pour Rubber Granule Surfacing
Ronacrete Ltd
RonaDeck UV Wet Pour Rubber Granule Surfacing is a resin bound rubber granule surfacing for pedestrian traffic. It is used to create flexible seamless safety surfaces which absorb sound and impact. RonaDeck UV Wet Pour Rubber Granule Shockpad is a base layer for absorbing impact below and around play equipment. The system must be laid onto a sound stable and solid base; concrete or no fines concrete is the preferred substrate, the system may be applied to asphalt concrete but there is a risk of migratory staining from the bitumen binder. Applications exceeding 40mm depth may be laid on compacted MoT Type 3 aggregate. RonaDeck UV Wet Pour Rubber Granule Surfacing is suitable for applications in areas such as playgrounds and golfing environments.
Ronafix for Screeds
Ronacrete Ltd
Ronafix screeds are site batched screeding mortars and fine concretes. The mix design for each is Ronafix admixture, cement, medium grade sharp sand, aggregate as determined by the mix design, plus water. The components are measured by weight or by volume on site and mixed to form the screed.
They are used with a primer of Ronafix and cement which achieves monolithic adhesion to correctly prepared concrete or screeds.
Ronafix screeds are used to lay new screeds and toppings as thin as 6mm bonded or 35mm unbonded or floating. The cured mortar bonds securely to suitably prepared surfaces and is water resistant.
Ronafix Pre-packed Floating Screed 35mm+
Ronacrete Ltd
Ronafix Pre-packed Floating Screed 35mm+ is supplied as a pre-packed, two component, ready to use mortar for laying floor screeds on insulation boards. Ronafix Pre-packed Floating Screed 35mm+ is supplied complete with all the correct dry components in a bag and a bottle of polymer gauging liquid.
Ronafix Pre-packed Floating Screed 35mm+ is used to lay minimum 35mm floating screeds for residential applications. Screed thickness should be increased for medium to heavy duty use, The screed is resistant to water, frost, and medium to heavy wear when covered with a suitable flooring.
Ronafix Pre-packed Screed 6-50mm
Ronacrete Ltd
50mm is supplied as a pre-packed, two component, ready to use mortar for laying floor screeds. Ronafix Pre-packed Screed 6-50mm is supplied complete with all the correct dry components in a bag and a bottle of polymer gauging liquid. Ronacrete Standard Primer two part polymer cement bonding agent is required for bonded screed applications.
Ronafix Pre-packed Screed 6-50mm is used to lay new screeds and toppings as thin as 6mm for light duty bonded and 35mm unbonded or floating applications. Screed thickness should be increased for medium to heavy duty use, Excellent adhesion can be achieved to suitably prepared surfaces and the screed is resistant to water, frost, and medium to heavy wear.
Ronafix Pre-packed Wearing Screed 15mm+
Ronacrete Ltd
Screed 15mm+ is supplied as a pre-packed, two component, ready to use mortar for laying floor screeds. Ronafix Pre-packed Wearing Screed 15mm+ is supplied complete with all the correct dry components in a bag and a bottle of polymer gauging liquid. Ronacrete Standard Primer two part polymer cement bonding agent is required for bonded screed applications.
Ronafix Pre-packed Wearing Screed 15mm+ is used to lay new granolithic screeds as thin as 25mm for heavy duty bonded application. Excellent adhesion can be achieved to suitably prepared surfaces and the screed is resistant to water, frost, and to heavy wear. The use of granolithic floating and unbonded screeds is uncommon and advice should be sought from Ronacrete Technical Department.
Ronafix SBR (Concrete Repair) technical data sheet
Ronacrete Ltd
Product technical data sheet
Ronafix Underfloor Heating Screed Admixture
Ronacrete Ltd
Ronafix Underfloor Heating Screed Admixture is a liquid polymer admixture which provides a high strength screed. The increased strength of the screed allows it to be laid in thin section, from 40mm, which in turn ensures improved thermal output from the underfloor heating system saving money on energy consumption. Screeds containing Ronafix Underfloor Heating Screed Admixture also dry faster than conventional sand : cement screeds meaning the commissioning process can begin earlier (after only 7 days) and can also be opened to foot traffic after 24 hours.
Advantages
Thin sectionfrom 40mm
Faster commissioning of heating
Improved thermal outputheats up much quicker than traditional screeds
Can be walked on after only 24 hours
RonaFloor Epoxy DPM
Ronacrete Ltd
RonaFloor Epoxy DPM is a two pack solvent free, liquid applied surface damp proof membrane designed to reduce the passage of water vapour. It allows epoxy resins to be placed onto concrete even when the Relative Humidity (RH) of the concrete is highup to 97%.
RonaFloor EWB Technical Data Sheet
Ronacrete Ltd
Product technical data sheet
RonaFloor HB200 technical data sheet
Ronacrete Ltd
Product technical data sheet
RonaFloor Repair 1 Hour 6-50mm Data Sheet
Ronacrete Ltd
RonaFloor Repair 1 Hour 6-50mm TDS
Ronacrete Ltd
Product technical data sheet
RonaScreed Fast Drying Underfloor Heating Screed Additive
Ronacrete Ltd
RonaScreed Fast Drying Underfloor Heating Screed Additive is an additive for site batched screeds is used to quickly reduce the level of retained moisture within the screed allowing floor coverings to be laid over the screed much sooner than with conventional screeds. It also promotes high early strength, permitting early access by following trades.
RonaScreed Fast Drying Underfloor Heating Screed Additive is supplied in concentrated form and used in low dilution. It provides rapid drying and early laying of floor coverings such as sheet vinyl, tiles, carpet etc. When laying onto insulation the minimum screed thickness is 65mm. Heating pipes require a minimum cover of only 30mm of screed.
Time to reach 75% RH
15 days
RonaScreed FastDry Prompt Data Sheet
Ronacrete Ltd
RonaScreed Flowable Base TDS
Ronacrete Ltd
Product technical data sheet
RonaScreed Flowable Topping TDS
Ronacrete Ltd
Product technical data sheet
Showing 1-36 of 37