iKoustic

MuteMat® USP 625-17 is our robust and pimpled acoustic underscreed resilient layer designed for achieving maximum impact reduction between the floating concrete screed and structural concrete slab layers; it's high performance comes from it's deviated pimpled structure helping to secure minimum points of contact between the two layers.

MuteMat OSF 750-03 is our highly effective and most slimline resilient layer available for the reduction of impact noise in concrete constructions. It's density gives minimal compression leaving you a long lasting and effective solution that can receive a wide range of floor finishes.

MuteMat® Gym 15 is an engineered, high performing and easy to install gym floor sound-proofing platform to attenuate high levels of low frequency impact noise and structural vibration. MuteMat® Gym 15 is designed for areas such as entryways/corridors, group fitness areas, locker rooms and spinning studios.

MuteMat OSF 750-10 is our highly effective and slim resilient layer available for the reduction of impact noise in concrete constructions. It's density gives minimal compression leaving you a long lasting and effective solution that can receive a wide range of floor finishes.

MuteMat® USP 750-08 is our robust and pimpled acoustic underscreed resilient layer designed for achieving maximum impact reduction between the floating concrete screed and structural concrete slab layers; it's high performance comes from it's deviated pimpled structure helping to secure minimum points of contact between the two layers.

MuteCradle is our innovative acoustic flooring system for both concrete and timber sub floors to help give a completely floating floor with no direct fixings. The system is also used to help level an uneven floor when combined with our varying sizes of MuteCradles and Cradle Packers. MuteCradle is fitted with a recycled rubber-base layer at 10mm thickness which helps to provide impact reduction within the floating floor system achieving a 53 dB Lnw CL - an average of 28 dB reduction and is compliant with Part E Building Regulations in accordance with Robust Detail (FFT2) for Resilient Cradle and Batten Systems

MuteCradle is our innovative acoustic flooring system for both concrete and timber sub floors to help give a completely floating floor with no direct fixings. The system is also used to help level an uneven floor when combined with our varying sizes of MuteCradles and Cradle Packers. MuteCradle is fitted with a recycled rubber-base layer at 10mm thickness which helps to provide impact reduction within the floating floor system achieving a 54 dB Lnw CL - an average of 27 dB reduction and is compliant with Part E Building Regulations in accordance with Robust Detail (FFT2) for Resilient Cradle and Batten Systems

MuteClip Channel is only compatible with our MuteClip, the reason for this is that the design maintains a return lip to hold substantially more weight as the MuteClip clasps onto this - it cannot be used as a resilient channel. The design also includes two indentations along the profile to provide the channel with further strength.

MuteMat 3 is three-ply, high performing resilient floor mat achieving a superior impact and airborne attenuation in both timber and concrete structures. MuteMat 3 comprises of three materials, 5kg per m2 Mass Loaded Vinyl, a 6mm PE crosslinked foam (closed cell) which is in contact with the surface, and a 7.5kg per m2 Mass Loaded Vinyl. These two different densities within Mass Loaded Vinyl help to reduce resonance between mass layers.

MuteClip LP (Low Profile) is unique in its design with its dual density rubber polymers that are designed and assembled to improve noise reduction over a broad range of frequencies whilst remaining stable and consistent with each MuteClip LP. The adopted low profile helps to reduce the loss of room height whilst never compromising in performance.

MuteClip XP (Extended Profile) is unique in its design with its dual density rubber polymers that are designed and assembled to improve noise reduction over a broad range of frequencies whilst remaining stable and consistent with each MuteClip XP. The extended profile helps to accommodate varying joist and room depths whilst never compromising in performance.

MuteClip is unique in its design with its dual density rubber polymers that are designed and assembled to improve noise reduction over a broad range of frequencies whilst remaining stable and consistent with each MuteClip. Requiring only a single fixing, the MuteClip looks to minimize the points of contact with both wall and ceiling partitions.

MuteMat OSF 750-05 is our highly effective and slim resilient layer available for the reduction of impact noise in concrete constructions. It's density gives minimal compression leaving you a long lasting and effective solution that can receive a wide range of floor finishes.

MuteMat® Gym B34 is our highly recycled base layer for our gym flooring systems. When used in a system as a base layer it offers significant improvement and protection against impact sounds transferring through the floor. Primarily used in free-weight areas and spaces where high levels of impact are expected. This product is suitable for professional and commercial gyms.

MuteMat 2 is two-ply, high performing resilient floor mat achieving a superior impact attenuation in both timber and concrete structures, as well as high mass to reduce airborne noise which is suitable for all building types. MuteMat 2 comprises of two materials, a 6mm PE crosslinked foam (closed-cell) which is in contact with the surface, and a 7.5kg per m2 Mass Loaded Vinyl.

Tecsound SY70 is a visco-elastic membrane, and this means it is both a viscous material, part way between a solid and a liquid, having elastic properties, meaning that it returns to its original form when stress is within its limits, like pulling an elastic band, if you pull it too hard it will break. Tecsounds sweet spot for damping or 'muting' vibration does not often go into these 'stresses' in the majority of projects that need control over vibration.

Tecsound SY50 is a visco-elastic membrane, and this means it is both a viscous material, part way between a solid and a liquid, having elastic properties, meaning that it returns to its original form when stress is within its limits, like pulling an elastic band, if you pull it too hard it will break. Tecsounds sweet spot for damping or 'muting' vibration does not often go into these 'stresses' in the majority of projects that need control over vibration.

Tecsound S100 is a self-adhesive, visco-elastic membrane used to attenuate airborne noise with fantastic results. It can be applied directly to walls, floors and ceilings as well as applying directly to metal work to significantly reduce vibration within a structure.

Tecsound SY50 ALU (Aluminium Faced) is a self-adhesive, visco-elastic membrane with an aluminium facing which acts is a decorative facing especially in industrial settings. This helps to reduce airborne and vibration in multiple ways including; floor, ceiling, walls and applying directly to metal work for optimum reduction in vibration.